Ahmed Salem

Ahmed Salem

Auto-generated profile, based on publicly available information

Ahmed Salem

Department of Engineering Sciences, University of Agder, Grimstad, Norway

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 July 2020 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
ASAhmed Salem
Ahmed Salem
KHKhang Huynh
Khang Huynh
KRKjell G. Robbersmyr
Kjell G. Robbersmyr
MNMargarita Norambuena
Margarita Norambuena
Jose RodriguezJose Rodriguez
Jose Rodriguez
Multilevel inverters have gained increasing interest for advanced energy-conversion systems due to their features of high-quality produced waveforms, modularity, transformerless operation, voltage and current scalability, and fault-tolerant operation. However, these merits usually come with the cost of a high number of components. Over the past few years, proposing new multilevel inverters with a lower component count has been one of the most active topics in power electronics. The first aim of this work is to update and summarize the recently developed multilevel topologies with a reduced component count, based on their advantages, disadvantages, construction, and specific applications. Within the framework, both single-phase and three-phase topologies with symmetrical, and asymmetrical operations are taken into consideration via a detailed comparison in terms of the used component count and type. The second objective is to propose a comparative method with novel factors to take component ratings into account. The effectiveness of the proposed method is verified by a comparative study.

2 May 2022 in IEEE Access
Verified
Journal Article
Open access
ASAhmed Salem
Ahmed Salem
KHKhang Huynh
Khang Huynh
IJImmanuel Ninma Jiya
Immanuel Ninma Jiya
KRKjell G. Robbersmyr
Kjell G. Robbersmyr
This paper proposes a novel three-phase transformer-based multilevel inverter (MLI) topology to maximize the output voltage levels for high-power high-voltage applications while reducing component counts as compared to its transformer-based counterparts. The proposed hybrid topology is formed by connecting a three-level T-type module with full H-bridge cells through single-phase transformers. The T-type module is fixed while the full H-bridge cell can be repeated for enlarging the output voltage levels without increasing the voltage stress on switches. Key features of the proposed topology include low part count, capacitor-free, diode-free, voltage boosting, simple control, and modularity. Within the framework, a simple low-frequency pulse width modulation (LFPWM) switching scheme is used to control the output voltage, and the working principle is detailed for seven-, nine-, and N-level operation. The operability and performance of the proposed topology are numerically verified and experimentally validated at different loads. Moreover, its conversion efficiency is experimentally examined. Finally, a comparative study with existing transformer-based MLI circuits is conducted to prove its key merits.

23 November 2023 in IEEE Access
Verified
Journal Article
Open access
IJImmanuel Ninma Jiya
Immanuel Ninma Jiya
ASAhmed Salem
Ahmed Salem
KHKhang Huynh
Khang Huynh
RPRaimondas Pomarnacki
Raimondas Pomarnacki
This research introduces an innovative converter system which has been developed to seamlessly incorporate multiple sources of renewable energy into both DC and AC grids. The integration of multiple energy sources is made possible through the utilization of a unique converter system that combines a multiport DC converter topology with a multilevel inverter topology, while maintaining a low component count and hence increased overall power density and efficiency for the proposed converter system. Unlike previous literature, where each energy source needs a separate DC converter and a two-level converter is used for DC to AC conversion, this converter system features buck-boost operation, superior power quality characteristics, and fewer components. The system suggests the implementation of a DC link voltage balancing technique that relies on an auxiliary circuit to achieve equilibrium in the voltage on the DC link, as a possible substitute to the more complicated control-based balancing scheme. The operational integrity of the converter system is assessed through rigorous numerical simulations and experimentally validated using OPAL-RT’s OP5700 hardware-in-the-loop (HIL) implementation platform as well as an in-house experimental test setup.

4 June 2020 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
ASAhmed Salem
Ahmed Salem
KHKhang Huynh
Khang Huynh
KRKjell G. Robbersmyr
Kjell G. Robbersmyr
MNMargarita Norambuena
Margarita Norambuena
Jose RodriguezJose Rodriguez
Jose Rodriguez
In this article, a novel multilevel topology for three-phase applications, having three-level and hybrid N -level modular configurations, enabling low-, medium-, and high-voltage operations, is presented. The proposed topology has several attractive features, namely reduced component count, being capacitor-, inductor-, and diode-free, lowering cost, control-complexity, and size, and can operate in a wide range of voltages and powers. Selected simulation and experimental results are presented to verify the performance of the proposed topology. Further, the overall efficiency of the topology and loss distribution in switches are studied. Finally, the key features of the proposed topology in terms of component count, blocking voltage, and dc-link requirements are highlighted via a comparative study.

24 February 2021 in IEEE Access
Verified
Journal Article
Open access
ASAhmed Salem
Ahmed Salem
KHKhang Huynh
Khang Huynh
KRKjell G. Robbersmyr
Kjell G. Robbersmyr
This paper proposes a novel three-phase topology with a reduced component count for low- and medium-voltage systems. It requires three bidirectional switches and twelve unidirectional switches for producing four-level voltages without using flying capacitors or clamping diodes, reducing the size, cost, and losses. Removing flying capacitors and clamping diodes allows it to simplify control algorithms and increase the reliability, efficiency, and lifetime. A modified low-frequency modulation (LFM) scheme is developed and implemented on the proposed topology to produce a staircase voltage with four steps. Further, a level-shifted pulse width modulation (LSPWM) is used to reduce the filter size and increase the output voltage controllability. In this study, a voltage balancing control algorithm is executed to balance the DC-link capacitor voltages. The performance of the proposed topology is numerically demonstrated and experimentally validated on an in-house test setup. Within the framework, the power loss distribution in switches and conversion efficiency of the proposed circuit are studied, and its main features are highlighted through a comparative study.

7 December 2021 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
IJImmanuel Ninma Jiya
Immanuel Ninma Jiya
AAAhmed Mohamed Salem Ali
Ahmed Mohamed Salem Ali
KHKhang Huynh
Khang Huynh
NKNand Kishor
Nand Kishor
RCRade Ciric
Rade Ciric
In this article, a novel nonisolated multiple input dc-dc converter (MIC) is proposed for all-electric hybrid energy storage systems. The proposed MIC is capable of bidirectional operation in noninverting buck–boost configuration and can accommodate the simultaneous energy transfer from multiple sources of different voltage levels to the dc bus. As compared to counterparts, the proposed MIC utilizes a smaller number of inductors and requires only one bidirectional switch to integrate any extra energy storage. Within the framework, a novel voltage transformation, operation modes, and control method are presented in detail. The performance and key features of operation with varying voltage levels and duty cycles of the proposed MIC are numerically verified through a high-fidelity hardware-in-the-loop platform and experimentally validated on an in-house test rig.