Layla Ali Mohammed Saleh

Layla Ali Mohammed Saleh

Auto-generated profile, based on publicly available information

Layla Ali Mohammed Saleh

University of Kerbala

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 November 2018 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
LSL A Saleh
L A Saleh
Seepage under hydraulic structures is considered to be a dangerous phenomenon which may cause the collapse of the structure over time if neglected. In this research, a SEEP/W model was developed to find the seepage rate and exit gradient under a concrete dam provided with two sheet piles. The independent variables were head difference; coefficient of soil permeability; and the spacing, lengths, and inclined angles of the sheet piles. The model was run for three different values of each independent variable. The results obtained from SEEP/W model were then used to create two neural artificial network (ANN) models (A and B) in which the output variables were the seepage rate (model A) and exit gradient (model B). The most appropriate structure, which gave minimum relative errors, was (7 3 1) nodes for both models. The results of the ANN models indicated that the variable with the most effect on seepage rate was the coefficient of soil permeability, with an importance ratio of about 76%, followed by the difference in the head (8%), the distance between piles (5.5%), length of downstream pile (5%), length of upstream pile (4%), and downstream and upstream inclined angles of the sheet piles, with ratios of about 1% and 0.5%. In terms of exit gradient, the most influential factor was the distance between piles at 35%, followed by the downstream inclination angle, length of downstream pile, head difference, length of upstream pile, inclined angle of upstream pile, and soil permeability with importance of about 23%, 19%, 14%, 7.5%, 1% and 0.5%, respectively. These results are in agreement with an analysis of the SEEP/W model.

14 June 2018 in International Journal of Engineering & Technology
Verified
Journal Article
Open access
SMSumayah Amal Al-Din Majeed
Sumayah Amal Al-Din Majeed
LSLayla Ali Mohammed Saleh
Layla Ali Mohammed Saleh
GAGafel Aswed
Gafel Aswed
This study aims to investigate the relationship between the water quality index (WQI) for irrigation purposes and four independent climate variables. Our case study was conducted on the Euphrates River within Karbala city, Iraq over the period between 2008 to 2016. The Bhar-gava WQI was calculated using nine physicochemical parameters, the electrical conductivity (EC), total dissolved solids, turbidity, pH, and calcium, magnesium, sodium, chloride and sulfate levels. The Bhragava WQI classified the Euphrates river as generally "good". Artificial neural network (ANN) and non-linear regression models were developed and used to forecast the relationship between the WQI and four independent climate variables (temperature, relative humidity, and rainfall depth and sunshine duration). The non-linear regression model was adopted to predicate the WQI because the coefficient of determination and minimum error value were better than those obtained with the ANN model. The non-linear model matched the calculated Bhargava WQI values and recorded meteorological data with a coefficient of determination (R2) = 78.2 and standard error = 2.1.

6 July 2024 in Tikrit Journal of Engineering Sciences
Verified
Journal Article
Open access
PDF file
LSLayla A. M. Saleh
Layla A. M. Saleh
SKSaleh Khassaf
Saleh Khassaf
Stilling basins are built in conjunction with dams, weirs, and gates to dissipate the high kinetic energy of incoming flow and prevent severe scouring of the downstream riverbed. Dissipation of this high energy can be achieved through forming a hydraulic jump. The hydraulic jump features, including the relative length, ratio of sequent depth, and energy dissipation, are utilized as criteria to evaluate the efficiency of the stilling basin operation. The present study involved conducting experimental and numerical tests to evaluate the performance of the USBR II stilling basin downstream of an ogee spillway using six upstream Froude numbers ranging between 6.37 and 14.97. Experiments were conducted for the Typified USBR II stilling basin. The results were used to perform mesh sensitivity for numerical simulation. The USBRII stilling basin with different rough beds was numerically simulated using FLOW-3D software. The rough beds were designed using three roughness intensities, 10%, 15%, and 22%, and three relative roughness heights: 1, 0.75. and 1. According to the numerical results, distributing staggered cubic elements in the bed of the USBR II stilling basin at 10% intensity and a relative roughness height of (1) enhanced the stilling basin performance compared to the smooth bed and other rough beds. In the case of the best roughness bed, the sequent depth ratio decreased by about 12.1%, and the energy dissipation enhanced by around 5.1% compared to the Typified basin.

3 January 2025 in International Journal of Environmental Studies
Verified
Journal Article
Closed access
HAHayder Algretawee
Hayder Algretawee
SMSumayah A. Majeed
Sumayah A. Majeed
FAFatin A. Alnasrawi
Fatin A. Alnasrawi
AFAhmed M. Faris
Ahmed M. Faris
LSLayla A. Mohammed Saleh
Layla A. Mohammed Saleh