1 January 2020 in Vadose Zone Journal
The eddy covariance method estimates the energy flux of latent heat for evapotranspiration. However, imbalance between the land surface energy output and input is a well‐known fact. Energy balance closure is most commonly not achieved, and therefore the eddy covariance method potentially underestimates actual evapotranspiration. Notwithstanding, the method is one of the most established measurement techniques for estimating evapotranspiration. Here, evapotranspiration from eddy covariance (ET EC ) is cross‐checked with evapotranspiration calculated as the residual of the water balance (ET wb ). The water balance closure using ET EC is simultaneously validated. Over a 6‐yr period, all major terms of the water balance are measured including precipitation, recharge from percolation lysimeters, and soil moisture content from a cosmic‐ray neutron sensor, a capacitance sensor network, and time domain reflectometry (TDR), respectively. In addition, we estimate their respective uncertainties. The study demonstrates that both monthly and yearly ET EC and ET wb compare well and that the water balance is closed when ET EC is used. Concurrently, incoming available energy (net radiation minus ground heat flux) on average exceeds the turbulent energy fluxes (latent heat flux and sensible heat flux) by 31%, exposing the energy–surface imbalance. Consequently, the imbalance in the energy balance using the eddy covariance method must, to a lesser degree, be caused by errors in the latent heat estimates but can mainly be attributed to errors in the other energy flux components.
31 July 2023 in Hydrology and Earth System Sciences
This study evaluates water and energy fluxes and variables in combination with parameter optimization of version 5 of the state-of-the-art Community Land Model (CLM5) land surface model, using 6 years of hourly observations of latent heat flux, sensible heat flux, groundwater recharge, soil moisture and soil temperature from an agricultural observatory in Denmark. The results show that multi-objective calibration in combination with truncated singular value decomposition and Tikhonov regularization is a powerful method to improve the current practice of using lookup tables to define parameter values in land surface models. Using measurements of turbulent fluxes as the target variable, parameter optimization is capable of matching simulations and observations of latent heat, especially during the summer period, whereas simulated sensible heat is clearly biased. Of the 30 parameters considered, the soil texture, monthly leaf area index (LAI) in summer, stomatal conductance and root distribution have the highest influence on the local-scale simulation results. The results from this study contribute to improvements of the model characterization of water and energy fluxes. This work highlights the importance of performing parameter calibration using observations of hydrologic and energy fluxes and variables to obtain the optimal parameter values for a land surface model.
15 January 2026 in Biogeosciences
This study integrates process-based hydrological modeling and empirical CO2 flux modeling at a daily temporal resolution to evaluate how peatland hydrology influence CO2 emissions under scenarios of rewetting and climate change. Following the calibration of a three-dimensional transient physically-based hydrological model for a peat-dominated catchment, daily groundwater table dynamics were simulated to represent hydrological conditions in drained peat soils. These simulations were coupled with an empirical CO2 flux model, developed from a comprehensive daily dataset of groundwater table depth, temperature, and soil CO2 flux measurements. The empirical CO2 flux model captures a clear temperature-dependent response of soil CO2 emissions to variations in groundwater table depth. By applying this coupled modeling framework, we quantified CO2 emissions at daily timescales. The results demonstrate that incorporating both temperature sensitivity and high-resolution temporal variability in water level significantly influences projections of CO2 fluxes. Especially the co-occurrence of elevated air temperature and low groundwater table significantly influence CO2 emissions under scenarios of rewetting and climate change. These insights highlight the importance of including changing climate conditions in future peatland management strategies for emission inventories. The study illustrates the value of combining detailed hydrological simulations with emission models. It also emphasizes the need for detailed monitoring of greenhouse gas emissions across multiple sites and the development of robust empirical models that can be generalized and spatially upscaled.
25 June 2025 in EGUsphere
This study integrates process-based hydrological modeling and empirical CO2 flux modeling at a daily temporal resolution to evaluate how peatland hydrology influence CO2 emissions under scenarios of rewetting and climate change. Following the calibration of a three-dimensional transient groundwater flow model for a peat-dominated catchment, daily groundwater table dynamics were simulated to represent hydrological conditions in drained peat soils. These simulations were coupled with an empirical CO2 flux model, developed from a comprehensive daily dataset of groundwater table depth, temperature, and soil CO2 flux measurements. The empirical CO2 flux model captures a clear temperature-dependent response of soil CO2 emissions to variations in groundwater table depth. By applying this coupled modeling framework, we quantified CO2 emissions at daily timescales. The results demonstrate that incorporating both temperature sensitivity and high-resolution temporal variability in water level significantly influences projections of CO2 fluxes. Especially the co-occurrence of elevated air temperature and low groundwater table significantly influence CO2 emissions under scenarios of rewetting and climate change. These insights highlight the importance of including changing climate conditions in future peatland management strategies for emission inventories. The study illustrates the value of combining detailed hydrological simulations with emission models. It also emphasizes the need for detailed monitoring of greenhouse gas emissions across multiple sites and the development of robust empirical models that can be generalized and spatially upscaled.
19 July 2022 in EGUsphere
This study evaluate water and energy fluxes and variables in combination with parameter optimization of the state-of-the-art land surface model Community Land Model version 5 (CLM5), using six years of hourly observations of latent heat flux, sensible heat flux, groundwater recharge and soil moisture. The results show that multi-objective calibration in combination with truncated singular value decomposition and Tikhonov regularization is a powerful method to improve the current practice of using look-up tables to define parameter values in land surface models. Furthermore, reliability of the optimized model parameters can be estimated by statistical measures such as identifiability and relative error variance reduction. As in most other eddy covariance studies, closure of the land surface energy balance is not achieved on observation data. However, using direct measurement of turbulent fluxes as target variable, the parameter optimization is capable of matching simulations and observations of latent heat, especially during the summer period, while simulated sensible heat is clearly biased. The fact that CLM5 is not capable of matching sensible heat, not even with advanced parameter optimization of model parameter values, suggests that the lack of energy closure is due to biases in the sensible heat flux. The results from this study contribute to improvements in model characterization of water and energy fluxes. It is underlined that parameter calibration using available observations of hydrologic and energy fluxes and variables is necessary to obtain the optimal parameter set of a land surface model.