25 May 2023 in IEEE Transactions on Microwave Theory and Techniques
In this work, we describe a complete step-by-step workflow to apply machine-learning (ML) classification for chipless radio-frequency identification (RFID) tag identification, covering: 1) the tag implementation criteria for circular ring resonator (CRR) and square ring resonator (SRR) arrays for ML interoperability; 2) the data collection procedure to get a sufficiently representative dataset of real measurements; 3) the ML techniques to visualize the data and reduce its dimensionality; 4) the evaluation of the ML classifier to ensure high-accuracy predictions on new measurements; and 5) a thresholding scheme to increase the certainty of the predictions. The differences in the tags’ frequency responses are maximized by optimizing the Hamming distance between the tag identifiers (IDs) and by controlling each resonator array’s radar cross section (RCS) level. We show that the proposed workflow achieves perfect accuracy for the identification of four tags at a fixed distance of 160 cm. We also evaluate the performance of the proposed workflow to identify up to 16 tags within a flexible range (up to 140 cm), showcasing the tradeoff between the number of tags that can be correctly classified based on the reading range.
28 January 2021 in IEEE Transactions on Industrial Electronics
A scalable system for wireless wear monitoring in a distributed harsh industrial environment, in which installation of the electronic equipment near the distributed wearing measuring locations is unfeasible, has been successfully designed, developed and deployed. The system is composed of a novel LC -type passive wireless wear sensor system, a sensor readout coil, an electronic equipment, a readout unit for a scalable multisensor system and a control and monitoring system. The capacitor structure, employed as a sensing device in the LC sensor manufactured on low cost PCB, provides a linear response to the wear level. This allowed us to define a measuring and calibration method to suppress the cable effects from each distributed readout coil to the electronic equipment readout unit. It was possible to achieve a multiple simultaneous measurements in different sensors distributed along an industrial process without significant cabling influence. Concerning the sensor data analysis, a double Holt-Winters method with trend was used to reduce noise effects and an “experience based learning” tool was implemented in order to solve any misbehavior or time lag. Laboratory measurements and on-site operation results in an article mill indicate 1 mm precision and about 0, 5 MHz/mm sensitivity of the LC -type passive wireless wear sensor system.
25 August 2025 in IEEE Transactions on Instrumentation and Measurement
Chipless Radio Frequency Identification (RFID) offers a cost-effective and sustainable alternative to conventional RFID by eliminating integrated circuits in tags. In this work, we introduce a hybrid reader architecture for frequency-coded chipless RFID tags, combining the strengths of both time-domain and frequency-domain readers. The proposed system features a Gaussian impulse-based interrogation transmitter, realized using either a commercial impulse generator or a novel, low-cost logic gate-based impulse generator, and a Software-Defined Radio (SDR) for wideband spectral analysis during reception. This design is compact, self-contained, and low-cost, making it well-suited for large-scale deployments. Experimental evaluations demonstrate reliable resonance detection and tag identification, with results closely matching those from a Vector Network Analyzer (VNA). The reader achieves 1 MHz–6 GHz coverage and completes full-spectrum measurements in under 800 ms, showing less than 1.09% frequency deviation compared to the VNA. Furthermore, using the proposed reader, a machine learning-assisted tag identification experiment was conducted, yielding robust tag classification under noisy conditions, with accuracies of up to 98%.
1 January 2003 in Noise Control Engineering Journal
The low-frequency broadband noise generated by an air-conditioning unit on a railway vehicle may be significant in situations where the vehicle is stopped or its speed is low. Low-frequency acoustic radiation is extremely difficult to attenuate using passive means, so in this work, active noise control (ANC) techniques were applied. Laboratory experiments were performed in which noise from two different sources, namely from loudspeakers and an axial fan, was introduced into a real air-conditioning duct, identical to that installed on a subway vehicle. The control approach used a doubled, single-input, single-output (SISO), feedforward, filtered-X LMS algorithm. Control algorithms were designed using the Matlab-Simulink program and the Real Time Windows Target toolbox of Matlab in order to run the ANC in real time. Attenuations of 15-20 dB at the error microphone locations were achieved when loudspeakers were used as primary noise generators. However, noise reduction was quite poor when noise was introduced via the axial fan. This was due to turbulence generated by the airflow, which has a negative influence on the performance of the control system.
1 January 2026 in IEEE Sensors Journal