Steel surface can be polished after its plasma electrolytic nitriding using the same electrolyser. Medium carbon steel is nitrided in the aqueous solution containing ammonium chloride and ammonium nitrate under stationary heating at 750°C for 5 min. The surface roughness is shown to decrease from 4.5 to 1.9 µm due to plasma electrolytic polishing during 2 min using the mode of current interruption without changing the structure of the diffusion layers.
The structure of Ti6Al4 V alloy, its microhardness, surface roughness and corrosion resistance after anodic plasma electrolytic nitrocarburising (PEN/C) in an electrolyte containing carbamide and ammonium chloride were investigated. An X-ray diffractometer and a scanning electron microscopy were used to characterise the phase composition and structure of the modified surface. The effect of processing temperature on the corrosion resistance of the PEN/C samples was examined by means of potentiodynamic polarisation in Ringer’s solution. It was found that the PEN/C provides the formation of the external oxide layer (rutile) and a solid solution of carbon and nitrogen in titanium with martensite structure after quenching in the electrolyte. The microhardness of the layer is 740 HV; the surface roughness decreases from 1 to 0.63 μm. Corrosion resistance in Ringer’s solution does not deteriorate after anodic PEN/C at low temperature.
1 March 2012 in Surface Engineering and Applied Electrochemistry