The applicability of leading-edge protuberances as a passive flow control approach inspired by humpback whale flippers has attracted significant research attention in aquatic and aeronautic systems because of their influence on critical hydrodynamic and aerodynamic aspects. An experimental investigation is conducted in a cavitation tunnel under various flow conditions to determine the effectiveness of leading-edge protuberances in controlling the detrimental effects of cavitation and suppressing flow-induced noise. The experiments are carried out on four National Advisory Committee for Aeronautics airfoil 0012 hydrofoils at 7° attack angles and free stream velocities up to 10 m/s. One of the four hydrofoils is considered the baseline, while the other models have wavy leading-edge modifications with different sinusoidal protuberances. These geometry modifications are defined by the amplitudes (A) (2% and 4% of the mean chord length) and wavelengths (λ) (12.5% and 25% of the mean chord length) of the sinusoidal protuberances. Investigations of flow over hydrofoils from top and side views at various Reynolds numbers exhibit that cavitation first appears in the modified hydrofoils' troughs and is restricted to just behind the protuberance troughs for the entire cavitating flow range. These results contrast the baseline geometry, where cavitation inception occurs at the flat leading edge, and the sheet cavity expands spanwise with extensive cloud shedding. Image processing under certain conditions reveals that the protuberances reduce cavitation by 25%–60%. The analysis of the sound pressure level demonstrates that the leading-edge protuberances effectively decrease flow-induced noise at higher flow velocities when cavitation is the dominant noise source. Finally, the direct comparison of cavitating flow characteristics, quantitative cavitation measurements, and noise production analysis between the baseline and modified hydrofoils, and their comparison among the modified geometries, provides a significant reference for future modeling of potential applications employing this passive flow control technique.
Cavitation affects engineering applications relating to aquatic operations. Tip vortex cavitation (TVC) leads to several technical problems, such as efficiency loss and noise. Hence, there is a need for a comprehensive understanding of the formation mechanism, shape distortions, and underlying physical phenomena of TVC. The dispersion relation of inertial waves on inviscid cavitating vortices is a valuable tool for predicting various TVC shapes. This study explains the patterns of flow around the tip of an elliptical foil and the cavity shape deformations under different flow conditions through experimental analysis. Experiments are conducted using a National Advisory Committee for Aeronautics hydrofoil in the cavitation tunnel at Chungnam National University. The appearance, development, and shapes of vortex cavitation are closely examined using high-speed imaging technology. There is good agreement between the vortex cavity shapes captured by this high-speed imaging and those derived in previous studies. Using laser Doppler velocimetry (LDV) measurements and analysis through image processing of high-speed images, we compare the vortex core trajectories in cavitating and non-cavitating conditions. There is a good match between the two, demonstrating the feasibility of predicting the flow behaviors around vortex cavities using LDV data. As the noise from the TVC is considered a significant source of underwater radiated noise we also measured sound pressure level, which exhibits abrupt changes at specific cavitation numbers, supporting the occurrence of the singing vortex phenomenon and highlighting its sensitivity to small variations in flow conditions. Furthermore, we obtain precise measurements of the instantaneous TVC diameter under different cavitation numbers, allowing the physical functionality of distinct TVC shapes to be determined. Our results significantly extend the scientific understanding of the flow around TVC and the fundamental causes of TVC distortions.
By incorporating leading-edge (L-E) protuberances inspired by humpback whale flippers, this study enhances hydrodynamic performance, mitigates cavitation effects and develops efficient models to minimise noise emissions in aquatic systems. Experimental and numerical simulations are conducted on four semi-elliptical NACA 16020 three-dimensional (3-D) hydrofoils, including a baseline hydrofoil and three modified versions featuring sinusoidal L-E alterations. These alterations encompass amplitudes of 2 %, wavelengths of 8.33 % and 4.1667 % of the mean chord length (C), and wavenumbers of 12 and 6. Experimental analysis encompassing both cavitational and non-cavitational regimes at varying attack angles revealed significant relationships between the hydrodynamic performance and partial sheet cavitation. Hydrodynamic force analysis shows that hydrofoils with L-E protuberances generate elevated lift at moderate and high angles of attack (AOA) in cavitating and non-cavitating conditions. Under lower-severity cavitating conditions, models with L-E protuberances exhibit no significant reduction in sound pressure level. In contrast, at higher severity, the presence of L-E protuberances effectively reduces the flow-induced noise, with partial cavities covering 30 %–50 % of the chord. Numerical simulations were conducted to investigate the turbulent kinetic energy (TKE) distribution and the presence of counter-rotating vortices on each protuberance. The results reveal a significantly enhanced TKE around the trough area and the presence of counter-rotating vortices at each protuberance peak. The more realistic asymmetric design performed better than the other modifications regarding hydrodynamic force, whereas the symmetric model with wavelengths of 8.33 % excelled at cavitation and noise suppression. Therefore, this study offers promising avenues for advancing hydrofoil design in diverse engineering domains.
This study presents a thorough comparative analysis of non-cavitating and cavitating flows around a two-dimensional National Advisory Committee for Aeronautics airfoil (NACA) 0012 hydrofoil, focusing on flow behavior at different cavitation numbers while maintaining a constant Reynolds number. The experiments, conducted at Chungnam National University's cavitation tunnel, employ Particle Image Velocimetry to capture and analyze the flow dynamics under both regimes. The Reynolds number ranges from 5.8 × 105 to 7.2 × 105, with cavitation numbers (σ) ranging from 4.2 to 3.1 under cavitating conditions and 8.4 to 6.6 under non-cavitating conditions. The results indicated that cavitation substantially influences flow structures, forming re-entrant jets, intensifying shear zones, and increasing vortex shedding. As the cavitation length expands from 0.05 C to 0.4 C with decreasing σ, regions of heightened shear strain are observed between 0.2 and 0.65 C. The flow under non-cavitating conditions demonstrates smoother, more consistent behavior, with vortices concentrated near the trailing edge beyond 0.5 C. Detailed analyses of vector tracking, Q-criterion, and vorticity further clarify the complex interactions between cavitation and vortex dynamics, providing a comprehensive understanding of cavitating flows' turbulent behaviors and instabilities. This research offers new insights into the impact of cavitation on hydrofoil performance by maintaining a constant velocity while varying cavitation numbers. It contributes to a more profound understanding of cavitation phenomena and their implications for design and performance optimization in marine and industrial applications. These findings are essential for advancing mitigation strategies and enhancing the efficiency of hydrofoil-based systems in environments prone to cavitation.
The vortex-induced vibrations (VIVs) caused by a fluid flowing over a cylindrical structure present a significant challenge in engineering applications, often leading to structural fatigue and failure. This study investigates the effectiveness of three-start spiral helical strakes in suppressing vortex shedding around a cylindrical body. Flow fields are analyzed for semielliptical strake shapes using particle image velocimetry, and experiments are conducted at Reynolds numbers ranging from 0.97 × 105 to 1.32 × 105 to determine how helical strakes suppress vortex shedding. The analysis focuses on four distinct planes (0°, 30°, 60°, and 90°), corresponding to different alignments of the strake with the cylinder centerline. By comparing the velocity components in both the parallel (X) and transverse (Y) directions, the mechanisms behind vortex-shedding suppression are identified through examinations of the vorticity, averaged streamlines, Q-criterion, and turbulent kinetic energy. The results show that the helical strakes significantly reduce vortex shedding, effectively altering the flow dynamics and improving the efficiency of vortex suppression. The semielliptical helical strakes substantially weaken the von Kármán vortex street, broaden and stabilize the wake, and reduce peak in-plane turbulent kinetic energy by 30%–40% at the highest Reynolds number. These findings provide valuable insights into passive flow-control strategies, offering a practical approach to mitigating sources of VIV in cylindrical structures across various engineering applications. Because the influences of helical strakes and Reynolds-number effects had to be thoroughly established (in Paper I) before geometry-dependent behavior could be meaningfully interpreted (in Paper II), the study was separated into two coordinated parts to present each component with the clarity and depth it requires. Paper I established a physical base for further exploring the role of strake geometry, which is systematically addressed in Paper II.
This study investigates the physical mechanism by which bio-inspired sinusoidal leading-edge protuberances induce flow compartmentalization and suppress coherent trailing-edge vortex formation in hydrofoil flow. Experiments were conducted in a cavitation tunnel using two-dimensional hydrofoils, including a baseline NACA 0012 and an L-E modified counterpart incorporating sinusoidal leading-edge tubercles. Particle image velocimetry (PIV), high-speed flow visualization, and laser Doppler velocimetry (LDV) were employed to characterize both cavitating and non-cavitating conditions. Under non-cavitating conditions, the baseline hydrofoil exhibits a distinct coherent trailing-edge vortex associated with strong shear-layer roll-up and wake unsteadiness. In contrast, the L-E modified hydrofoil shows a substantially weakened or absent dominant trailing-edge vortex. A combined PIV–LDV analysis near the leading edge, supported by Piecewise Cubic Hermite Interpolating Polynomial (PCHIP) reconstruction, reveals that the sinusoidal leading edge generates localized streamwise acceleration behind the trough regions, accompanied by wall-normal deflection, spanwise momentum redistribution, and a trough-centered counter-rotating vortex pair. These coupled motions reorganize the near-wall flow into compartmentalized three-dimensional structures, weaken the spanwise coherence of the developing boundary layer and shear layer, and thereby suppress coherent trailing-edge vortex formation. Under cavitating conditions, the same mechanism confines vapor structures primarily to the trough regions, inhibits spanwise cavity merging, and fragments large-scale cloud shedding into smaller localized cavities. The results demonstrate that sinusoidal leading-edge protuberances act as an effective passive flow-reorganization mechanism, simultaneously suppressing coherent trailing-edge structures and promoting cavitation compartmentalization through early three-dimensional momentum redistribution.