1 October 2023 in Physics of Fluids
Cavitation affects engineering applications relating to aquatic operations. Tip vortex cavitation (TVC) leads to several technical problems, such as efficiency loss and noise. Hence, there is a need for a comprehensive understanding of the formation mechanism, shape distortions, and underlying physical phenomena of TVC. The dispersion relation of inertial waves on inviscid cavitating vortices is a valuable tool for predicting various TVC shapes. This study explains the patterns of flow around the tip of an elliptical foil and the cavity shape deformations under different flow conditions through experimental analysis. Experiments are conducted using a National Advisory Committee for Aeronautics hydrofoil in the cavitation tunnel at Chungnam National University. The appearance, development, and shapes of vortex cavitation are closely examined using high-speed imaging technology. There is good agreement between the vortex cavity shapes captured by this high-speed imaging and those derived in previous studies. Using laser Doppler velocimetry (LDV) measurements and analysis through image processing of high-speed images, we compare the vortex core trajectories in cavitating and non-cavitating conditions. There is a good match between the two, demonstrating the feasibility of predicting the flow behaviors around vortex cavities using LDV data. As the noise from the TVC is considered a significant source of underwater radiated noise we also measured sound pressure level, which exhibits abrupt changes at specific cavitation numbers, supporting the occurrence of the singing vortex phenomenon and highlighting its sensitivity to small variations in flow conditions. Furthermore, we obtain precise measurements of the instantaneous TVC diameter under different cavitation numbers, allowing the physical functionality of distinct TVC shapes to be determined. Our results significantly extend the scientific understanding of the flow around TVC and the fundamental causes of TVC distortions.
28 February 2019 in Journal of Ocean Engineering and Technology
The vortex flow behind a bluff body has been a subject of interest for a very long time because of its engineering applicability such as to vortex induced vibration. In the near wake of a bluff body, vortices are periodically shed in two shear layers, which originate in the trailing edges. The far wake is made up of the classical Karman vortices, which are connected together by streamwise and spanwise vortices. These vortex formations have been studied in many experimental and numerical ways. However, most of the studies considered non-cavitating flow. In this study, we investigated cavitating flow in the wake of a two-dimensional wedge. Experiments were conducted in a cavitation tunnel of Chungnam National University. Using a particle image velocimetry (PIV), we measured the velocity fields under two different flow conditions: non-cavitating and cavitating regimes. We also investigated the vortex shedding frequencies using an absolute pressure transducer mounted on the top of the test window. Throughout the experiments, it was found that the shedding frequency of the vortex was strongly affected by cavitation, and the Strouhal number could exceed its value in the non-cavitating regime.