Xin Jin

Xin Jin

Auto-generated profile, based on publicly available information

Xin Jin

Department of Mechanical Engineering, Columbia University, New York, NY, USA

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 October 2016 in IEEE/ASME Transactions on Mechatronics
Verified
Journal Article
Open access
XCXiang Cui
Xiang Cui
WCWeihai Chen
Weihai Chen
XJXin Jin
Xin Jin
SASunil K. Agrawal
Sunil K. Agrawal
The training for both translation and rotation of the hand is desirable for patients with impairments. This paper focuses on the design and control of a 7-degree-of-freedom cable-driven arm exoskeleton (CAREX-7), used for dexterous motion (including translation and rotation) training or assistance of the whole-arm. The CAREX-7 includes an additional wrist module compared with CAREX, and eight cables are routed through the exoskeleton cuffs to drive the whole-arm motion. Based on the “assist-as-needed” paradigm, a novel wrench-field controller was designed to regulate a needed wrench (force and torque) on the hand for assisting its dexterous manipulation. Healthy subjects participated in path-tracking experiments while wearing CAREX-7. The experimental results show that the CAREX-7 with the new wrench-field controller can help the subjects to follow the path more closely, and this demonstrates the effectiveness of the device. The current design of CAREX-7 is unique and offers significant improvements and new functionality over the existing CAREX. The novel features are the following: 1) CAREX-7 is an exoskeleton for the full human arm, including shoulder, elbow, and the wrist, with new design issues; and 2) controller of CAREX-7 builds on a screw-theoretic approach and assists both translation and rotation of the hand, allowing for dexterous hand reorientation, which is required in everyday tasks.

5 June 2014 in IEEE Transactions on Neural Systems and Rehabilitation Engineering
Verified
Journal Article
Closed access
YMYing Mao
Ying Mao
XJXin Jin
Xin Jin
GDGeetanjali Gera Dutta
Geetanjali Gera Dutta
JSJohn P. Scholz
John P. Scholz
SASunil K. Agrawal
Sunil K. Agrawal
In recent years, the authors have proposed lightweight exoskeleton designs for upper arm rehabilitation using multi-stage cable-driven parallel mechanism. Previously, the authors have demonstrated via experiments that it is possible to apply “assist-as-needed” forces in all directions at the end-effector with such an exoskeleton acting on an anthropomorphic machine arm. A human-exoskeleton interface was also presented to show the feasibility of CAREX on human subjects. The goals of this paper are to 1) further address issues when CAREX is mounted on human subjects, e.g., generation of continuous cable tension trajectories 2) demonstrate the feasibility and effectiveness of CAREX on movement training of healthy human subjects and a stroke patient. In this research, CAREX is rigidly attached to an arm orthosis worn by human subjects. The cable routing points are optimized to achieve a relatively large “tensioned” static workspace. A new cable tension planner based on quadratic programming is used to generate continuous cable tension trajectory for smooth motion. Experiments were carried out on eight healthy subjects. The experimental results show that CAREX can help the subjects move closer to a prescribed circular path using the force fields generated by the exoskeleton. The subjects also adapt to the path shortly after training. CAREX was also evaluated on a stroke patient to test the feasibility of its use on patients with neural impairment. The results show that the patient was able to move closer to a prescribed straight line path with the “assist-as-needed” force field.

1 May 2015
Verified
Conference Paper
Closed access
XJXin Jin
Xin Jin
XCXiang Cui
Xiang Cui
SASunil K. Agrawal
Sunil K. Agrawal

14 July 2020 in IEEE Transactions on Neural Systems and Rehabilitation Engineering
Verified
Journal Article
Closed access
RHRand Hidayah
Rand Hidayah
LBLauri Bishop
Lauri Bishop
XJXin Jin
Xin Jin
SCSiddharth Chamarthy
Siddharth Chamarthy
JSJoel Stein
Joel Stein
SASunil K. Agrawal
Sunil K. Agrawal
Individuals with chronic hemiparesis post-stroke exhibit gait impairments that require functional rehabilitation through training. Exoskeletal robotic assistive devices can provide a user with continuous assistance but impose movement restrictions. There are currently devices that allow unrestricted movement but provide assistance only intermittently at specific points of the gait cycle. Our design, a cable-driven active leg exoskeleton (C-ALEX), allows the user both unrestricted movement and continuous force assistance throughout the gait cycle to assist the user in new walking patterns. In this study, we assessed the ability of C-ALEX to induce a change in the walking patterns of ten post-stroke participants using a singlesession training protocol. The ability of C-ALEX to accurately provide forces and torques in the desired directions was also evaluated to compare its design performance to traditional rigidlink designs. Participants were able to reach 91% ± 12% of their target step length and 89% ± 13 % of their target step height. The achieved step parameters differed significantly from participant baselines (p < 0.05). To quantify the performance, the forces in each cable’s out of the plane movements were evaluated relative to the in-plane desired cable tension magnitudes. This corresponded to an error of under 2Nm in the desired controlled joint torques. This error magnitude is low compared to the system command torques and typical adult biological torques during walking (2-4%) [1]. These results point to the utility of using non-restrictive cable-driven architectures in gait retraining, in which future focus can be on rehabilitating gait pathologies seen in stroke survivors.

13 March 2018 in IEEE Transactions on Neural Systems and Rehabilitation Engineering
Verified
Journal Article
Open access
XJXin Jin
Xin Jin
APAntonio Prado
Antonio Prado
SASunil K. Agrawal
Sunil K. Agrawal
Exoskeletons for gait training commonly use a rigid-linked “skeleton” which makes them heavy and bulky. Cable-driven exoskeletons eliminate the rigid-linked skeleton, providing a lighter and transparent design. Current cable-driven exoskeletons are aimed only at gait assistance by provide short bursts of forces to the leg during walking. It has not yet been shown if these designs are suitable for gait retraining where rehabilitative forces need to be continuously applied to the leg in response to errors from a desired movement. The goal of this study is to investigate if a cable-driven leg exoskeleton can retrain the gait of human users. Nine healthy subjects were trained by a cable-driven leg exoskeleton to walk in a new gait pattern with 30% increase in step height from their natural gait. After 40 minutes of training, the gait of the subjects became significantly closer to the target gait than before the training. In three different post-training sessions, the step height of the subjects increased by 22%, 29% and 31% on an average. In a fourth post-training session when the subjects were instructed to ignore the training and walk naturally, the step height remained increased by 11%. These results confirm the potential of cable-driven designs in gait training applications.

1 May 2017
Verified
Conference Paper
Closed access
XJXin Jin
Xin Jin
YCYusheng Cai
Yusheng Cai
APAntonio Prado
Antonio Prado
SASunil K. Agrawal
Sunil K. Agrawal
Various leg exoskeletons have been designed for gait rehabilitation. The transparency of these exoskeletons is crucial to their effectiveness in gait training. The weight and inertia of an exoskeleton are two important factors affecting its transparency. In this study, using a light-weight leg exoskeleton C-ALEX, we conducted a series of experiments to explore the effect of exoskeleton weight and inertia on the natural walking of twelve healthy subjects. They walked in C-ALEX under three levels of mass added to the leg: (i) no added mass, (ii) 1.8 kg, and (iii) 3.6 kg, and three different setups of C-ALEX: (i) freewalking without C-ALEX, (ii) with C-ALEX, and (iii) with C-ALEX compensating for the weight of the added mass. The result shows that increasing exoskeleton mass increases step length, decreases step height, and reduces maximum knee flexion. After weight compensation, the step height, and the maximum knee flexion partially restored, but the step length did not, implying that the inertia is responsible for the change in step length. The study demonstrates that compensating for weight alone cannot eliminate the changes due to exoskeleton mass. On the other hand, reducing the overall mass of the exoskeleton can better preserve the natural gait of the subjects.