20 August 2024 in Light: Science & Applications
Individual optical addressing in chains of trapped atomic ions requires the generation of many small, closely spaced beams with low cross-talk. Furthermore, implementing parallel operations necessitates phase, frequency, and amplitude control of each individual beam. Here, we present a scalable method for achieving all of these capabilities using a high-performance integrated photonic chip coupled to a network of optical fibre components. The chip design results in very low cross-talk between neighbouring channels even at the micrometre-scale spacing by implementing a very high refractive index contrast between the channel core and cladding. Furthermore, the photonic chip manufacturing procedure is highly flexible, allowing for the creation of devices with an arbitrary number of channels as well as non-uniform channel spacing at the chip output. We present the system used to integrate the chip within our ion trap apparatus and characterise the performance of the full individual addressing setup using a single trapped ion as a light-field sensor. Our measurements showed intensity cross-talk below ~10–3 across the chip, with minimum observed cross-talk as low as ~10–5.
16 March 2024 in Nature Communications
Organoid and spheroid technology provide valuable insights into developmental biology and oncology. Optical coherence tomography (OCT) is a label-free technique that has emerged as an excellent tool for monitoring the structure and function of these samples. However, mature organoids are often too opaque for OCT. Access to multi-angle views is highly desirable to overcome this limitation, preferably with non-contact sample handling. To fulfil these requirements, we present an ultrasound-induced reorientation method for multi-angle-OCT, which employs a 3D-printed acoustic trap inserted into an OCT imaging system, to levitate and reorient zebrafish larvae and tumor spheroids in a controlled and reproducible manner. A model-based algorithm was developed for the physically consistent fusion of multi-angle data from a priori unknown angles. We demonstrate enhanced penetration depth in the joint 3D-recovery of reflectivity, attenuation, refractive index, and position registration for zebrafish larvae, creating an enabling tool for future applications in volumetric imaging.
4 June 2025 in Optics Express
We demonstrate coded wavefront sensing (Coded WFS) for video-rate quantitative phase imaging and 3D refractive index (RI) tomography of biological specimens. To evaluate the accuracy, we implement an experimental setup that supports measurements of specimens with Coded WFS as well as with digital holographic microscopy (DHM) under identical conditions, enabling direct comparison. We image a static 3D phantom fabricated via additive manufacturing and a rotating HEK293 cell in an acoustofluidic chamber. Our results demonstrate good agreement between the two methods, with the advantage that, in contrast to DHM, Coded WFS enables simple integration with standard microscopes. Furthermore, we apply a standard tomographic reconstruction algorithm to the HEK293 cell data for comparison, which demonstrates the potential of Coded WFS in tomography.
4 March 2025 in Biomedical Optics Express
The advent of single molecule localization microscopy (SMLM) has transformed our capacity to investigate biological structures at the nanoscale. While the research focus has long been on improving localization precision, systematic errors caused by optical aberrations are often overlooked. In the case of 3D SMLM, such errors have the potential to significantly impair the quality of the resulting images. In this paper, we present an imaging and data processing approach that jointly estimates both, molecule positions and optical aberrations in SMLM. Therefore, the method minimizes systematic errors in SMLM reconstructions without the necessity of additional experimental calibration steps, such as the recording of fluorescent bead z-stacks. We investigate the reliability of this approach, especially in situations where the joint retrieval can be expected to be ill-posed, i.e., whenever the sample is "flat" and provides little diversity among the captured single molecule images. To enhance the reliability of the inverse problem solution, we suggest utilizing small SMLM data sets acquired at one or more slightly defocused "auxiliary" planes. We investigate the effectiveness of our approach through numerical simulations and imaging experiments of a calibration probe and nuclear pore complexes. Our method is simple and integrates seamlessly into existing SMLM setups without necessitating modifications or added complexity to the system.
2 December 2024 in bioRxiv
Optical Diffraction Tomography (ODT) has emerged as a powerful tool for imaging biological cells in a non-invasive and label-free manner. However, conventional approaches using ODT by varying the illumination are plagued by the missing cone problem, which introduces ambiguity and deteriorates the axial resolution in the reconstruction. Although utilizing object rotation has the potential to yield isotropic resolution, experimental control or prior retrieval of the rotational parameters is challenging. In this work, we demonstrate ODT of multiple-scattering samples undergoing variable rotational motion, unlocking the potential for isotropic resolution in non-contact systems. We introduce a comprehensive reconstruction method to jointly retrieve both sample and rotational motion in 3D. An interferometric setup enables the recording of amplitude and phase data while the object is rotated in a non-contact manner around one or more chosen axes in an acoustofluidic device. We evaluate the tomographic reconstruction performance of the method for clusters of micro-beads and highlight its suitability for biomedical application beyond single cells, demonstrating high-resolution reconstruction of dense cancer spheroids containing more than 100 cells.