13 July 2020 in Applied Physics Letters
We report the room temperature photoluminescence and electroluminescence properties of boron incorporated into highly strained InGaAs, forming BGaInAs, grown on GaAs substrates. X-ray diffraction was used to determine the alloy composition and strain of BGaInAs quantum wells on GaAs. As expected, the addition of boron reduced the quantum well compressive strain, preventing strain-relaxation and enabling extension of the peak emission wavelength of InGaAs quantum wells to 1.3 μm on GaAs. We also report both the longest wavelength emission observed from BGaInAs (1.4 μm) and electrically injected photoemission from a dilute-boride active region. We observed a blueshift in electroluminescence, due to unintentional in situ annealing of the active region, which we mitigated to demonstrate a path to realize true 1.3 μm emitters in the presence of in situ annealing.
17 November 2022 in Journal of Applied Physics
Highly mismatched semiconductor alloys (HMAs) offer unusual combinations of bandgap and lattice constant, which are attractive for myriad applications. Dilute borides, such as BGa(In)As, are typically assumed to be HMAs. BGa(In)As can be grown in higher alloy compositions than Ga(In)NAs with comparable bandgaps, potentially enabling routes to lattice-matched telecom lasers on Si or GaAs. However, BGa(In)As remains relatively unexplored, especially with large fractions of indium. Density functional theory with HSE06 hybrid functionals was employed to study BGaInAs with 4%–44% In and 0%–11% B, including atomic rearrangement effects. All compositions showed a direct bandgap, and the character of the lowest conduction band was nearly unperturbed with the addition of B. Surprisingly, although the bandgap remained almost constant and the lattice constant followed Vegard's law with the addition of boron, the electron effective mass increased. The increase in electron effective mass was higher than in conventional alloys, though smaller than those characteristics of HMAs. This illustrates a particularly striking finding, specifically that the compositional space of BGa(In)As appears to span conventional alloy and HMA behavior, so it is not well-described by either limit. For example, adding B to GaAs introduces additional states within the conduction band, but further addition of In removes them, regardless of the atomic arrangement.
13 October 2025 in Applied Physics Letters
Highly mismatched B-III–V alloys present a promising avenue for near-infrared (NIR), direct bandgap optoelectronics that can be integrated on GaAs or Si, owing to their ability to vary bandgap and lattice constant independently. Here, we report the epitaxial growth, fabrication, and characterization of nearly strain-free, all-BGaInAs, p-i-n photodiodes on GaAs substrates grown by molecular beam epitaxy. Incorporating boron effectively reduced the strain in InGaAs, yielding nearly lattice-matched BGaInAs layers with high surface quality, as confirmed by high-resolution x-ray diffraction and atomic force microscopy measurements. Strong photoluminescence (PL) intensity was observed for BGaInAs with up to 3.2% B (7% In). The operating wavelength consistently extended with increasing boron and indium incorporation as evidenced by PL and external quantum efficiency measurements, which agree with density functional theory predictions. Altogether, these results highlight precise control of the operating wavelength and suggest highly substitutional boron incorporation. BGaInAs photodiodes with low boron and indium concentrations demonstrated high sensitivity with low dark current. We also report the effective thermal conductivity of the BGaInAs p-i-n structures and find that the thermal conductivity is largely insensitive to boron content with dominant effects from the indium content. Altogether, these findings underscore the potential for strain-free BGaInAs photodiodes as promising candidates for high-performance NIR optoelectronics.
1 July 2026 in APL Materials
We report on experimental and theoretical studies of deep-level defects in BGaAs alloys, with a particular focus on the effects of rapid thermal annealing (RTA) on their electrical and optical properties. The n- and p-type BxGa1−xAs layers, with varying boron concentration ranging from 0% to 2.0% (dilute borides), were grown by molecular beam epitaxy on GaAs at a substrate temperature of 400 °C and subsequently ex-situ annealed at 700 °C. Deep level transient spectroscopy (DLTS) was employed to investigate the properties of deep-level defects and their evolution upon annealing. In addition, density functional theory (DFT) was used to calculate defect formation energies and charge transition levels, enabling the identification of native point defects and defect complexes observed in DLTS experiments. Based on the obtained DFT results, we discuss the origin of the observed trap levels, with particular emphasis on B-related defects. We also found that RTA significantly affected both the carrier concentration and the total trap concentration in n- and p-type BGaAs as the boron content increased. Furthermore, annealing impacts the emission properties and overall optical quality of these dilute borides.