6 October 2023 in Science Advances
Noninvasive inspection of layered structures has remained a long-standing challenge for time-resolved imaging techniques, where both resolution and contrast are compromised by prominent signal attenuation, interlayer reflections, and dispersion. Our method based on terahertz (THz) time-domain spectroscopy overcomes these limitations by offering fine resolution and a broadband spectrum to efficiently extract hidden structural and content information from layered structures. We exploit local symmetrical characteristics of reflected THz pulses to determine the location of each layer, and apply a statistical process in the spatiotemporal domain to enhance the image contrast. Its superior performance is evidenced by the extraction of alphabetic characters in 26-layer subwavelength papers as well as layer reconstruction and debonding inspection in the conservation of Terra-Cotta Warriors. Our method enables accurate structure reconstruction and high-contrast imaging of layered structures at ultralow signal-to-noise ratio, which holds great potential for internal inspection of cultural artifacts, electronic components, coatings, and composites with dozens of submillimeter layers.
5 December 2022 in Composites Science and Technology
17 October 2022 in Composites Part B: Engineering
6 May 2025 in IEEE Sensors Journal
The terahertz (THz) metamaterial sensor represents an innovative technology designed to achieve superior sensitivity for trace detection by combining the advantages of THz spectroscopy and metamaterials. Specially, the THz metamaterial sensors based on toroidal dipole resonances effectively reduce the radiative loss, making them highly promising for sensing applications. In this study, we propose a novel dual-band toroidal metamaterial consisting of an array of two sets of three strips, which induces strong field confinement between the metal strips. The electric field analysis at the resonant frequencies and the scattered power distributions of multipoles illustrate the generation of the toroidal dipole and enhanced sensing performance. Furthermore, the proposed dual-band toroidal metamaterial sensor exhibits high sensitivity to environmental perturbations, reaching up to 58GHz/RIU at mode I and 71 GHz/RIU at mode II under a 100 nm coating analyte thickness, outperforming the sensitivity of metal-insulator-metal (MIM) metamaterial. In addition, the metamaterial sample is fabricated using a maskless laser direct write lithography system, and its resonant spectra are measured using terahertz time-domain spectroscopy (THz-TDS). The sensing performance of the proposed dual-band toroidal metamaterial sensor is experimentally demonstrated through detecting SiO2 layers with varying thicknesses, with results showing strong agreement with simulations. Furthermore, the proposed sensor is utilized for detecting bovine serum albumin (BSA) concentrations in the range of 0.1 μg/mL to 100 μg/mL with a LOD of 5.4 pg/mL for mode I and 3.4 pg/mL for mode II. The proposed dual-band metamaterial sensor provides a powerful approach for THz sensing, significantly improving biosensing sensitivity.
16 December 2024 in IEEE Sensors Journal
Due to the abundant spectral characteristic of biological molecules in the terahertz (THz) region, THz metamaterials are widely used in the biosensing field. The THz technology as combined with metamaterials offers label-free and nondestructive capabilities. However, the sensitivity of THz sensors is often limited by the poor spatial overlap between the analyte and the enhanced electromagnetic field. For the conventional metamaterial sensors, the analyte is typically absorbed onto the sensor surface, while the induced hot spots are confined within the insulating layer, resulting in relatively low sensitivity. In this study, we introduce a novel and ultrasensitive metamaterial sensor consisting of a planar metal-insulator-metal (p-MIM) structure with a 1 μm air gap between two metal stripes. Unlike conventional vertical metal-insulator-metal (v-MIM) metamaterial, the p-MIM metamaterial generates highly localized enhanced fields within the air gap, enabling direct interact with the analyte. The proposed metamaterial sensor achieves a high sensitivity of 157 GHz/RIU with an analyte thickness of 1 μm, outperforming the v-MIM metamaterials by a factor of 2.27. In addition, the metamaterial sample is fabricated using a maskless laser direct write lithography system, and its resonant spectra are measured by terahertz time-domain spectroscopy (THz-TDS). The enhanced sensing performance of the proposed p-MIM metamaterial sensor is experimentally demonstrated through detecting photoresist with varying thicknesses. Moreover, the proposed metamaterial sensor is also used to detect bovine serum albumin (BSA), whose limit of detection (LOD) is 0.08 μg/mL. This work inspires more innovations to facilitate the development of biosensing devices.
8 January 2025 in Journal of Lightwave Technology
Terahertz (THz) metamaterials, capable of manipulating the incident waves, are experiencing an unprecedented developing opportunity for THz science and applications. The high-efficient fabrication technique of THz metamaterials is indeed important for the widespread THz applications in the future. Here, we utilize 3D-printing technique to fabricate all-resin THz metamaterials for arbitrary control of THz wavefront. The unit phases of the conventional metasurfaces are uncertainly correlated with the in-plane geometries, herein the propagation phases of the designed units are linearly controlled by varying the thickness of the resin bricks. Then, the rectangular pillars are designed to place on the bricks to construct units and their geometric phases are manipulated by varying the orientations of the pillars. By superposing the above propagation and geometric phases, a spin-multiplexing principle is proposed to construct the non-interleaved multiplexed holography and focusing. The 3D-printing-assisted fabrication approach allows a flexible and efficient customization of phase-gradient THz metamaterials and may inspire versatile potentials in resonance-based THz sensing, imaging and information encryption.