21 December 2022 in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
Combined voltage and frequency control is a critical control problem of modern power system to avoid blackouts. This paper discusses the simultaneous voltage and frequency control for an interconnected multi-source multi-area power system having two areas of equal generating capacity, each containing thermal, diesel, and wind units. A centralized model predictive controller (MPC) scheme is suggested to minimize voltage and frequency fluctuations. For effective control, a normalized performance criterion has been considered, and recently appeared Harris hawks optimization (HHO) algorithm has been integrated for the optimal tuning of MPC weights for the first time. The effectiveness of the proposed MPC-HHO controller has been verified after comparing its transient response performance indices with that of various existing controllers available in the literature. Quantitatively, the proposed controller yields a minimum performance index value, i.e. 0.000741, and it has been observed that the proposed MPC-HHO controlled system has 79.28%, 68.89%, 77.19%, and 81.96% better settling time for frequency deviation in area 1 when compared with PIλDF-LSA, FOIDF-LSA, MFO-FOPID, and PID-FA controllers, respectively. Further, the stochasticity in wind power generation has been considered with the help of Monte Carlo simulation of Autoregressive Integrated Moving Average model (ARIMA) model for practical wind speed data from National Renewable Energy Laboratory. The stability of the proposed controller has been verified using eigenvalues and Bode plot analysis, where the MPC-HHO controlled system was having more gain and phase margin values as compared to the PID controlled system. Furthermore, the robustness of the approach has been successfully evaluated by considering the nonlinearities, and parameter sensitivity analysis has been conducted after varying the parameters of voltage and frequency control loops and reevaluating the transient performance of the controlled system. Besides this, a separate case study wherein the most recent concepts like Electric Vehicle (EV) integration with grid and Virtual Inertia (VI) have been applied in addition to the proposed controller to provide auxiliary control support in the system. It has been validated that EV-VI coordinated MPC-HHO controller provides quality transient response under different scenarios including reduced inertia and stochastic load variations.
8 April 2021 in IETE Journal of Research
This paper discusses the modelling and control of a combined load frequency control (LFC) and automatic voltage regulator (AVR) system for a multi-area power system network with each generating area includes thermal, diesel, and solar thermal power plant. Superconducting magnetic energy storage is incorporated with the LFC loop to provide auxiliary control against instantaneous changes in active power demand. Model Predictive Controller (MPC) has been employed in this study to improve the performance of AVR and LFC loops, and controller weights are fine-tuned with the help of Harris Hawks Optimization (HHO) approach. The effectiveness of the proposed MPC-HHO algorithm has been examined by comparing its transient performance indices with that of conventional MPC, PID, FOPID, fuzzy PID, integral double derivative with derivative filter controller as well as Particle Swarm Optimization and Sine Cosine Algorithm based Model Predictive Controllers. The proposed MPC-HHO controller gives superior results than the above-mentioned controllers.
25 October 2017 in Neural Computing and Applications
16 January 2017 in Optimal Control Applications and Methods
16 January 2017 in International Transactions on Electrical Energy Systems
This paper presents a creature-inspired stud krill herd (SKH) algorithm consisting of stud selection and crossover operators, which are augmented in the krill herd algorithm to solve the optimal power flow (OPF) problems in a power system. Due to the nonlinear and nonconvex nature of the OPF problem, it is quite difficult to find optimal solution using conventional optimization algorithms. Here in SKH, a stud-selection operator is introduced in the krill herd algorithm to further enhance the quality of the solution, and crossover operator is embedded to avoid premature convergence. To investigate the performance, the proposed SKH algorithm has been demonstrated on the OPF problems of IEEE 30-bus, Algerian 59-bus, and IEEE 118-bus systems considering various objective functions such as total production cost, L-index, power loss, and emission pollution to be minimized. The OPF results have been compared with those obtained with other methods, and it has been found that SKH algorithm is successful in providing better quality solutions in reasonable execution times.
6 January 2015 in International Transactions on Electrical Energy Systems