Vanadium dioxide (VO2) undergoes a metal–insulator phase transition at ∼70 °C and has attracted substantial interest for potential applications in electronics, including those in neuromorphic computing. The vanadium–oxygen system has a rather complicated phase diagram, and controlling the stoichiometry and the phase of thin films of vanadium oxides is a well-known challenge. We explore the novel combination of two methods of VO2 thin film deposition using off-axis RF magnetron sputtering on (100)- and (111)-oriented yttria-stabilized zirconia (YSZ) substrates: reactive sputtering of vanadium in an oxygen environment and sputtering of vanadium metal followed by oxidation to VO2. Interestingly, the reactive sputtering process on both substrate orientations yields the metastable semiconducting VO2 (B) phase, which is structurally stabilized by the YSZ surface. The metal sputtering and oxidation process on YSZ produces mainly the equilibrium monoclinic (or M1) phase of VO2 that exhibits a metal–insulator transition. Using this method, we obtained thin films of (010)-textured polycrystalline VO2 (M1) that show a metal–insulator transition with an on/off ratio larger than 1000.
Electronic devices are extremely sensitive to defects in their constituent semiconductors, but locating electronic point defects in bulk semiconductors has previously been impossible. Here we apply scanning transmission electron microscopy (STEM) electron-beam-induced current (EBIC) imaging to map electronic defects in a nanowire Schottky diode. Imaging with a nondamaging 80 or 200 kV STEM acceleration potential reveals a minority-carrier diffusion length that decreases near the surface of the hexagonal nanowire, thereby demonstrating that the device’s charge collection efficiency (CCE) is limited by surface defects. Imaging with a 300 keV STEM beam introduces vacancy-interstitial (or Frenkel) defects in the that increase carrier recombination and reduce the CCE of the diode. We create, locate, and characterize a single insertion event, determining that a defect inserted 7 nm from the Schottky interface broadly reduces the CCE by across the entire nanowire device. Variable-energy STEM EBIC imaging thus allows both benign mapping and pinpoint modification of a device’s electron-hole-recombination landscape, enabling controlled experiments that illuminate the impact of both extended (one- and two-dimensional) and point (zero-dimensional) defects on semiconductor device performance.