5 June 2024 in Applied Energy
1 August 2023 in Energy Conversion and Management
14 May 2022 in Journal of Building Engineering
1 January 2022 in Robotics and Autonomous Systems
1 October 2023 in Physics of Fluids
An experimental investigation was carried out to explore the interaction and wake statistics of model wind turbines operating individually and in pairs over two-dimensional hills with varying heights. The hills shared a sinusoidal shape and extended L/D=20 in the streamwise direction, where D represents the diameter of the turbine rotor. The peak heights of the hills were H/D=0, 0.5, 1, and 1.5. The first turbine was located at the beginning of the hill development, and the second turbine was positioned halfway between the first and the hill's peak, downwind. The flow in the intermediate wake regions was characterized using particle image velocimetry, focusing on the recovery mechanisms of streamwise momentum on the windward side of the hills, ranging from gentle to steep-up slopes. The results indicate that the advection terms play a more significant role than turbulence in the wake recovery mechanism with steeper hill slopes. Associated reduced turbulence levels are attributed to flow acceleration, which led to a higher power availability at the top of the hills.
1 December 2024 in Physics of Fluids
The COVID-19 pandemic has highlighted the critical need for comprehensive studies on respiratory diseases, particularly those focusing on human coughs as a primary mode of transmission. Traditional experimental methods for studying cough dynamics often fall short in replicating the complexity of human coughs, limiting our understanding of virus transmission. This study introduces a novel and versatile cough simulator capable of replicating a wide range of human cough jet profiles with high accuracy and repeatability. The device employs a synthetic jet actuator driven by signals derived from human cough parameters, paired with an aerosol chamber and interchangeable mouthpieces. The simulator was characterized using particle image velocimetry and flow visualization techniques, demonstrating its ability to generate cough jets with peak velocities ranging from approximately 3–39 m/s and peak velocity times from 8.75 to 60.00 ms. The simulated coughs exhibit the characteristic starting-jet and interrupted-jet stages observed in human coughs. Calibration maps were developed to allow precise tuning of cough parameters, enhancing the device's versatility. The simulator's reproducibility was validated through repeated trials, showing consistent flow characteristics despite the turbulent nature of the jets. This pulsatile flow device provides a reliable and adaptable platform for studying cough-generated aerosols, contributing to a better understanding of respiratory disease transmission and the development of effective mitigation strategies.