1 November 2020 in Construction and Building Materials
17 December 2010 in Clinical Infectious Diseases
To the Editor—Ferritin plays an essential role in iron homeostasis by binding and sequestering intracellular iron [1]. It acts as an acute-phase reactant, and elevated levels are typically associated with both acute and chronic inflammatory conditions [1]. Markedly elevated levels of ferritin have been associated with various noninfectious causes, including malignancies, severe iron overload, and dialysis-dependent chronic renal failure [2]. Infections—most notably, disseminated histoplasmosis (DH)—have also been cited as an important cause of elevated ferritin levels [3], as well as of hyperferritinemia [4, 5], although this has been refuted by some authors [6].
1 January 2003 in Transportation Research Record: Journal of the Transportation Research Board
The unpaved road network of a surface mine is extensive, comprising numerous roads of varying construction and material qualities with highly variable traffic volumes. Existing haul road maintenance management systems (MMSs) work well for predictable traffic volumes, but for complex mine road networks, the MMS becomes onerous and results in suboptimal road maintenance strategies, with the attendant increase in total road-user costs and reduction in service. A real-time MMS was thus sought to overcome the deficiencies of existing systems for mine roads. Because most large mines operate trucks with onboard diagnostic data collation, linked through a centralized communication and Global Positioning System backbone, it was proposed that road condition could be monitored on a real-time basis through onboard vibration signature analysis. A real-time mine haul road MMS was developed. Mine road maintenance practices were reviewed. The real-time system architecture was devised, and a field trial was conducted of onboard vibration signature assessment. Trial results were evaluated in the light of road defect signature recognition, analysis, signature repeatability, and system limitations. This approach is applicable to other situations, such as a network of district roads, subject to an analysis of economic feasibility. The conclusion is reached that modern technology has the potential to apply maintenance as and where needed, with possible reductions in authority cost and an improvement in service provided to road users.
1 July 1994 in Journal of Transportation Engineering
The paper gives a brief literature survey on the effect of the individual properties on the compactability of untreated road‐building materials. The properties covered are the influence of the moisture content, grading (i.e., particle‐size distribution), particle shape and texture, the Atterberg limits and linear shrinkage, crushing strength and durability of the material, bearing capacity of the underlying layers, and the factors influencing the bearing capacity of the material. This is followed by an outline of the test program and laboratory procedures. The results are then discussed, showing that both the compactability and bearing capacity of untreated road‐building materials can be quantified in terms of the indicator test values and two new properties that quantify the effects of shape and texture. Using the basic model, the influence of a lack of fines, high relative densities (i.e., high specific gravities), and the plasticity of the fines on compactability are discussed. Conclusions are drawn and proposals are made in connection with the quantification of the shape and texture of untreated road‐building materials.