19 March 2025 in IEEE Transactions on Industrial Electronics
Kinematic control is one of the fundamental issues in the study of redundant robotic manipulators, and various schemes that utilize the pseudoinverse of the Jacobian have been crafted in this field. However, these schemes may be ineffective due to the lack of suppressing additive noise, especially the harmonic noise widely encountered in practice. This article proposes a new kinematic control scheme for redundant robotic manipulators affected by harmonic noise, aiming to overcome the identified limitations. Such a scheme, which incorporates the adaptive learning mechanism based on harmonic frequency, can simulate the harmonic noise, suppress its disturbance, and eventually realize the effective control purpose. It is then theoretically proven that the Cartesian error generated by the proposed scheme exhibits the convergence property, thus guaranteeing the control performance on redundant robotic manipulators even in the presence of harmonic noise. Simulation and experiment results under PA10 and Panda robotic manipulators further verify the efficacy and superiority of the proposed kinematic control scheme.
9 June 2022 in Journal of Hydroinformatics
The phenomenon of blocking pipe would appear for a trailing suction hopper dredger (TSHD) rake arm pipe in the construction process. Thus, based on the theory of particle flow mechanics, a transient three-dimensional two-phase hydrodynamic and sediment mixture model was established in this paper. Besides, different particle sizes of sediment concentration and velocity in the piping in the rake arm of the law were analyzed to solve the problem of blocking pipe and the prevention of dredging to provide theoretical support. Then, a model predictive controller was designed to regulate the mudflow in the pipeline by controlling the mud pump speed and compared with the proportional-integral (PI) controller. According to the results, the particle size of sediment affects concentration distribution in the pipeline under the same construction conditions for the TSHD. Besides, the larger the particle size of the sediment, the more significant the difference in the sediment concentration distribution in the pipeline. Similarly, the flow velocity is another influencing factor behind the change in concentration distribution in the pipeline, the increase in the flow velocity will improve the uniformity of concentration distribution in the pipeline, and the critical velocity will maintain the concentration distribution within a reasonable range. In terms of transportation control, the designed predictive model controller is capable of reducing overshoot and shorten the time required for adjustment. To sum up, the research result not only provides a valuable reference for the theoretical analysis and a controller design of the pipeline transportation system in the TSHD but also verifies the feasibility of the computational fluid dynamics model used in the study of pipeline transportation mechanisms.
13 January 2026 in IEEE Internet of Things Journal
Motion planning (MP) is one of fundamental issues in robot manipulators. Various MP schemes at joint velocity and acceleration levels are reported, but the noise impact is usually neglected. This paper presents an enhanced version of the acceleration-level MP (ALMP) method, incorporating additive noise considerations, specifically designed for robotic manipulators. Then, such an improved method, which is based on the pseudoinverse of robots’ Jacobian matrix, is theoretically proven to be robust against different types of noise. As case studies of the improved method, the noise-tolerance repetitive motion planning (NT-RMP) and the noise-tolerance minimum acceleration norm (NT-MAN) scheme are established for robot manipulators. Simulation and experiment results under the UR5 and Panda robot manipulators corrupted by different noises further validate the effectiveness and practicality of such two schemes and the improved ALMP method.
1 January 2026 in IEEE Transactions on Automation Science and Engineering
1 October 2026 in IEEE Internet of Things Journal