28 May 2017 in Journal of Applied Physics
We present a comprehensive study on the formation and tuning of the Schottky barrier of NiGeSn metallic alloys on Ge1-xSnx semiconductors. First, the Ni metallization of GeSn is investigated for a wide range of Sn contents (x = 0–0.125). Structural analysis reveals the existence of different poly-crystalline NiGeSn and Ni3(GeSn)5 phases depending on the Sn content. Electrical measurements confirm a low NiGeSn sheet resistance of 12 Ω/□ almost independent of the Sn content. We extracted from Schottky barrier height measurements in NiGeSn/GeSn/NiGeSn metal-semiconductor-metal diodes Schottky barriers for the holes below 0.15 eV. They decrease with the Sn content, thereby confirming NiGeSn as an ideal metal alloy for p-type contacts. Dopant segregation for both p- and n-type dopants is investigated as a technique to effectively modify the Schottky barrier of NiGeSn/GeSn contacts. Secondary ion mass spectroscopy is employed to analyze dopant segregation and reveal its dependence on both the Sn content and biaxial layer strain.
1 May 1997 in Journal of Applied Physics
The annealing behavior of pseudomorphic Si Ge /Si and Si Ge C /Si superlattice structures was studied in the temperature range between 750 °C and 900 °C. Carbon incorporation of 1.2% changes the thermal stability of SiGe structures significantly. It suppresses plastic relaxation due to an effective dislocation pinning. No relaxation of the SiGeC sample was observed during annealing up to 875 °C for 3 h. For comparison the SiGe sample relaxed at 800 °C. Carbon strongly increases the interdiffusion of Ge and Si. The activation energy of this diffusion process for a Ge content of 40% decreases from about 4.8 eV for the pure SiGe to about 2.0 eV with an additional C content of 1.2% assuming a neglectable diffusion of the carbon. This leads to a distinct modification of the Ge profile in the investigated temperature range.
1 February 1997 in Thin Solid Films
18 February 2016 in Applied Physics Express
A key factor for controlling Sn migration during GeSn deposition at a high temperature of 400 °C was investigated. Calculated results with a simple model for the Sn migration and experimental results clarified that low-deposition-speed (v d) deposition with v d’s of 0.68 and 2.8 nm/min induces significant Sn precipitation, whereas high-deposition-speed (v d = 13 nm/min) deposition leads to high crystallinity and good photoluminescence spectrum of the GeSn layer. These results indicate that v d is a key parameter, and that control of Sn migration at a high temperature is possible. These results are of great relevance for the application of high-quality Sn-based alloys in future optoelectronics devices.
27 August 2019 in Physical Review B
Regular surface undulations, called cross-hatch patterns, appearing at the free surface of lattice-mismatched heteroepitaxial films are a key signature of plastic relaxation. Here we show that the dynamics of cross-hatch formation is accurately described by a continuum model based on strain-mediated surface diffusion, provided that a realistic distribution of dislocations is considered. We demonstrate quantitative agreement between our time-dependent simulations and dedicated atomic force microscopy experiments on films grown on Si(001) at various thicknesses, finally shedding light on the origin and on the dynamical behavior of a widely investigated pattern, first observed more than half a century ago.
8 January 2018 in Applied Physics Letters
We present the morphological evolution obtained during the annealing of Ge strips grown on Si ridges as a prototypical process for 3D device architectures and nanophotonic applications. In particular, the morphological transition occurring from Ge/Si nanostrips to nanoislands is illustrated. The combined effect of performing annealing at different temperatures and varying the lateral size of the Si ridge underlying the Ge strips is addressed by means of a synergistic experimental and theoretical analysis. Indeed, three-dimensional phase-field simulations of surface diffusion, including the contributions of both surface and elastic energy, are exploited to understand the outcomes of annealing experiments. The breakup of Ge/Si strips, due to the activation of surface diffusion at high temperature, is found to be mainly driven by surface-energy reduction, thus pointing to a Rayleigh-like instability. The residual strain is found to play a minor role, only inducing local effects at the borders of the islands and an enhancement of the instability.