20 September 2023 in IEEE Journal of Emerging and Selected Topics in Industrial Electronics
DC-DC converters are increasingly necessary in alternative energy, industrial automation, electric vehicles, and telecommunications. Variable switching frequency DC-DC converters offer flexibility, high performance, and efficiency across a wide range of loads, with better EMI/EMC performance and dynamic response than converters with fixed switching frequency and variable duty cycle. They can also be smaller and less expensive, especially for high-frequency applications. This paper presents a new high step-down buck converter with a series capacitor for variable frequency applications. The special topology of the switches in the proposed converter results in doubling the frequency of the current and voltage ripple of the output filter. This has a significant impact on reducing the size and weight of output filter elements. The proposed converter provides ZVZCS turn-off and ZCS turn-on condition for all the main switches and ZVZCS turn-on condition and ZCS turn-off condition for synchronous rectifier switch without using the anti-parallel diode and enables common ground and continuous output current. In this converter, the coupled-inductor and snubber circuits are not utilized so it leads to high efficiency and simplifies the converter topology. Finally, a 310V/24V/600W prototype is implemented to validate the theoretical analysis and benefits.
1 January 2026 in IEEE Transactions on Transportation Electrification
28 May 2026 in IEEE Open Journal of Power Electronics
This paper presents a novel and cost-effective multilevel inverter design for three-phase switched reluctance motor (SRM) drives. The proposed inverter employs a three-level topology with a shared-leg neutral point diode clamped (SLNPC) circuit, which utilizes two shared legs for adjacent phases. This innovative approach significantly reduces the size and cost of the drive by minimizing the number of required components, including power switches, diodes, gate drivers, and current sensors. Despite the reduction in components, the inverter delivers performance comparable to conventional three-level asymmetric NPC topology. Independent operating modes and common operating modes between adjacent phases are discussed in detail. The effectiveness of the three-level SLNPC topology is validated through comprehensive simulation studies and experimental results on a SRM drive system.