11 March 2014 in Optics Express
A high-efficiency optically pumped vertical-external-cavity surface-emitting laser emitting 20 W at a wavelength around 588 nm is demonstrated. The semiconductor gain chip emitted at a fundamental wavelength around 1170-1180 nm and the laser employed a V-shaped cavity. The yellow spectral range was achieved by intra-cavity frequency doubling using a LBO crystal. The laser could be tuned over a bandwidth of ~26 nm while exhibiting watt-level output powers. The maximum conversion efficiency from absorbed pump power to yellow output was 28% for continuous wave operation. The VECSEL’s output could be modulated to generate optical pulses with duration down to 570 ns by directly modulating the pump laser. The high-power pulse operation is a key feature for astrophysics and medical applications while at the same time enables higher slope efficiency than continuous wave operation owing to decreased heating.
23 April 2012 in Optics Letters
We report on a 2085 nm holmium-doped silica fiber laser passively mode-locked by semiconductor saturable absorber mirror and carbon nanotube absorber. The laser, pumped by a 1.16 μm semiconductor disk laser, produces 890 femtosecond pulses with the average power of 46 mW and the repetition rate of 15.7 MHz.
26 July 2021 in Optics Express
High-power and narrow-linewidth laser light is a vital tool for atomic physics, being used for example in laser cooling and trapping and precision spectroscopy. Here we produce Watt-level laser radiation at 457.75 nm and 460.86 nm of respective relevance for the cooling transitions of cadmium and strontium atoms. This is achieved via the frequency doubling of a kHz-linewidth vertical-external-cavity surface-emitting laser (VECSEL), which is based on a novel gain chip design enabling lasing at > 2 W in the 915-928 nm region. Following an additional doubling stage, spectroscopy of the 1S0 → 1P1 cadmium transition at 228.87 nm is performed on an atomic beam, with all the transitions from all eight natural isotopes observed in a single continuous sweep of more than 4 GHz in the deep ultraviolet. The absolute value of the transition frequency of 114Cd and the isotope shifts relative to this transition are determined, with values for some of these shifts provided for the first time.
4 February 2019 in Applied Physics Letters
Fundamental thermodynamic considerations reveal that efficient emission from an electrically injected light emitting diode (LED) can lead to the cooling of the device. This effect, known as electroluminescent (EL) cooling, has been identified decades ago, but it has not been experimentally demonstrated in semiconductors at practical operating conditions due to the extreme requirements set for the efficiency of the light emission. To probe the conditions of EL cooling in GaAs based light emitters, we have designed and fabricated LED structures with integrated photodiodes (PDs), where the optically mediated thermal energy transport between the LED and the PD can be easily monitored. This allows characterization of the fundamental properties of the LED and a path for eliminating selected issues encountered in conventional approaches for EL cooling, such as the challenging light extraction. Despite several remaining nonidealities, our setup demonstrates a very high directly measured quantum efficiency of 70%. To characterize the bulk part of the LED, we also employ a model for estimating the power conversion efficiency (PCE) of the LED, without the contribution of non-fundamental nonidealities such as photodetection losses. Our results suggest that the PCE of the LED peaks at around 105–115%, exceeding the 100% barrier required to reach the EL cooling regime by a clear margin. This implies that the LED component in our device is in fact cooling down by transporting thermal energy carried by the emitted photons to the PD. This provides a compelling incentive for further study to confirm the result and to find ways to extend it for practically useful EL cooling.
26 June 2013 in Optics Letters
A picosecond GaInP/AlGaInP/GaAs vertical external-cavity surface-emitting laser (VECSEL) at 675 nm is reported. The laser is mode-locked with a GaInP/AlGaInP/GaAs saturable absorber mirror and emitted pulses at a 973 MHz repetition rate and an average power of 45 mW. To our knowledge, this is the first demonstration of a passively mode-locked VECSEL emitting fundamental laser radiation at the visible part of the spectrum.
10 November 2017 in IEEE Photonics Technology Letters
The paper presents narrow-linewidth 780 nm edgeemitting semiconductor DFB lasers fabricated without regrowth using UV-nanoimprinted surface gratings. The thirdorder laterally-coupled ridge-waveguide surface gratings enable single mode operation, excellent spectral purity (40–55 dB side mode suppression ratio and 10 kHz linewidth) and good lightcurrent- voltage characteristics in continuous wave operation (~112 mA threshold current, ~1.55 V opening voltage and 28.9 mW output power from one facet at 300 mA current for 2.4 mm long devices), which are vital in various applications, such as rubidium spectroscopy and atomic clock pumping. The low fabrication costs, high throughput, structural flexibility and high device yield make the fabrication method fully compatible with large scale mass production, enabling the fabrication of low-cost miniaturized modules.