7 October 2019 in Nanoscale
Refractory plasmonic materials offer the benefits of thermal and chemical stability for photonic applications at high temperature or photon flux. Here we demonstrate strategies to fabricate tunable plasmonic hafnium nitride (HfN) nanoparticles.
14 June 2021 in Advanced Optical Materials
There is great interest in the development of alternatives to noble metals for plasmonic nanostructures. Transition metal nitrides are promising due to their robust refractory properties. However, the photophysics of these nanostructures, particularly the hot carrier dynamics and photothermal response on ultrafast timescales, are not well understood. This limits their implementation in applications such as photothermal catalysis or solar thermophotovoltaics. In this study, the light‐induced relaxation processes in water‐dispersed HfN nanoparticles are, for the first time, elucidated by fs transient absorption, Lumerical FDTD and COMSOL Multiphysics simulations, and temperature‐dependent ellipsometry. It is unequivocally demonstrated that HfN nanoparticles convert absorbed photons into heat within <100 fs; no signature of hot charge carriers is observed. Interestingly, under high photon energy or intense irradiation stimulated Raman scattering characteristic of oxynitride surface termination is observed. These findings suggest that transition metal nitrides could offer benefits over noble metals in the field of plasmonic photothermal catalysis.
1 October 2014 in Applied Surface Science
1 September 2012 in Journal of Applied Physics
B4C diffusion barrier layers are often introduced into Mo/Si multilayered films for enhancement of thermal stability. We observe that such multilayered films exhibit both period expansion and period compaction upon annealing at temperatures below 300 °C, depending on the annealing temperature and time. Using in-situ grazing incidence x-ray reflection measurements during sequential annealing, we resolved picometer periodicity changes in Mo/B4C/Si/B4C, Si/B4C, and Mo/B4C multilayer films, and show that the two opposite period-change effects are a result of interaction of Si with B4C layers, leading to expansion, and MoxSiy formation, leading to compaction. The study of Si/B and Si/C multilayer sub-systems suggests that the cause of expansion is the formation of relatively low density SixBy compounds at the Si-B4C interface. Although the Mo-B4C interface seems to be stable based on reflectometry data, other techniques such as depth profiling x-ray photoelectron spectroscopy and wide angle x-ray diffraction measurements show that Mo and B4C actually intermix.
27 November 2024 in Nuclear Fusion
Extrinsic impurity seeding is planned for ITER to avoid high heat fluxes to the tungsten divertor targets. Nevertheless, excessive sputtering by impurities would lead to a reduction in fusion power output and divertor lifetime. Unlike today’s fusion devices, the entrainment of impurities is expected to play an increasing role in ITER’s highly collisional near-surface plasma. Impurity entrainment refers to the acceleration of impurities with the plasma flow by collisional drag, leading to elevated impact energies. To investigate impurity entrainment under ITER-like divertor plasma conditions ( m−3, 5 eV), argon-seeded hydrogen plasmas were formed in the linear plasma generator Magnum-PSI. Doppler shifts in spatially-resolved emission profiles of argon (Ar II - 480.6 nm) and hydrogen (H - 486.1 nm) reveal the entrainment of seeded argon towards the upstream hydrogen velocity (∼9 cm from the surface), corresponding to ∼0.39 of the common-system sound speed. In addition, the sputtering yield of tungsten by argon bombardment for the argon-seeded hydrogen plasma was compared to a pure argon plasma by monitoring tungsten (W I - 400.9 nm) emission. These sputtering experiments reveal further entrainment of the argon impurities to ∼0.65 of the common-system sound speed at the sheath edge, leading to a large increase in their impact energy. Extrapolation of the Magnum-PSI results to ITER, using existing SOLPS-ITER simulations to determine the divertor plasma conditions, indicates more than an order of magnitude increase in gross erosion of the divertor targets due to impurity entrainment. However, the net erosion rate could still be kept under control if high re-deposition rates are achieved, which is treated in the companion paper (Cornelissen M.J.H. et al 2025 Nucl. Fusion 65 026008). The combination of a low sputtering threshold energy and high impact energy of impurities constrains the fine balance between radiative cooling with impurity seeding and avoiding extensive divertor erosion.
4 September 2023 in Advanced Materials Interfaces
Nickel‐based electrocatalysts are deemed as promising low‐cost, earth‐abundant materials in the development of the next‐generation alkaline and anion exchange membrane water electrolyzers. Herein, a plasma‐processing technique is presented for fabricating self‐supported nanostructures from planar NiFe substrates and its performance for water splitting reactions. Irradiating the samples with helium plasma results in the formation of nano‐tendrils, which are affixed to the metallic substrate. This unique design not only enhances charge and mass transport, but also increases the electrochemical surface area by 3 to4 times, as compared to the unmodified/planar surfaces. For the benchmark 10 mAcm−2geo current density, the nanostructured electrodes demonstrate overpotentials of 330 and 354 mV for oxygen evolution reaction and hydrogen evolution reaction respectively in 1 M‐ KOH. Moving forward, application of this technique can be extended for fabricating self‐supported 3D substrates (e.g., foams, felts, perforated sheets), all of which find practical applications in energy conversion and storage devices.