Mengmeng Lao

Mengmeng Lao

Auto-generated profile, based on publicly available information

Mengmeng Lao

Dutch Institute for Fundamental Energy Research

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 July 2024 in Advanced Science
Verified
Journal Article
Open access
RLRenée T. M. van Limpt
Renée T. M. van Limpt
MLMengmeng Lao
Mengmeng Lao
MTMihalis Tsampas
Mihalis Tsampas
MCMariadriana Creatore
Mariadriana Creatore
Nickel cobalt oxides (NCOs) are promising, non‐precious oxygen evolution reaction (OER) electrocatalysts. However, the stoichiometry‐dependent electrochemical behavior makes it crucial to understand the structure‐OER relationship. In this work, NCO thin film model systems are prepared using atomic layer deposition. In‐depth film characterization shows the phase transition from Ni‐rich rock‐salt films to Co‐rich spinel films. Electrochemical analysis in 1 m KOH reveals a synergistic effect between Co and Ni with optimal performance for the 30 at.% Co film after 500 CV cycles. Electrochemical activation correlates with film composition, specifically increasing activation is observed for more Ni‐rich films as its bulk transitions to the active (oxy)hydroxide phase. In parallel to this transition, the electrochemical surface area (ECSA) increases up to a factor 8. Using an original approach, the changes in ECSA are decoupled from intrinsic OER activity, leading to the conclusion that 70 at.% Co spinel phase NCO films are intrinsically the most active. The studies point to a chemical composition dependent OER mechanism: Co‐rich spinel films show instantly high activities, while the more sustainable Ni‐rich rock‐salt films require extended activation to increase the ECSA and OER performance. The results highlight the added value of working with model systems to disclose structure‐performance mechanisms.

1 March 2015 in Ceramics International
Verified
Journal Article
Closed access
MLMengmeng Lao
Mengmeng Lao
XLXiaoting Lin
Xiaoting Lin
Peng LiPeng Li
Peng Li
LSLianyi Shao
Lianyi Shao
Kaiqiang WuKaiqiang Wu
Kaiqiang Wu
JSJie Shu
Jie Shu

4 September 2023 in Advanced Materials Interfaces
Verified
Journal Article
Open access
ARAmeya Ranade
Ameya Ranade
MLMengmeng Lao
Mengmeng Lao
RTRemco H.M. Timmer
Remco H.M. Timmer
EZErwin Zoethout
Erwin Zoethout
HEHans J.N. van Eck
Hans J.N. van Eck
MTMihalis Tsampas
Mihalis Tsampas
Nickel‐based electrocatalysts are deemed as promising low‐cost, earth‐abundant materials in the development of the next‐generation alkaline and anion exchange membrane water electrolyzers. Herein, a plasma‐processing technique is presented for fabricating self‐supported nanostructures from planar NiFe substrates and its performance for water splitting reactions. Irradiating the samples with helium plasma results in the formation of nano‐tendrils, which are affixed to the metallic substrate. This unique design not only enhances charge and mass transport, but also increases the electrochemical surface area by 3 to4 times, as compared to the unmodified/planar surfaces. For the benchmark 10 mAcm−2geo current density, the nanostructured electrodes demonstrate overpotentials of 330 and 354 mV for oxygen evolution reaction and hydrogen evolution reaction respectively in 1 M‐ KOH. Moving forward, application of this technique can be extended for fabricating self‐supported 3D substrates (e.g., foams, felts, perforated sheets), all of which find practical applications in energy conversion and storage devices.

22 December 2023 in ECS Meeting Abstracts
Verified
Journal Article
Closed access
ARAmeya Ranade
Ameya Ranade
MLMengmeng Lao
Mengmeng Lao
RTRemco H.M. Timmer
Remco H.M. Timmer
HEHans J.N. van Eck
Hans J.N. van Eck
MTMihalis Tsampas
Mihalis Tsampas
Hydrogen is considered as a future energy carrier due to its desirable characteristics such as high energy density, wide range of applications, and near-zero greenhouse gas emissions. Amongst the various hydrogen production methods, electrochemical water splitting is a promising alternative for producing large-scale green hydrogen. Recently, Anion Exchange Membrane Water Electrolysis (AEMWE) has garnered special attention due to its advantages such as use of low-cost materials and higher performance over conventional techniques such as Alkaline Water Electrolysis (AWE) or Proton Exchange Membrane Water Electrolysis (PEMWE). In the development of anodic electrodes for AEMWE, nickel-based materials have been extensively studied as promising low-cost substitutes to expensive noble metal catalysts such as IrO2 and RuO2. To improve the catalytic performance, interfacial engineering, intercalation, nanostructuring techniques are commonly used1. The nanostructured catalysts are typically synthesized in powder form, which then requires a binder to coat them on a substrate. The extra interfaces between the catalyst, substrate and the electrolyte can cause charge and mass transfer limitations as well as restrict the availability of active sites2. Under gas evolution conditions, it can also lead to mechanical shedding and delamination of catalysts. This limits the applicability of emerging electrocatalysts on a commercial scale, thus making it essential to explore novel fabrication routes for synthesizing self-supported nanostructures. Helium plasma irradiation is a potential alternative wherein the nanostructures are created on the substrate itself, and thus can potentially alleviate some of the shortcomings of conventional methods. The plasma irradiation technique has been extensively studied in relation to the surface erosion and embrittlement of fusion reactors3,4. However, its application has been limited mostly to planar surfaces and only a few studies have employed this technique in solar-to-hydrogen production5,6. Herein, we report plasma-driven synthesis of nanostructured 3D electrodes and their integration in a membrane electrode assembly (MEA). The MEA with self-supported nanostructures delivers ≈25% higher performance than its bare counterpart at room temperature. Additionally, iron incorporation further increases the performance, surpassing commercially available NiFe electrocatalysts. Going forward, the durability and performance of the self-supported electrodes at higher temperatures will be explored and the applicability of this technique to other renewable energy systems is expected to be correlated. References: 1. Z. W. Seh et al., Science, 355 (2017). 2. J. E. Park et al., ACS Catal., 12, 135–145 (2022). 3. D. Dasgupta et al., Nucl. Fusion, 59, 086057 (2019). 4. S. Kajita, A. M. Ito, and K. Ibano, J. Appl. Phys., 132, 181101 (2022). 5. M. de Respinis et al., ACS Appl. Mater. Interfaces, 5, 7621–7625 (2013). 6. S. Feng et al., Appl. Surf. Sci., 580, 151979 (2022). Figure 1

22 December 2023 in ECS Meeting Abstracts
Verified
Journal Article
Closed access
RLRenee van Limpt
Renee van Limpt
MLMarek Lavorenti
Marek Lavorenti
MLMengmeng Lao
Mengmeng Lao
MVMarcel A. Verheijen
Marcel A. Verheijen
MTMihalis Tsampas
Mihalis Tsampas
MCMariadriana Creatore
Mariadriana Creatore
Anion exchange membrane water electrolysis is a potentially low-cost and sustainable technology for renewable-energy driven hydrogen production. Realisation of its full potential relies on the development of cost-effective, earth-abundant OER electrocatalysts alternatives to the state-of-the art noble metal oxides1. Ternary transition metal oxides, such as cobalt nickel oxides, are promising candidates due to their excellent alkali resistance in combination with remarkable catalytic activities. The latter relate to their tuneable oxidation states and variation in coordination of their metal centres. These correlations can be properly investigated when precise control over the layer chemical composition is attained. Atomic layer deposition (ALD) is widely acknowledged to deliver control over film uniformity, thickness and conformality, as well as film chemical composition due to the self-limiting nature of its surface reactions. In this study, an ALD supercycle process based on cobalt cyclopentadienyl (CoCp2) and nickel methylcyclopentadienyl (Ni(MeCp)2) precursors and an oxygen plasma co-reactant has been developed2 to investigate the influence of chemical composition and crystallographic properties of cobalt nickel oxide thin films on their electrocatalytic OER performance. Deposition of ~20 nm binary nickel oxide and cobalt oxide results in the growth of polycrystalline films of the rock-salt and spinel phase, respectively. Ternary cobalt nickel oxide films with various ratios can be deposited uniformly, as indicated by energy dispersive x-ray spectroscopy mapping. The mixed oxides display a transition from the +2 oxidation state-based pure rock-salt phase (75% at.% Co) upon increasing Co at.% as verified by electron diffraction (figure a) and x-ray photoelectron spectroscopy (XPS). XPS furthermore reveals a linear increase in the Ni3+-to-Ni2+ ratio with increasing Co at.%, which indicates that an inverse spinel structure is formed. The formation of a Ni3+-rich inverse spinel cobalt nickel oxide between 55 and 75 at.% Co facilitates the formation of a semi-metallic state (102 S/cm) as opposed to the poorly conductive binary oxides (10-3 S/cm and 10-2 S/cm for NiO and Co3O4, respectively). Cyclic voltammetry (CV) measurements in 1M KOH, reveal chemical composition dependent activation behaviour (figure b). Continuous activation behaviour is observed for rock-salt phase films, whilst increment of the Co at.% results in reduced film activation until virtually no activation of the spinel phase films is observed. The activation of the nickel-rich film is accompanied by irreversible redox changes from the +2 to +3 oxidation state as indicated by the integrated non-catalytic wave. Post CV XPS analysis confirms the transition from Co2+ and Ni2+ oxidation states to Co3+ and Ni3+. The formation of an (oxy)hydroxide state is observed for the rock-salt dominated films, whilst oxidation states characteristic of a spinel- like oxide structure are observed for the cobalt-rich films. No changes in the transition metal ratios are observed after activation. Scanning electron microscopy images furthermore reveal that the transformation of the Ni-rich films is accompanied by surface restructuring. These results indicate that initial composition can significantly influence the electrocatalytic performance of ternary oxides and therefore highlight the importance of techniques such as atomic layer deposition to study their complex behaviour. 1Xu et al., Energy Chem., 4 (2022) 100087 2van Limpt et al., J. Vac. Sci. Technol. A, 41 (2023) 032407 This work has been carried out within the SCALE project (NWA.1237.18.001) funded jointly by the Netherlands Organization for Scientific Research. Authors would like to thank the co-founders of the project ISPT, Syngaschem, VecoPrecision and Vsparticle and international partners Toyota Motor Europe and FORTH institute. Figure: (a) ALD deposited cobalt nickel oxide film show a transition from the +2 oxidation state-based rock-salt phase (NiO) to the spinel structure consisting of mixed +2/+3 oxidation states (Co3O4) upon tuning the chemical composition as identified by electron diffraction. (b) This significantly affects the OER-electrocatalytic performance and activation of the films as represented by the current density at 1.8V vs RHE over 500 CV cycles in 1M KOH. Data labels indicate cobalt concentration as at.% Co/(at.% Co+ at.% Ni). Figure 1

22 November 2024 in ECS Meeting Abstracts
Verified
Journal Article
Closed access
RLRenee van Limpt
Renee van Limpt
MLMengmeng Lao
Mengmeng Lao
MTMihalis Tsampas
Mihalis Tsampas
MCMariadriana Creatore
Mariadriana Creatore
The development of a sustainable energy system relies on the production of green hydrogen. One of the major challenges for water splitting is the synthesis of platinum group metal-free oxygen evolution reaction (OER) electrocatalysts. Spinel nickel cobalt oxides (NCOs) have attracted particular interest due to their stable electrocatalytic performance. The less researched rock-salt NCOs, however, are also promising due to their ability to convert to the OER-active hydroxide phase1. Further development of NCO electrocatalysts requires fundamental understanding of their crystallographic structure-OER performance relationship. This work addresses ~20 nm atomic layer deposited (ALD) NCO thin film systems with a broad composition range to unravel the above-mentioned relationship. Our previously developed ALD supercycle process2 based on Ni(MeCp)2, CoCp2 and O2 plasma is employed to generate a full range of chemical compositions, such that the phase transition from Ni-rich rock-salt films to Co-rich films at ~55 at.% Co can be observed. Extensive material characterisation reveals that the phase transition is accompanied by an increase in the +3/+2 ratio of the oxidation state of both Ni and Co. Electrochemical analysis in 1M KOH shows an optimal performance for the 30 at.% Co rock-salt film after 500 CV cycles and a synergistic effect between cobalt and nickel such that NCO films are more OER active than Co3O4 and NiO. The films show a composition-dependent activation during CV cycling, where a decrease in activation is observed for increasing Co at.%. No activation is observed for the spinel films. The activation is driven by bulk transformation to the active (oxy)hydroxide phase and is accompanied by an increase in electrochemical surface area (ECSA) up to a factor 8 for rock-salt films. The overpotential after cycling is corrected for the increase in ECSA using an original method, which reveals that Ni-rich spinel structure films are intrinsically more active3. The use of model systems in combination with extensive material characterisation and prolonged electrochemical testing allows us to distinguish two classes of NCO catalysts, the instantly active and highly stable Co-rich spinel films and the high surface area Ni-rich rock-salt phase which develops upon extensive activation . Placing these results in perspective, we conclude that application of these catalysts on high surface area 3D electrodes would benefit from the more intrinsically active spinel NCO films, whilst activated rock-salt films would be the preferred choice for thin film electrocatalysis studies. These results also show that rock-salt NCO films (<40 at.% Co) could be a more sustainable alternative to the more commonly used spinel NCO films. 1Gebreslase et al. J. Energy Chem. 2022, 67, 101-137 2van Limpt et al. JVSTA, 2023, 41, 032407 3van Limpt et al. Adv. Energy Mat. under review Figure 1