17 March 2025 in Metal Working and Material Science
Introduction. The primary goal of food processing equipment manufacturing is to create highly efficient process equipment that can increase labor productivity while reducing energy costs. Improving existing and creating new high-performance equipment for food production is one of the main trends in the development of modern mechanical engineering. The term “homogenization” literally means “increasing uniformity”. In the context of emulsions, homogenization refers to the process of treating emulsions, which leads to the fragmentation of the dispersed phase. Homogenization is the process of grinding liquid or mashed foods by passing it at high speed and pressure through narrow annular slots. The authors propose to use cam-type mechanisms for homogenization. Cam-type mechanisms allow for a more efficient allocation of the time for the product suction and injection. The homogenization process benefits from the potential to reduce the speed during product injection. The purpose of the work is to reduce power consumption during homogenization. The research methods are based on the theory of machines and mechanisms. These methods enabled developing a methodology for synthesizing the homogenizer drive mechanism and designing a machine that ensures its operation in accordance with the proposed cycle diagram. Results and discussion. The synthesis of mechanisms is executed with consideration for the workload, which was calculated for existing domestic machines in the production of processed cheese. Thus, with a given production capacity of 550 l/h and a plunger diameter of 28 mm, the technological force is F = 12315 N. In accordance with the authors' proposals, the design of the homogenizer is modified by introducing cam mechanisms. In the design of this drive, a novel cycle diagram is proposed, enabling an increase in product injection time and a reduction in suction time. According to the novel cycle diagram, 280° is proposed for product injection and 80° for suction. In this case, the power on the drive shaft is equal to P = 2.5 kW instead of 3.5 kW for the existing design, driven by a crank mechanism. The power consumption is decreased by 26 %.
13 June 2023 in Metal Working and Material Science
16 March 2026 in Metal Working and Material Science
Introduction. In the context of the increasing demand in the modern machine-tool industry for the development of hybrid machine-tool equipment integrating mechanical and surface-thermal operations, the study of combined technologies for the formation of wear-resistant coatings becomes highly relevant. The integration of fundamentally different processing methods – mechanical shaping and high-energy surface-thermal modification – on a single machine platform represents a promising direction for improving the efficiency and quality of manufacturing processes. Plasma spraying supplemented by high-energy heating with high-frequency currents (HFC) or the formation of composite ceramic–metal coatings from mechanical mixtures creates the prerequisites for designing multifunctional hybrid systems that meet the requirements of Industry 4.0. However, the comparative effectiveness of various combined coating treatment options under tribological loading has not been sufficiently studied to date. The purpose of the present work is to conduct a systematic comparative study of the wear resistance of plasma coatings formed under different conditions of combined spraying technology under dry sliding friction , and to formulate recommendations for the design of advanced hybrid machine-tool equipment. Methods. Plasma coatings sprayed from PG-12N-01, PG-S27, and PGN-V3K powders were investigated, as well as coatings subjected to additional high-energy induction remelting and coatings from mechanical mixtures of metal powder and aluminum oxide (Al₂O₃). Spraying was performed with a PUN-3 plasma torch at optimized conditions. High-energy heating was carried out using a VChG 6-60/0.44 generator at a frequency of 440 kHz. Wear resistance tests were conducted under continuous dry sliding friction against a VK8 cemented carbide indenter at a load of 20 N. The wear criterion was the volume loss of the coating material, determined by measuring the wear scar width with a UIM-21 toolmaker's microscope. The coating microstructure was studied by optical metallography. Results and discussion. It was established that remelted nickel coatings of the PG-12N-01 grade exhibit wear resistance exceeding that of the initial non-remelted coating by 35%. At the same time, remelting of PG-S27 high-chromium cast iron coatings led to a 20 % decrease in wear resistance due to the formation of an unfavorable dendritic structure. Coatings based on ceramic–metal mechanical mixtures showed the best results: the nickel–ceramic mixture PG-12N-01 (20 %) + 15A (80 %) exceeded the baseline value by 44 %, while the cobalt–ceramic mixture PGN-V3K (20 %) + 15A (80 %) provided a 30 % increase in wear resistance compared to the initial cobalt alloy coating, with wear practically ceasing after the run-in period. The structure of ceramic–metal coatings is characterized by a uniform distribution of fine oxide ceramic particles in a metallic matrix, which ensures high tribological performance of the composite. The research results form an experimental basis for the design of next-generation hybrid machine-tool equipment integrating mechanical processing and surface-thermal technological operations.