Polyurethane cement composite is a new organic–inorganic composite material with high strength, corrosion resistance, and fast curing. It is a complement and alternative to traditional cement materials. The flexural properties of polyurethane cement composites are the basic mechanical index of the material. In order to study the flexural properties under different temperature loads, a molecular model was established, the chemical reaction process of polyurethane cement and the temperature response mechanism was analyzed, and the preparation process of polyurethane cement was proposed. Then, bending tests were carried out in strain-controlled mode to obtain the specimens’ bending strength and stiffness modulus under different temperature loads. The test results showed that the tensile strength of polyurethane cement decreased first, then increased, and finally decreased with the increase in temperature, while the bending stiffness modulus decreased with the increase in temperature. Combined with the theoretical derivation, the damage mode of the samples under different temperature loads was analyzed, and the “L-type” damage strain curve was obtained. The results showed that the proposed theory could effectively explain the mechanism of action and flexural properties of polyurethane cement composites under temperature loading, which is a significant improvement to the application of polyurethane cement composites in practical engineering.
Cable-stayed bridges have been widely used in large-span bridge engineering because of their large span capacity and novel structure. The frequent traffic of vehicles transporting flammable and explosive materials has increased the incidence of bridge fires. After being burned, the cable-stayed bridge will suffer from varying degrees of damage, which affects its performance. Therefore, mechanical analysis and evaluation of the fire-damaged cable-stayed bridge are necessary. Due to the development of technology, the structural analysis of cable-stayed bridges has gradually shifted from experimental methods to numerical simulation or artificial intelligence methods, and from local performance research to holistic research. In this paper, a fire accident in the Sifangtai Bridge in Harbin, China, is taken as a case study. Finite element software and damage theory calculation methods were used, and the static and dynamic performances of the bridge under the condition of cable fire damage were analyzed. The results show that the variation of cable force during the movement of vehicle load along the bridge is relatively small, within the range of 7% to 12%. The fusing of the upper cables of the bridge tower has the greatest impact on the deflection of the beam, while the fusing of lower cables has the same impact on the deflection of the entire bridge as the undamaged state. Near the fused cables, cable forces change significantly, increasing by over 20%. As the degree of damage increases, the increase in deflection of the beam becomes more pronounced. The impact of different degrees of cable damage on the dynamic performance of cable-stayed bridges is reflected in quantitative changes. As the degree of cable damage and the amount of fusing increase, the change in structural frequency becomes more pronounced. This paper not only provides technical support and a theoretical basis for the performance analysis of cable-stayed bridges damaged by fire, but it also improves the research content of combining static and dynamic performance, which provides important reference values for similar research in the future.
Many bridges suffer from aging and deterioration problems and need to be strengthened. PSWR-PUC is an emerging structural strengthening technology that enhances the load-bearing capacity of concrete bridges by embedding prestressed steel wire ropes into polyurethane cement. This paper focuses on investigating the shear reinforcement effectiveness of PSWR-PUC. Firstly, the composition of PSWR-PUC is introduced. Subsequently, two T-beam bridges in similar service condition are selected, and shear strengthening schemes involving PSWR-PUC and externally bonded steel plates are devised. Lastly, static loading tests are conducted, and the deflection and strain data of the two bridges before and after reinforcement intervention are analyzed. The results indicate that both strengthening methods improve the bridge load-carrying capacity. However, compared to the bridge strengthened with the externally bonded steel plate method, the deflections in the bridge strengthened with PSWR-PUC decreased by 36.8% and 42.1%, the strains decreased by 18% and 23%, and the shear stiffness was improved to a greater extent. These results verified that the PSWR-PUC strengthening method is effective for improving structural capacity and performance. This study will contribute to an in-depth understanding of the performance characteristics and application scope of PSWR-PUC shear strengthening technology, and it provides a scientific basis and guidance for practical engineering applications.
10 October 2023 in Structure and Infrastructure Engineering
Stone arch bridge is an important type in the early bridge construction process because of its beautiful shape, material saving and economic rationality. However, stone material will deteriorate after long-term operation, which results in a decrease in strength and bearing capacity of stone arch bridge. The vehicle load is increasing at the same time. Therefore, accurate evaluation of bearing capacity of stone arch bridge is essential to ensure safety. In this article, a three-span open-spandrel stone arch bridge was taken as research object. Firstly, the bridge damages were investigated and analyzed in detail, and bridge service state was evaluated. Then, based on the evaluation results of disease damages and considering stone material deterioration, a refined finite element model of stone arch bridge was established to analyze bending moment, axial force, strain and deformation. Finally, static load test was carried out to test vertical deformation and stress of arch ring, horizontal displacement of pier, settlement of foundation and development of cracks. The results show that static load test is the most accurate method for evaluating bearing capacity of stone arch bridge. The evaluation accuracy of finite element model based on material correction is in the middle, and the evaluation accuracy of disease damage assessment is the worst. In practical work, bearing capacity of stone arch bridge can be evaluated by combining the three methods with high accuracy and comprehensive results.