1 April 2024 in Physics of Fluids
This study investigates the aerodynamic behavior of a high-performance vehicle and the interaction with its rear wing in straight-line and steady-state cornering conditions. Analyses are performed with Reynolds-averaged Navier–Stokes based computational fluid dynamics simulations using a moving reference frame and overset mesh technique, validated against moving ground wind tunnel experiments. The results indicate a significant 20% decrease in downforce and 35% increase in drag compared to straight-line conditions at the smallest considered corner radius of 2.9 car-lengths. Downforce losses primarily stem from performance deficits on the underbody and rear wing, alongside elevated upper body lift. Drag penalties mainly result from additional pressure drag induced by a recirculation wake vortex generated behind the vehicle's inboard side. The vehicle's lateral pressure distribution is also affected, introducing a centripetal force that increases with smaller corner radii. Additionally, analyses of the rear wing reveal alternations of its aerodynamic characteristics in cornering, particularly impacting vortical flow and suction on the lower surface. Throughout the operating conditions, the rear wing's individual downforce contribution falls off beyond its stall angle. At higher angles of attack, the rear wing primarily generates downforce by pressurizing the vehicle's upper surfaces, but its interaction with the near-wake leads to a substantially increased pressure drag. Overall, these findings provide crucial insights into the intricate aerodynamic interactions of high-performance vehicles in diverse operating conditions as well as form an essential foundation for future research on static and active aerodynamic designs in the pursuit to optimize vehicle performance in dynamic driving conditions.
14 May 2025 in Vehicle System Dynamics
1 April 2024 in Physics of Fluids
This study investigates the impact of yaw conditions on the aerodynamic performance and flow field of three high-performance vehicle model configurations by means of wind tunnel testing and unsteady Reynolds-Averaged Navier–Stokes-based computational fluid dynamics simulations. While yaw effects on automotive vehicles have been explored, the effects on far more complex flow fields of high-performance vehicles remain insufficiently researched. This paper reveals that yaw conditions have a significant negative influence both downforce and drag performance. Spoiler and rear wing devices enhance downforce but increase the vehicle's sensitivity to yaw. Furthermore, yaw conditions significantly alter vortex structures and local flow velocities, affecting downstream flow behavior. Surface pressure measurements on the slant confirm these findings and highlight notable yaw effects and upstream effects from spoiler and rear wing devices. Wake analyses through total pressure measurements show that yaw induces a substantial deviation from straight-line wake characteristics, which become dominated by an inboard rotating vehicle body vortex. Overall, this research enhances the understanding of the effects of yaw conditions on high-performance vehicle aerodynamics and provides valuable data for future vehicle aerodynamics research in real-world operating conditions.
1 August 2024 in Physics of Fluids
This study presents a comprehensive investigation into the impact of active aerodynamic load balancing (AALB) on the cornering performance of high-performance vehicles. The research explores the use of active asymmetric aerodynamic devices, specifically split and tilted rear wing concepts, capable of manipulating vertical wheel loads and counteracting effects of lateral load transfer during cornering. The performance potential of AALB is assessed through quasi-steady static coupling of aerodynamic data with a detailed vehicle dynamics model. The findings show that inside bias operating states of the split rear wing and tilted rear wing concepts, which favor loads on the inside tires, can improve cornering velocities up to 0.5% and 2% compared to high symmetric operating states, respectively. Noteworthy, through effective distribution of aerodynamic loads, the inside bias operating states produce less downforce and drag, thereby reducing the propulsion power required to overcome drag by 15%–20%, depending on the cornering condition. The tilted rear wing concept demonstrates the highest AALB capability and most consistent response to its control strategy, accredited to its ability to generate vertical and horizontal aerodynamic force components. It can, therefore, achieve over 1% higher maximum cornering velocities compared to the split rear wing, while also offering efficiency benefits. Overall, the research highlights the effectiveness of AALB in improving cornering performance and efficiency, offering valuable insights for the development of advanced active aerodynamic solutions in automotive design and paving the way for future advancements in the field.