8 September 2019 in The Russian Automobile and Highway Industry Journal
Introduction. The paper describes methods of using the additional left-turn phase of regulation. The authors view the main foreign and domestic methods used in the specialization of the left turn in a separate phase of regulation. To propose a new approach to the specialization of the left-turn direction in a separate phase of regulation the authors investigate one of the most loaded intersections in Voronezh and determine the main characteristics of the traffic flow. Therefore, the authors suggest new parameters in choosing of the necessary method of traffic organization at controlled intersections.Methods and materials. The paper analyses the main methods, which were conditionally related to two approaches: the accident rate of the site and the characteristics of the traffic flow (speed and intensity of the left-turn flow). The authors explained that the new approach, which took into account such parameters as speed, vehicle delays and queue length, allowed effectively controlling the intersection due to the optimal choice of the necessary traffic organization method and due to the result of changes in the parameters by combining the intensity of the left-turn flow and forward flow.Results. The authors developed the approach to the additional left-turn section introduction at the controlled intersection based on a comparison of the left-turn intensity and forward flow and on the analysis of changes in the main characteristics of the traffic flow (speed, vehicle delays and queue length).Discussion and conclusions. The authors concluded that it is necessary to use the proposed approach at the stage of modeling, design and reorganization of the regulated area on the basis of changes in the main characteristics of the traffic flow.
1 January 2025 in The Russian Automobile and Highway Industry Journal
Introduction. Within the framework of the transformation of the passenger transportation industry of the Russian Federation, the relevance of assessing the current state of the public transport service system in the subjects of the Russian Federation is determined on the basis of the parameters laid down in current and prospective regulatory legal acts.Materials and Methods. The research uses current regulatory legal acts of the federal and regional levels in the field of public transport services, data from the administrative-territorial division of the subject of the Russian Federation, current registers of inter-municipal and municipal routes, up-to-date statistical information on the population. The following research methods were used: analysis, survey, formalization.Results. The research presents a methodology developed by the authors for rapid assessment of the current state of the public transport service system in the subject of the Russian Federation, including an algorithm for its application. The methodology is based on the assessment of six criteria, which are aggregated indicators of the parameters of public transport services in the areas of accessibility, safety, reliability and comfort. The results of the testing of the technique in the Omsk region are presented.Discussion and conclusions. The results obtained allow us to identify problem areas for which it is necessary to develop and implement measures to improve the quality of public transport services in the short term. The proposed methodology is not a substitute for the methods approved by the current regulatory legal acts, and can be used at the initial stage of development and updating of transport planning documents of the subject of the Russian Federation.
17 March 2022 in The Russian Automobile and Highway Industry Journal
Introduction. The emphasis is placed on modern requirements in the development of transport industry by improving the planning of the activities of road transport enterprises in terms of indicators that determine the productivity of workers and rolling stock, which are a function of the demand for transportation. The results of the activities of road transport enterprises depend on the labour productivity of each employee performing a specific function for the implementation of a specific contract and making a profit.Materials and methods. Planning is carried out using the conceptual provisions of the current planning of the work of a trucking company, taking into account the relationship of activities and the demand for transportation, methods of probability theory and mathematical statistics, scientific principles of education and training of workers for the transport industry.Results. The application of a new approach to planning is to combine the productivity of workers and the production of rolling stock of the Motor Transport Enterprises (MTE). This made it possible to develop a mathematical model and methodology, which takes into account that the productivity of workers must ensure the receipt of the planned income for each contract and its value will be planned within the confidence limits. When planning, probabilistic events are taken into account that occur during the development of sectors of the economy of the Russian Federation and affect the need for skilled staff. Mathematical modeling is carried out in relation to the real operating conditions of cargo transportation and specific functions of employees. The number of rolling stock and the required number of employees are determined by the development of rolling stock, by the development of a specific production function by an employee in modern conditions of contractual relations.Discussion and conclusions. The results of the study are intended for the practice of road transport enterprises at the stage of determining indicators of labor productivity of workers and rolling stock.
6 January 2023 in The Russian Automobile and Highway Industry Journal
Introduction.Nowadays the part of the diesel engines for KamAZ-740 cars are operated with fuel equipment, in which the injectors have hydro mechanical control. Their main disadvantage is the low fuel pressure in front of the injector openings (less than 60 MPa) and the lack of fuel supply control.The use of injectors with electro hydraulic control (EHC) increases the pressure in the injector cavity up to 250 MPa and control the fuel injection process. The disadvantage of the injectors with EHC is a structural complexity of a control valve, the difficulty of its regulation and coding. The object of the study is the injectors of KamAZ-740 diesel engine with electro hydraulic control of the atomizer needle stroke.The purpose of this work is to carry out theoretical research and improve the methods of maintenance of injectors with electro hydraulic control (control valve regulation and coding), which will increase their reliability, durability and ensure a reduction in diesel fuel consumption.Research methods.The study of the nozzle control valve is theoretical and calculated. The paper proposes a calculation method and performs theoretical studies for the influence of pressure (50 – 250 MPa) on the value of the effective flow section and the diameter of the nozzle holes of the sprayer.For the injectors with EHC, the control valve regulation procedure has been clarified, which consists in the fact that at the beginning of regulation, the main force acting on the ball from the side of the maximum pressure in the control chamber (for example, 200 MPa) equal to 76 N is calculated (see Figure 4). Then the required spring force of 100 N is determined (20-40% more, see Figure 5). Next, the strength of the electromagnet is estimated at 140 N (20 – 40% more of the spring force, see Figure 6).The results of theoretical research.The results of computational (theoretical) studies for the effective flow section of the sprayer and the diameter of the nozzle holes, depending on the pressure P in front of the nozzle holes, are presented.The paper defines.1. The forces acting on the ball (57 – 105 N) depending on the pressure in the control chamber (150 – 275 MPa). 2. Spring forces (40 – 140 N) with a stiffness of 40 N /mm, depending on its compression up to 3.5 mm. 3. The forces of the electromagnet (140 – 20 N) depending on the gap between the anchor and the core (0.2 – 0.5 mm).The method of restoring the required (rated) cyclic fuel supply when it changes as a result of replacing the control valve or adjusting is considered. The calculated values of fuel supply per cycle (mm3/cycle) from the activation time are given.Conclusion.The results of the study are intended for organizations and enterprises engaged in diagnostics, restoration, adjustment and coding of injectors with electro hydraulic control for the needle stroke of sprayers. The results of computational studies can be used to refine the methodology of maintenance of fuel systems with electronic control (Common Rail).
1 January 2022 in Omsk Scientific Bulletin
SUSiberian State Automobile and Road University
Siberian State Automobile and Road University
The purpose of the article is to select the cam profile (with equal design parameters) for driving the plunger of a high-pressure pump that provides the maximum speed and permissible acceleration of the pusher. A method of selecting a cam profile by analyzing combined graphs of changes in the path, speed, and acceleration of a cam pusher of various profiles using the Mathcad program is proposed. Calculations have been performed and combined graphs of changes in the path, speed, and acceleration of the cam pusher with tangential, convex, and concave profiles have been constructed. A comparative analysis of the combined graphs showed that the maximum speed of the cam pusher with a concave profile is 1,5 times greater than for cams with a tangential or convex profile. A cam with a concave profile is recommended for driving pump plungers of low-speed marine diesel engines (up to 250 min–1). To create ultra–high pressures (more than 120 MPa), the fuel supply system must be batterytype with a drive of small diameter plungers (4–6 mm) from an eccentric shaft with a special-shaped washer and electronically controlled injectors.
28 June 2018 in Novosibirsk State Pedagogical University Bulletin