Triethylaluminum Al(C2H5)3, TEA, and triethylborane, B(C2H5)3, TEB, are transparent, colorless, pyrophoric liquids with boiling points of approximately 190 °C and 95 °C, respectively. Upon contact with ambient air, TEA, TEB, as well as their mixtures and solutions, in hydrocarbon solvents, ignite. They can also violently react with water. TEA and TEB can be used as hypergolic rocket propellants and incendiary compositions. In this manuscript, a novel scheme of the heterogeneous interaction of gaseous oxygen with liquid TEA/TEB microdroplets accompanied by the release of light hydrocarbon radicals into the gas phase is used for calculating the self-ignition of a spatially homogeneous mixture of fuel microdroplets in ambient air at normal pressure and temperature (NPT) conditions. In the primary initiation step, TEA and TEB react with oxygen, producing an ethyl radical, which can initiate an autoxidation chain. The ignition delay is shown to decrease with the decrease in the droplet size. Preliminary experiments on the self-ignition of pulsed and continuous TEA–TEB sprays in ambient air at NPT conditions are used for estimating the Arrhenius parameters of the rate-limiting reaction. Experiments confirm that the self-ignition delay of TEA–TEB sprays decreases with the injection pressure and provide the data for estimating the activation energy of the rate-limiting reaction, which appears to be close to 2 kcal/mol.
1 October 2023 in Russian Journal of Applied Chemistry
The results of studies on determination of the ignition delay time of hypergolic low-toxicity (“green”) propellants with high-test hydrogen peroxide as an oxidizer are discussed. The use of liquid and solid fuels containing compounds that catalyze the hydrogen peroxide decomposition (manganese and copper salts) or actively react with hydrogen peroxide (e.g., NaBH4) allows preparation of propellants with the ignition delay time shorter than 20 ms, which allows using these propellants in liquid or hybrid rocket engines. The use of ionic liquids as a fuel in most cases also requires introducing promoters.