23 December 2022 in International Journal of Rock Mechanics and Mining Sciences
6 December 2022 in Soils and Rocks
Soft ground improvement techniques have evolved substantially in Brazil in recent years. However, their application in soft and very soft clays requires a good understanding of the fundamentals of ground improvement techniques suited to the problem as well as the actual field behavior when implemented on a real scale. This paper describes some of the most widely used ground improvement techniques in the context of very soft clays in Brazil. The techniques described in the paper use prefabricated vertical drains (PVD) such as vacuum preloading; or combine PVD and rigid inclusion, such as CPR grouting; or are purely column-like elements such as piled embankments (including those executed with the deep mixing technique, DSM); or combine column-like elements with the drainage function, such as stone columns and geosynthetic encased columns; or use cementitious binders such as shallow soil mixing. The paper reference condition is a soft clay foundation in which no strengthening is implemented, such as, an embankment with basal reinforcement or soft clay with vertical prefabricated drains, or the use of vacuum preloading to speed up the consolidation rate. The applications of the ground improvement techniques are illustrated by case histories, numerical analyses, or physical models. Different types of measurements are used to evaluate the performance of each technique, including settlements, horizontal displacements, excess pore pressures, embankment applied stresses, stress concentration factors, and clay strength following the ground treatment. The settlement improvement factor β, the ratio between the settlements for untreated and treated conditions, is shown to be a suitable parameter to assess the degree of improvement imposed in the soft foundation by ranking the various methods in increased order of strengthening effect.
1 October 2018 in The Leading Edge
Road construction and maintenance are major parts of geotechnical engineering that deal with the stiffness of natural or manmade ground materials. At the earliest stage of new road construction, the ground along the planned route often needs to be characterized in terms of the overall stiffness of the overburden-bedrock system. During construction, multiple stages of compaction and grading of geotechnical materials occur, with each requiring stringent quality control processes to ensure necessary stiffness levels are achieved. After construction, it is often necessary to periodically monitor stiffness conditions underneath an existing road for development of underground subsidence, especially if the road was built over subsidence-prone areas. Traditional approaches to stiffness evaluation — for example, cone penetration tests and standard penetration tests — provide local results that are highly dependent on test location. A seismic method, on the other hand, can provide a macroscale evaluation of a given material's elastic properties. The multichannel analysis of surface waves (MASW) method provides information on shear-wave velocity, which is the most scientifically accurate indicator of material stiffness from an elasticity perspective. Because of the strong nature of surface waves, the MASW field survey becomes a highly tolerant operation and is almost always guaranteed to be effective, rendering the approach highly convenient and reliable. Subsequent data analysis procedures are straightforward and do not require the application of signal-enhancing techniques. Because subsurface velocity models can differ by type of application, corresponding dispersion patterns must be noted during the analysis. Case studies executed during the beginning and ending stages of road construction and during the maintenance stage of a built highway are presented.
13 December 2024 in International Journal for Numerical and Analytical Methods in Geomechanics
BDBruno Guimarães Delgado
AGAlessandra dos Santos Gomes
Alessandra dos Santos Gomes
+2
1 February 2020 in Proceedings of the Institution of Civil Engineers - Waste and Resource Management
Non-invasive and non-destructive geophysical methods, such as the multichannel analysis of surface waves (MASW), can effectively provide useful information about the mechanical properties (stiffness and unit weight) of municipal solid waste (MSW), during and after landfill operation, for environmental monitoring and engineering analysis. This paper aims to address the results of a seismic survey performed at a sanitary landfill located 40 km north of Rio de Janeiro, Brazil, to image shear-wave velocity profiles to a depth of about 20 m. Seismic data were collected using the MASW method, performing an active and passive combined survey. Shear-wave velocities were used to compute the in situ unit weight distribution of MSW according to the empirical model proposed by Zekkos et al. Results indicated a two-layer model in which the bottom high-velocity layer is stiffer and denser than the top low-velocity layer. Despite the fact that the unit weight appeared to be underestimated for the upper low-velocity layer, model predictions may be graded qualitatively as excellent and potentially more accurate with well-calibrated parameters.