Achieving high power conversion efficiency and good mechanical robustness is still challenging for the ultraflexible organic solar cells. Interlayers simultaneously having good mechanical robustness and good chemical compatibility with the active layer are highly desirable. In this work, we present an interlayer of Zn2+-chelated polyethylenimine (denoted as PEI-Zn), which can endure a maximum bending strain over twice as high as that of ZnO and is chemically compatible with the recently emerging efficient nonfullerene active layers. On 1.3 μm polyethylene naphthalate substrates, ultraflexible nonfullerene solar cells with the PEI-Zn interlayer display a power conversion efficiency of 12.3% on PEDOT:PSS electrodes and 15.0% on AgNWs electrodes. Furthermore, the ultraflexible cells show nearly unchanged power conversion efficiency during 100 continuous compression-flat deformation cycles with a compression ratio of 45%. At the end, the ultraflexible cell is demonstrated to be attached onto the finger joint and displays reversible current output during the finger bending-spreading.
Visualising near-infrared (NIR) radiation at ultra-low power promises advanced, remote metrology for human physiology, farming, forest, and peripheral infrastructure. While NIR-to-visible upconversion enables reliable NIR imaging, material-based approaches suffer from modest efficiencies, high excitation intensities, non-linear response, and/or limited bio-compatibility. We overcome those hurdles by introducing a self-driven, circuit-based upconverter architecture. The monolithic thin-film stack comprises serially connected, organic NIR photodetectors, providing sufficient photovoltage to drive an organic light-emitting diode. We combine state-of-the-art, vacuum-processable absorbing and emitting systems with careful, simulation-assisted stack engineering. Converting photons from NIR (≤ 835 nm) to green (530 nm), we achieve an external upconversion efficiency (EUE) as high as 1.9%. Remarkably, the device turns on an ultra-low NIR intensity of 9 µW/cm², which is 4000 times lower than for any previous bias-free upconverter film with a comparable EUE. We outperform a commercial NIR detection card and demonstrate high-quality, linear NIR vision, providing a solid foundation for future low-cost use cases.