21 November 2022 in Applied Physics Letters
The thin film bulk acoustic resonator (FBAR) has emerged as a promising choice for liquid sensors because of its high frequency and sensitivity. To investigate the potential of FBAR devices working as the liquid sensors, we study the operating law of FBAR in liquid environments and explore the different loading effects of liquid on the shear mode and longitudinal mode. By analyzing the device and liquid interactions, we modify the Mason model of FBAR in the liquid environment. Subsequently, the influence of the piezoelectric film with different tilt angles and liquids on the characteristics of FBAR is discussed. We also prepared Sc0.2Al0.8N film-based FBAR to confirm the influence of different liquid environments on the resonant performances. The results show that the frequency drift of FBAR in the shear mode is related to density and viscosity of liquid, and the frequency drift of FBAR in the longitudinal mode is related to bulk modulus and density of liquid. The resonant frequency of FBAR in the shear mode is more sensitive with glycerol solution than that of FBAR in the longitudinal mode. This work can provide a research basis for the application of FBAR liquid sensors.
1 September 2023 in Thin Solid Films
25 November 2024 in Microsystems & Nanoengineering
Wireless local area network (WLAN) has gained widespread application as a convenient network access method, demanding higher network efficiency, stability, and responsiveness. High-performance filters are crucial components to meet these needs. Film bulk acoustic resonators (FBARs) are ideal for constructing these filters due to their high-quality factor (Q) and low loss. In conventional air-gap type FBAR, aluminum nitride (AlN) is deposited on the sacrificial layer with poor crystallinity. Additionally, FBARs with single-crystal AlN have high internal stress and complicated fabrication process. These limit the development of FBARs to higher frequencies above 5 GHz. This paper presents the design and fabrication of FBARs and filters for WLAN applications, combining the high electromechanical coupling coefficient ( $${K}_{{\rm{t}}}^{2}$$ ) of Al0.8Sc0.2N film with the advantages of the thin film transfer process. An AlN seed layer and 280 nm-thick Al0.8Sc0.2N are deposited on a Si substrate via physical vapor deposition (PVD), achieving a full width at half maximum (FWHM) of 2.1°. The ultra-thin film is then transferred to another Si substrate by wafer bonding, flipping, and Si removal. Integrating conventional manufacturing processes, an FBAR with a resonant frequency reaching 5.5 GHz is fabricated, demonstrating a large effective electromechanical coupling coefficient ( $${{k}}_{{\rm{eff}}}^{2}$$ ) of 13.8% and an excellent figure of merit (FOM) of 85. A lattice-type filter based on these FBARs is then developed for the Wi-Fi UNII-2 band, featuring a center frequency of 5.5 GHz and a −3 dB bandwidth of 306 MHz, supporting high data rates and large throughputs in WLAN applications.
12 October 2023 in Vacuum