1 April 2013 in Chinese Physics B
18 April 2018 in IEEE Transactions on Terahertz Science and Technology
In the field of terahertz (THz) imaging applications, using a 0.18-μm CMOS process, a 1 × 16 low-noise readout integrated circuit (ROIC) is developed for a 1 × 64 Nb 5 N 6 microbolometer array detector. This circuit consists of a digitally programmable current digital-to-analog converter and an amplifier module, which are responsible for biasing the microbolometer and amplifying its output signals with minimum added noise, respectively. Test results show that the ROIC achieves an average gain of ~47 dB and a voltage noise spectral density of ~9.34 nV/√Hz at 10 kHz, which meet the requirements for the THz array detector. Moreover, the responsivity of the Nb 5 N 6 microbolometer detector is -580 V/W, and the corresponding noise equivalent power is 17 pW/√Hz. Together with the ROIC, the 1 × 64 Nb 5 N 6 microbolometer array detector is preliminarily used for THz imaging applications. The imaging results prove that the ROIC can be used with the detector to develop an efficient and low-cost THz imaging system.
3 March 2017 in IEEE Transactions on Applied Superconductivity
We designed a high input impedance cryogenic radio frequency amplifier to scale up a series array of superconducting nanowire single photon detectors for resolving a wide range of photon numbers. The monolithic integrated chip was fabricated by Tower Jazz's 0.18-μm SiGe BiCMOS process. Temperature dependence of the main components, such as silicon germanium heterojunction bipolar transistor, proportional current source, and poly resistor, were characterized to estimate the quiescent point of the amplifier at cryogenic environment. At 4.2 K, a cryogenic amplifier with 6-kΩ input impedance, 20-dB gain, 4 MHz to 1-GHz bandwidth, and 0.9-mW power dissipation was obtained.
10 December 2024 in Optics Express
Single-photon detectors have been adopted in deep space laser communication to improve the sensitivity of the ground receiver. For low-earth-orbit (LEO) laser communication, a ground receiver with upgraded sensitivity offers several advantages, such as reducing the ground telescope aperture size for mobile applications, giving a large tolerance for atmosphere attenuation, and reducing the power requirement for the transmitter in space. On-off keying (OOK) is one of the most common intensity modulations in the LEO laser communications, but is not suitable for conventional single-photon detectors which output photon counting clicks. In this paper, we demonstrate an LEO cube-satellite (CubeSat) to ground communication with a dual-mode superconducting nanowire single-photon detector (SNSPD) that can both operate at single-photon counting regime and quasi-linear mode under 50 Mbps OOK modulation. The CubeSat-to-ground results show that the SNSPD can work well both during the day and at night, and cope effectively with the large fluctuation of optical power in satellite-to-ground links and the significant variation of background photon noise in a day. The optical power corresponding to bit error ratio less than 10−3 is estimated in a separate experiment, which is -45 dBm for low dark counts at night, and -35 dBm for high background noise in the daytime (∼10 Mcps upper limit). This work demonstrates the feasibility of adopting the modified dual-mode SNSPDs in the OOK format satellite-to-ground laser communications both at night and in the day.
3 August 2026 in Applied Physics Letters
On-chip filters are important for integrated terahertz (THz) communication and sensing systems. Deterministic control of resonance multiplicity in compact devices enables flexible spectral filtering. Here, we experimentally demonstrate an on-chip silicon THz filter based on a Bragg-grating-assisted Fabry–Pérot cavity, in which the resonance multiplicity is governed by the relation between the Bragg stopband and the cavity free spectral range (FSR). By engineering this stopband–FSR relation, single-, double-, and triple-resonance states are achieved within the 360–390 GHz band, with a packaged insertion loss of approximately 6 dB. The single-resonance device exhibits a through-port transmission minimum approaching −40 dB and a loaded quality factor of QL = 809.5. This work provides a compact strategy for deterministic spectral-state engineering in integrated THz filters.
22 June 2026 in Applied Physics Letters
Miniaturized terahertz (THz) photonic receivers with built-in frequency selectivity are crucial for integrated THz sensing and communication systems. Silicon photonic crystal waveguides (PCWs) provide a dispersion-engineered platform for THz guiding, yet realizing compact, highly sensitive, and well-isolated multi-channel receivers on a single chip remains challenging. Here, we demonstrate an integrated three-channel THz photonic crystal detector based on an isosceles-triangle-lattice PCW side-coupled to multiple point-defect cavities, each hosting a monolithically integrated Nb5N6 microbolometer. Three spatially separated cavities define distinct narrowband channels around 0.43 THz for on-chip frequency-division-multiplexed detection. By converting a single silicon PCW into a scalable, frequency-division-multiplexed detector array, this work offers a practical route toward integrated THz spectrometers and multi-band front ends for on-chip THz microsystems.