28 March 2016 in IEEE Transactions on Industrial Electronics
A hybrid pulse width modulation (PWM) strategy for the postfault grid-connected three-phase rectifier is proposed in this paper to achieve a reduced current stress on the dc-link capacitors. The capacitor current per sampling period is investigated, which consists of the effective duty ratio-based currents and the ineffective duty ratio-based currents. The currents introduced by the ineffective duty ratio are highly dependent on the allocation of the ineffective duty ratio. Therefore, this degree of freedom of the ineffective duty ratio allocation can be utilized to minimize the capacitor current. Then, the effect of the ineffective duty ratio allocation on the amplitudes of the capacitor current is analyzed. Based on this analysis, the optimized ineffective duty ratio allocations are proposed, where the ineffective duty ratios are flexibly allocated with respect to the vector angle of the ac current. Furthermore, a novel distribution of the vector plane is developed for the proposed hybrid space vector modulation (HBSVM) strategy. Moreover, the root-mean-square (RMS) values of the capacitor current are used to evaluate the performance of the proposed hybrid PWM strategy. The analytical results demonstrate that the proposed HBSVM strategy results in the reduced capacitor current RMS, which avoids a failure of the dc-link capacitors. Finally, the experimental results validate the effectiveness of the proposed HBSVM strategy.
16 February 2018 in Particulate Science and Technology
Sn-doped BiOCl (Sn/BiOCl) photocatalysts were synthesized by a precipitation method using Bi(NO3)3 · 5H2O as a bismuth source, SnCl2 as an Sn source, imidazole hydrochloride as a chlorine source, a solvent, and a template agent. The photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy, transmission electron microscopy, surface area analysis (Brunauer, Emmett and Teller [BET]), and diffuse reflectance spectroscopy. The XRD results showed a greater increase in the peak intensity of Sn/BiOCl because of its high degree of crystallinity. The UV–Vis results indicated a redshift from 368 nm (BiOCl) to 418 nm (Sn/BiOCl), leading to the reduced band gap of BiOCl because of Sn doping in BiOCl. The Sn/BiOCl not only retained ultraviolet photocatalytic activity of BiOCl but also showed visible photocatalytic activity. The BET results showed that the surface area of Sn/BiOCl (23.35 m2 ) was bigger than that of BiOCl (13.54 m2 g). The bigger surface show higher photocatalytic activity due to more contact opportunity between reactants. Hence, the increased photocatalytic activity of Sn/BiOCl in the degradation of rhodamine B can be attributed to a higher degree of crystallinity, larger surface area, and broader range of optical absorption. The Sn/BiOCl needed only 20 min under visible light and 40 min under ultraviolet light to completely degrade rhodamine B. Moreover, the photocatalytic experiment did not require any other chemical reagent such as H2O2. The microstructures of BiOCl and Sn/BiOCl ensured that the catalyst still has high recovery rate when it is reused. The microstructures of catalyst have a little of loss.
23 January 2020 in Separation Science and Technology
A series of [EMIM]DEP/nC3H4O4 (n = 1, 2, 3) deep eutectic solvents (DESs) were synthesized by heating and stirring the mixture of 1-ethyl-3-methylimidazolium diethylphosphate ([EMIM]DEP) and propanedioic acid (C3H4O4). [EMIM]DEP/2C3H4O4 was characterized by Fourier transform infrared (FT-IR), 1H nuclear magnetic resonance (1H NMR), and thermogravimetric analysis (TGA). Dibenzothiophene (DBT) in model oil was removed using the DESs as an extractant and catalyst, and H2O2 as an oxidant. The influence parameters of different systems, temperature, n(H2O2)/n(S), dosage of [EMIM]DEP/2C3H4O4, and the sulfide type on desulfurization were investigated. The experimental results show that removal rate of DBT can attach to 98.2%. FT-IR analysis of DBT, DESs, and the mixture (DBT-DESs) show that there is an interaction between DBT and DESs.
22 March 2017 in Inorganic and Nano-Metal Chemistry
(Ionic Liquid-BiPO4) IL-BiPO4 was synthesized by sonochemical process at 70C using 1-methylimidazolium dehydrogenate phosphate ([Hmim] H2PO4) and Bi(NO3)3.5H2O as raw material. A simple synthesized method of BiPO4 was carried out with IL at moderate condition. Moreover, the ionic liquid (IL) is environmentally friendly. The IL are synthesized using 1-methylimidazolium and H2PO4 as raw materials. The IL also is a surface agent showing excellent performances such as low viscosity, high dispersion and good structure-direction. Moreover, IL can be reused. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), surface area analysis (BET), and diffuse reflectance spectroscopy. The XRD results show an increase in peak intensity for IL-BiPO4, and diffusive reflectance spectra reveal that there is a red shift in the optical absorption, which indicates a decrease in the band gap in IL-BiPO4. BET analytic results show that IL-BiPO4 is three times as large special surface as Na-BiPO4. Spindlelike IL-BiPO4 and rod-like Na-BiPO4 were observed by SEM and TEM. The IL-BiPO4 exhibits excellent UV photocatalytic activity and degradation for methyl blue solution compared with Na-BiPO4.