Xiuping Li

Xiuping Li

Auto-generated profile, based on publicly available information

Xiuping Li

College of Science, Liaoning Petrochemical University, Fushun, Liaoning Province, China

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 December 2015 in Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry
Verified
Journal Article
Closed access
XLXiuping Li
Xiuping Li
RZRongxiang Zhao
Rongxiang Zhao
HJHeng Jiang
Heng Jiang
YZYuchun Zhai
Yuchun Zhai
PMPeihua Ma
Peihua Ma
ZnO-CeO2-TiO2 composite oxide was rapidly synthesized by the combustion method using ascorbic acid as combustion agent. The synthesized sample was characterized by XRD, FI-IR, UV-Vis, BET, and SEM. The morphologies and the ultraviolet absorption properties of ZnO-CeO2-TiO2 composite oxide were optimized by changing molar ratio of burning agent, zinc, titanium and cerium ions. The composite oxide exhibits stronger ultraviolet absorption and better photocatalytic properties when mole ratios of burning agent, zinc, titanium, and cerium ions are 8:4:0.25:1. The reason can be attributed to together ZnO, TiO2 with CeO2 degraded and decolorized the methylene blue. The composite oxide shows better decolorizing effect when the molar ratio of burning agent, zinc, titanium, and cerium ions is 8:1:0.25:1. The reason can be attributed to the XRD pattern peak of the composite is completely the same as CeO2, but the composite has better crystalline, so the properties of composite is superior to CeO2.

27 July 2021 in New Journal of Chemistry
Verified
Journal Article
Closed access
PDF file
XLXiao-Yi Liu
Xiao-Yi Liu
XLXiu-Ping Li
Xiu-Ping Li
RZRong-xiang Zhao
Rong-xiang Zhao
HZHao Zhang
Hao Zhang
The n %-SnO 2 /SiO 2 ( n = 2, 4, 6) supported catalyst was prepared by the sol–gel and calcination method. Compared with the traditional impregnation method, the catalyst prepared by sol–gel method has higher oxidative desulfurization activity.

16 February 2018 in Particulate Science and Technology
Verified
Journal Article
Closed access
XLXiuping Li
Xiuping Li
RZRongxiang Zhao
Rongxiang Zhao
XGXiaohan Gao
Xiaohan Gao
Sn-doped BiOCl (Sn/BiOCl) photocatalysts were synthesized by a precipitation method using Bi(NO3)3 · 5H2O as a bismuth source, SnCl2 as an Sn source, imidazole hydrochloride as a chlorine source, a solvent, and a template agent. The photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy, transmission electron microscopy, surface area analysis (Brunauer, Emmett and Teller [BET]), and diffuse reflectance spectroscopy. The XRD results showed a greater increase in the peak intensity of Sn/BiOCl because of its high degree of crystallinity. The UV–Vis results indicated a redshift from 368 nm (BiOCl) to 418 nm (Sn/BiOCl), leading to the reduced band gap of BiOCl because of Sn doping in BiOCl. The Sn/BiOCl not only retained ultraviolet photocatalytic activity of BiOCl but also showed visible photocatalytic activity. The BET results showed that the surface area of Sn/BiOCl (23.35 m2 ) was bigger than that of BiOCl (13.54 m2 g). The bigger surface show higher photocatalytic activity due to more contact opportunity between reactants. Hence, the increased photocatalytic activity of Sn/BiOCl in the degradation of rhodamine B can be attributed to a higher degree of crystallinity, larger surface area, and broader range of optical absorption. The Sn/BiOCl needed only 20 min under visible light and 40 min under ultraviolet light to completely degrade rhodamine B. Moreover, the photocatalytic experiment did not require any other chemical reagent such as H2O2. The microstructures of BiOCl and Sn/BiOCl ensured that the catalyst still has high recovery rate when it is reused. The microstructures of catalyst have a little of loss.

12 April 2016 in Research on Chemical Intermediates
Verified
Journal Article
Closed access
PDF file
RZRong-xiang Zhao
Rong-xiang Zhao
XLXiuping Li
Xiuping Li
KLKehong Lin
Kehong Lin
XGXiaohan Gao
Xiaohan Gao

8 May 2019 in RSC Advances
Verified
Journal Article
Open access
PDF file
RZRong-xiang Zhao
Rong-xiang Zhao
XLXiu-Ping Li
Xiu-Ping Li
CMChunfeng Mao
Chunfeng Mao
LHLiangpei Hou
Liangpei Hou
XGXiaohan Gao
Xiaohan Gao
N,N-Dimethylformamide hydrochloric acid/XMCln ([HDMF]Cl/XMCln, M = Zn or Fe, n = 2 or 3) was synthesized by stirring the mixture of [HDMF]Cl and metal chloride. [HDMF]Cl-based DES was characterized by FT-IR spectroscopy, ESI-MS and 1H-NMR spectroscopy. The oxidative desulfurization activity was investigated using [HDMF]Cl/0.2FeCl3 and [HDMF]Cl/ZnCl2 as the extractant and catalyst, and hydrogen peroxide (H2O2) as the oxidant. The desulfurization rate can reach up to 98.08% and 99.2% for DBT using [HDMF]Cl/0.2FeCl3 and [HDMF]Cl/ZnCl2, respectively. After recycling for 7 times, the removal rate of DBT still can reach more than 97%.

23 January 2020 in Separation Science and Technology
Verified
Journal Article
Closed access
HLHaoran Liu
Haoran Liu
SCSiyu Chen
Siyu Chen
XLXiuping Li
Xiuping Li
RZRongxiang Zhao
Rongxiang Zhao
YSYue Sun
Yue Sun
A series of [EMIM]DEP/nC3H4O4 (n = 1, 2, 3) deep eutectic solvents (DESs) were synthesized by heating and stirring the mixture of 1-ethyl-3-methylimidazolium diethylphosphate ([EMIM]DEP) and propanedioic acid (C3H4O4). [EMIM]DEP/2C3H4O4 was characterized by Fourier transform infrared (FT-IR), 1H nuclear magnetic resonance (1H NMR), and thermogravimetric analysis (TGA). Dibenzothiophene (DBT) in model oil was removed using the DESs as an extractant and catalyst, and H2O2 as an oxidant. The influence parameters of different systems, temperature, n(H2O2)/n(S), dosage of [EMIM]DEP/2C3H4O4, and the sulfide type on desulfurization were investigated. The experimental results show that removal rate of DBT can attach to 98.2%. FT-IR analysis of DBT, DESs, and the mixture (DBT-DESs) show that there is an interaction between DBT and DESs.