1 January 2015 in Journal of Propulsion and Power
This paper describes the numerical investigation of convergent conical nozzles done in the AIAA Propulsion Aerodynamic Workshop number one. Axisymmetric, three-dimensional, and unsteady computations were conducted for three main test cases. These test cases were 1) axisymmetric convergent conical nozzles of 15, 25, and 40 deg half-angle as well as a reference nozzle; 2) the 25 deg half-angle nozzle with a splitter plate inserted in its plane of symmetry; and 3) the vortex shedding observed at the base of the splitter plate. The effects of base drag and freestream Mach number on calculated velocity coefficient were analyzed. The discharge coefficients and velocity coefficients determined from the axisymmetric solutions matched the experimental data well. The wall Mach numbers and sonic line positions were also well predicted. In the axisymmetric computations, the shock position was well captured by the fine grid. However, when the nozzle pressure ratio was high, the three-dimensional Reynolds-averaged Navi...