1 August 2008 in Fusion Science and Technology
Research conducted in the last fifty years has shown that one of the most efficient techniques of removing tritium from the heavy water used as moderator and coolant in CANDU reactors (as that operated at Cernavoda, Romania) is hydrogen cryogenic distillation.Designing and implementing the concept of cryogenic distillation columns require experiments to be conducted as well as computer simulations. Particularly, computer simulations are of great importance when designing and evaluating the performances of a column or a series of columns. Experimental data collected from laboratory work will be used as input for computer simulations run at larger scale (for The Pilot Plant for Tritium and Deuterium Separation) in order to increase the confidence in the simulated results.Studies carried out were focused on the following:- Quantitative analyses of important parameters such as the number of theoretical plates, inlet area, reflux flow, flow-rates extraction, working pressure, etc.- Columns connected in...
1 September 2019 in Fusion Engineering and Design
1 August 2008 in Fusion Science and Technology
The CANDU reactor from the Nuclear Power plant Cernavoda, Romania is the most powerful tritium source from Europe. This reactor is moderated and cooled by heavy water that becomes continuously contaminated with tritium. Because of this reason, the National R&D Institute for Cryogenic and Isotopic Technologies developed a detritiation technology based on catalytic isotopic exchange and cryogenic distillation.The main effort of our Institute was focused on finding more efficient catalysts with a longer operational life. Some of the tritium removal processes involved in Fusion Science & Technology use this type of catalyst. Several Pt/C/PTFE hydrophobic catalysts that could be used in isotopic exchange process were produced. The present paper presents a comparative study between the physical and morphological properties of different catalysts manufactured by impregnation at our institute. The comparison consists of a survey of specific surface, pores volume and pores distribution.
1 November 2018 in Fusion Engineering and Design
1 September 2019 in Fusion Engineering and Design
23 March 2015 in Fusion Science and Technology
The main purpose of this paper is to present a comprehensive software, SICA, designed to be used in water-hydrogen liquid phase catalytic exchange process (LPCE). The software calculates the water-gas catalytic isotopic exchange process, following the transfer of any H, D or T isotope from water to gas and vice versa. This software is useful both for design and laboratory-based research; the type of the catalytic filling (ordered or random) can be defined for any of these two cases, the isotopic calculation being specific to the package type. For the laboratory-based research, the performance of a catalytic packing can be determined defining the type and using the experimental results. Performance of the mixed catalytic packing is defined by mass transfer constants for each catalytic and hydrophilic package in that specific arrangement, and also for the isotope whose transfer is studied from one phase to another. Also, it has been established a link between these constants and commonly used parameters for the fillings performance defined by HETP (height equivalent of Theoretical Plate). To demonstrate the availability of the software, we presented a comparative analysis of water-gas catalytic isotopic exchange on a column equipped with three types of filling: successive layers, random or structured (ordered package filled with catalyst). The program can be used for the LPCE process calculation, process used at detritiation facilities for CANDU reactors or fusion reactors.