5 May 2020 in Fusion Science and Technology
The development of commercial fusion power production using deuterium and tritium has been ongoing worldwide for decades and the European version of DEMO will undergo conceptual design between 2021 and 2027. Among the different ways to provide electrical power, nuclear fusion will be publicly accepted if the environmental impact is at tolerable levels. The auxiliary power requirements of fusion power reactors will need to be optimized, and heat will need to be efficiently converted to electrical power through the usage of high-temperature steam. On the other hand, heat might need to be intermittently stored to account for pulsed plasma operation, on the expense of the temperature level available for steam generation. Tritium is highly mobile and its management as far as containment and confinement are concerned becomes more difficult with the increasing temperatures of the structural materials; any effluents and releases should be kept to an absolute minimum. Therefore, tritium containment and confinement equipment and procedures need to be well integrated into the design and into the operation of fusion power reactors. This paper focuses on the topics of the main tritium technologies under development in the EU DEMO Breeding Blanket Program, covering especially tritium breeding and extraction technologies. In addition, the identification of the main tritium sources as far as permeation and escape into the environment are concerned and the main barriers for the mitigation of tritium release into the environment are introduced.
2 March 2017 in Fusion Science and Technology
The design of ITER tritium processing systems will benefit from experimental data and process validation based on experimental facilities that are ITER scale relevant. Several rigs and experimental facilities have been enhanced and developed at the Tritium Laboratory Karlsruhe (TLK) in order to explore a wide range of envisaged scenarios of tritium plant systems, such as the Water Detritiation System (WDS), Isotope Separation System (ISS) and highly tritiated water processing. In the last few years, detailed experimental investigations and process modeling have been conducted in relation to the Combined Electrolysis Catalytic Exchange and Isotope Separation (CECE-ISS) systems which were focused on evaluation of the impact of deuterium build-up and accumulation in the CECE system. An enhanced configuration of the ITER WDS has been developed, that allows mitigation of the effects due to deuterium accumulation and reduction of the tritium inventory within the electrolysis system. In addition, the benefits concerning the interface between the WDS and ISS are presented. Significant efforts have been made to enhance the simulation tool TRIMO++ that was calibrated against the experimental results collected from the experimental rigs. The new features of the simulation tools are introduced as well. The main references of a new method aiming to mitigate the tritium permeation from the tritium processes streams into the non-contaminated streams such as steam generators are introduced. The reference configuration of first phase of the experimental rigs and the preliminary experimental activities are presented as well.
1 September 2019 in Fusion Engineering and Design
1 June 2009 in Fusion Engineering and Design