1 July 2016 in Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences
Preventing segregation in flowing granular mixtures is an ongoing challenge for industrial processes that involve the handling of bulk solids. A recent continuum-based modelling approach accurately predicts spatial concentration fields in a variety of flow geometries for mixtures varying in particle size. This approach captures the interplay between advection, diffusion and segregation using kinematic information obtained from experiments and/or discrete element method (DEM) simulations combined with an empirically determined relation for the segregation velocity. Here, we extend the model to include density-driven segregation, thereby validating the approach for the two important cases of practical interest. DEM simulations of density bidisperse flows of mono-sized particles in a quasi-two-dimensional-bounded heap were performed to determine the dependence of the density-driven segregation velocity on local shear rate and particle concentration. The model yields theoretical predictions of segregation patterns that quantitatively match the DEM simulations over a range of density ratios and flow rates. Matching experiments reproduce the segregation patterns and quantitative segregation profiles obtained in both the simulations and the model, thereby demonstrating that the modelling approach captures the essential physics of density-driven segregation in granular heap flow.
10 September 2018 in Physical Review Fluids
We characterize the local concentration dependence of segregation velocity and segregation flux in both size and density bidisperse gravity-driven free-surface granular flows as a function of the particle size ratio and density ratio, respectively, using discrete element method simulations. For a range of particle size ratios and inlet volume flow rates in size-bidisperse flows, the maximum segregation flux occurs at a small particle concentration less than 0.5, which decreases with increasing particle size ratio. The segregation flux increases up to a size ratio of 2.4 but plateaus from there to a size ratio of 3. In density bidisperse flows, the segregation flux is greatest at a heavy particle concentration less than 0.5, which decreases with increasing particle density ratio. The segregation flux increases with increasing density ratio for the extent of density ratios studied, up to 10. We further demonstrate that the simulation results for size-driven segregation are in accord with the predictions of the kinetic sieving segregation model of Savage and Lun [ J. Fluid Mech. 189, 311 (1988)].
1 January 2019 in Chemical Engineering Science
5 December 2017 in AIChE Journal
28 January 2025 in PNAS Nexus
Mechanical metamaterials with engineered failure properties typically rely on periodic unit cell geometries or bespoke microstructures to achieve their unique properties. We demonstrate that intelligent use of disorder in metamaterials leads to distributed damage during failure, resulting in enhanced fracture toughness with minimal losses of strength. Toughness depends on the level of disorder, not a specific geometry, and the confined lattices studied exhibit a maximum toughness enhancement at an optimal level of disorder. A mechanics model that relates disorder to toughness without knowledge of the crack path is presented. The model is verified through finite element simulations and experiments utilizing photoelasticity to visualize damage during failure. At the optimal level of disorder, the toughness is more than 2.6× of an ordered lattice of equivalent density.
13 March 2019 in Physical Review E
Diffusion is an important particle behavior in granular flow. Although granular diffusion has been studied for decades, the diffusion of size bidisperse particles has not been well understood. In this paper, discrete element method simulations with the Lees-Edwards boundary condition are performed to quantify the relation between the diffusion coefficient () and flow parameters for size bidisperse spheres in dense granular flow. The influences of the shear rate (), the solids fraction , and the diameter ratio of particles on diffusion are studied. The effects of the friction coefficient (μ) and the restitution coefficient () are also investigated. The results indicate that while small particles diffuse faster than large particles in a binary system the volume weighted average diffusion coefficient is proportional to the shear rate and the square of the volume weighted average particle diameter, , and it is inversely proportional to the solids fraction. The quantified relation is given as , where , and this relation is not sensitive to the diameter ratio for . The diffusion coefficient is not sensitive to the friction coefficient except for the extreme condition where , and it is also not sensitive to the restitution coefficient between 0.3 and 0.9.