29 April 2017 in Eastern-European Journal of Enterprise Technologies
The conditions for the occurrence of auto-balancing for the rigid axisymmetric rotor on two isotropic elastic supports, balanced by any quantity of passive auto-balancers of any type, are defined. The empirical criterion for the occurrence of auto-balancing is applied. It is established that the dynamic auto-balancing of the rotor (in two or more correction planes by several passive auto-balancers) is possible only in the case of the long rotor. There can be any quantity of auto-balancers. The long rotor has two resonant rotational speeds. The auto-balancing occurs at above resonance speeds. The static auto-balancing of the rotor (in one correction plane) is possible at any quantity of auto-balancers in such cases. If the rotor is long, then it has two resonant speeds and one additional speed, located between the resonant ones. The auto-balancing occurs between the first resonant speed of rotor rotation and additional speed, and over the second resonant speed. If the rotor is spherical, then it has one resonant speed and the additional speed, which is higher than the resonant one. The auto-balancing occurs between the resonant and additional speeds. If the rotor is short, then the conditions for the occurrence of auto-balancing depend on the distance between the rotor center of mass and the correction plane. If this distance does not exceed the certain boundary size, then the rotor has the only resonant speed and the auto-balancing occurs at above resonance speeds. Otherwise, the rotor has one resonant and one additional speed, which is higher than the resonant one. The auto-balancing occurs between these speeds.The additional speed is due to the installation of the auto-balancers on the rotor. Upon transition to it, the behavior of auto-balancers changes. At slightly lower rotor rotational speeds, the auto-balancers reduce the rotor imbalance, and at slightly higher ones – increase it.
1 October 2007 in International Applied Mechanics
1 November 2007 in International Applied Mechanics
30 May 2019 in Eastern-European Journal of Enterprise Technologies
A procedure of studying stationary motions of a rotor with attached bodies (auto-balancer) using a flat model as an example
1 July 2014 in International Applied Mechanics
31 October 2016 in Eastern-European Journal of Enterprise Technologies
We formulated the empirical criterion for the occurrence of autobalancing for the rotors balanced by passive autobalancers. The criterion is applicable for rigid and elastic rotors on ductile supports and for elastic rotors on rigid supports. The criterion is intended to answer the question if it is possible in principle, and under what conditions, to automatically balance a particular rotor n by passive autobalancers of any type in n planes of correction. In accordance with the criterion, the possibility of applying passive autobalancers for rotor balancing (in “zero approximation”) is determined not by the type of autobalancers, but by rotor itself. In this case, reaction of rotor to the elementary imbalances, applied in the required planes of correction, is essential. That is why the criterion makes it possible to obtain universal conditions for the occurrence of autobalancing, applied for any types of autobalancers. The criterion is applied in the following sequence. 1. A physicalmechanical model of rotor with elementary imbalances, located in the required planes of correction, is described. 2. Differential equations of motion of the unbalanced rotor are derived. 3. Steady motion of a rotor, which corresponds to the applied elementary imbalances, is searched for. 4. A functional of the criterion for the occurrence of autobalancing is built. As a rule, this is a quadratic form from elementary imbalances. 5. By analysis of the functional (sign definiteness of the obtained quadratic form), conditions for the occurrence of autobalancing are determined. The result is conditions of two types. The first ones set limitations to the massinertia rotor characteristics. The second ones are a range of angular speeds of rotor rotation, at which autobalancing will occur provided the first conditions are met.The criterion is used for the axisymmetric rotor with a fixed point and isotropic elastic support. It was found that autobalancing will occur only in the case of a long rotor, relative to the point O, independent of the number of autobalancers (planes of correction) at the speeds, which exceed the only resonance speed of rotor rotation.