9 October 2024 in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
In this study, an unsteady numerical simulation method based on dynamic grids was established to solve unsteady aircraft icing processes. The dual-time step method was used to achieve the time advancement of the transient airflow and droplets fields. The droplets trajectory was calculated using the Euler method, which incorporates a supercooled large droplets model. The transient evolution of the water film and ice layer on the substrate surface was considered in the icing thermodynamic model. The accuracy of the unsteady method for ice-shape prediction was verified via comparison and analysis of numerical examples. Additionally, the rime and glaze ice formation processes were explored, and the coupling effects of ice horn growth and the air convective heat transfer coefficient, water collection coefficient, and water film flow on the substrate surface were studied. The ice shapes calculated by unsteady and quasi-steady methods were compared. The results indicated that the latter predicts a larger icing range than the former. Moreover, there may be more obvious distinctions between these two methods in predicting glaze ice.
1 February 2025 in Physics of Fluids
The flow and heat transfer of the oblique impact of a droplet on a stationary liquid film with various dimensionless thicknesses (01.0–0.5) are investigated experimentally and numerically. A superhydrophobic guideway is used to create the oblique impact of a droplet, which causes subsequent asymmetric crown structure and splashing. The thermal level set method is employed to capture the deformation and heat transfer of warm droplets' oblique impact on a cold liquid film. A parameter study of the effect of Weber number, oblique angle, and liquid film thickness on geometrical characteristics and wall heat flux is carried out. The results show that in the downstream direction, during the crown rising period, the radius is independent of the normal Weber number but increases for a larger tangential Weber number and a thinner liquid film. The maximum downstream crown height increases with an increase in the Weber number and exhibits a non-monotonic trend with the liquid film thickness. The heat transfer rate between the liquid film and surface decreases with larger oblique angles and thicker liquid films while having a poor dependence on the Weber number. In addition, the critical oblique angles for prompting splashing at different liquid film thicknesses are presented. Finally, modified thermodynamics models and splashing thresholds for the liquid film are developed to further enhance the understanding of aircraft icing.