Fruit and vegetable harvest efficiency depends on the mechanization and automation of production. The available literature lacks the results of research on the applicability of pneumatic end effectors among grippers for the robotic harvesting of strawberries. To determine their practical applications, a series of tests was performed. They included the determination of the morphological indicators of the strawberry, fruit suction force, the real stress exerted by fruit suckers and the degree of fruit damage. The fruits’ morphological indicators included the relationships between the weight and geometrical dimensions of the tested fruit, the equivalent diameter, and the sphericity coefficient. The fruit suction force was determined on a stand equipped with a vacuum pump, and control and measurement instruments, as well as a MTS 2 testing machine. The necrosis caused by tissue damage to the fruits by suction cup adhesion was assessed by counting the necrosis surface areas using the LabView programme. The assessment of the necrosis was conducted immediately upon the test’s performance, after 24 and after 72h. The stress values were calculated by referring the values of the suction forces obtained to the surface of the suction cup face. The tests were carried out with three constructions of suction cups and three positions of suction cup faces on the fruits’ surface. The research shows that there is a possibility for using pneumatic suction cups in robotic picking heads. The experiments performed indicate that the types of suction cups constructions, and the zones and directions of the suction cups’ application to the fruit significantly affect the values of the suction forces and stresses affecting the fruit. The surface areas of the necrosis formed depend mainly on the time that elapses between the test and their assessment. The weight of strawberry fruit in the conducted experiment constituted from 13.6% to 23.1% of the average suction force.
This paper presents the design of a strawberry fruit head gripper unit, together with the concept of a control system for the operation of its mechanisms and vision system. The developed design consists of three specialised mechanisms: positioning, grasping, and cutting off of the fruit. A Finite Element Method (FEM) model was developed for the described design. Next, calculations were carried out, based on which the construction materials were selected. The key performance parameters of the functional model, built on the basis of the developed design concept, were verified under laboratory conditions. In tests carried out on the possible hematoma caused by exceeding the breaking stress induced by the pressure of the encompassing jaws on the fruit, it was found that none of the fruit tested suffered mechanical damage as a result of the sensor triggering force, and the average length of the trimmed stalk was approximately 14 mm. The designed head gripper, together with the proposed automation system, will contribute to improving harvesting precision, and this will favour a reduction in the quantitative and qualitative losses of the harvested crop. The experimental tests conducted under harvesting conditions showed a high efficiency of 95% in identifying ripe fruit, and the harvesting efficiency of the robotic arm was 90%.
The treatment of medical wastewater by the peroxone (AOP) and electro-peroxone (E-peroxone) processes was analyzed. The E-peroxone process is based on the production of hydrogen peroxide electrochemically from an O2 and O3 gas mixture produced in sparged ozone generator effluent using graphite-polytetrafluorethylene cathodes. The electrogenerated H2O2 reacts with sparged ozone to produce hydroxyl radicals. All advanced oxidation processes presented in this study effectively removed chemical oxygen demand (COD) by up to 87%. The use of E-peroxone showed 15% better results in COD reduction than conventional peroxone. The research suggests that E-peroxone is more sufficient at removing pollutants in wastewater than peroxone. Hence, E-peroxone was found to be more cost-effective than AOP in this case.
The research attempts to determine the possibility of using the phenomenon of secondary luminescence of organic matter to assess its properties, which are important from the point of view of food quality parameterization. In order to conduct the experiment, a measuring station equipped with a photomultiplier was used to identify individual photons emitted by organic matter. There was a difference in the number of photons recorded by the photon measuring system within selected groups of food products, this statement concerns the final products and components constituting their recipe. It has been observed that there is a practical possibility of differentiating organic matter in terms of the degree of photon emission.
Colour evaluation, using its numerous parameters, is applied to assess qualitative changes of products resulting from the use of specific technological treatment. The study investigates the possibility of using the CIE L*a*b* method to determine selected colour coefficients of fried potato products. Statistical analysis of the results was performed at the assumed significance level of α = 0.05. It was demonstrated that the method proposed (CIE L*a*b*) is effective in evaluating the colour of French fries modified with the use of raw material exposed to ultraviolet radiation in the C band.
Photon emission from 7 different craft beers manufactured for “Trzech Kumpli” brewery was analyzed. According to Popp's hypothesis, the quality of food can be significantly related to the optimal and characteristic level of photon emissions from the food products. The analysis of the correlation between the intensity of photon emission and the percentage of alcohol, extract as well as the degree of bitterness of tested beers expressed in IBU was carried out. The intensity of photon emission during the measurements was also analyzed. Statistically significant differentiation in photon emission was found within analyzed beer, while the intensity of photon emission was at a similar level during the measurements. The correlation coefficient R between the predicted number of emitted photons and the percentage of alcohol, extract or degree of bitterness was 0.8637, 0.7926 and 0.9820, respectively.