State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science and Technology , Wuhan 430074, Hubei, China
Auto-generated profile, based on publicly available information
Zijian Zhou
State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science and Technology , Wuhan 430074, Hubei, China
In this paper, a permanent-magnet-quadrupole doublet lens with strong-focusing is designed and manufactured. Such an instrument could solve the problem of irregular beam spots produced by the weak focusing of conventional solenoid-focusing systems in low-energy electron irradiation accelerators. It could provide a better and more appropriate initial beam spot before the beam enters the subsequent magnetic spreading system or magnetic scanning system, thus, improving the irradiation uniformity. The association of the parameters of the rectangular permanent magnet with the quadrupole magnetic field is investigated. Focusing results, obtained using irregular beam spots with different profiles and different energies, and magnetic field measurement results, both from the instrument, verify the engineering feasibility of this permanent-magnet-quadrupole doublet lens.
29 September 2023 in Physical Review Accelerators and Beams
The growing interest in the field of electron irradiation accelerators has led to various research opportunities, with a crucial emphasis on enhancing the irradiation homogeneity of accelerators to advance the industry of the irradiation process. In this study, we introduce a tunable and compact uniform spreading beamline that comprises a permanent magnet quadrupole doublet and an electron beam permanent magnet spreading system. This beamline could solve the problem of poor irradiation homogeneity caused by irregular beam spots in electron irradiation accelerators. Flexible and tunable magnetic yokes enable rapid changes to the magnetic field distribution based on different beam spot profiles or irradiation processing requirements, achieving uniform spreading of different beam spots and improving irradiation homogeneity. Additionally, we evaluated the performance of rectangular permanent magnet poles to minimize errors in future accelerator applications. The implementation of this beamline enhances irradiation quality and provides an experimental foundation for further investigating the interaction between electron beam irradiation rates and materials.
In this work, a permanent-magnet electron-beam-spread system for irradiation has been developed and constructed, and its performance was experimentally measured with a beam. This work is helpful to counter beam-tail sweep issues (resulting in excessive doses at the ends of each sweep). Using the beam’s optical transmission matrix and beam dynamics simulations, we analyzed the impact of the individual parameters of a special quadrupole magnet and a special octupole magnet on the beam spread, and we determined the optimal parameters for irradiation production. To meet the design requirements of the magnetic field, the yoke structure was optimized, and permanent magnets with very similar degrees of magnetization and small magnetic declinations were used. The permanent-magnet electron-beam-spread system was applied to an actual 0.5-MeV electron irradiation accelerator, and the engineering feasibility of the permanent magnet electron beam spread system was fully verified by measuring the uniformity of the beam after the spread.
18 October 2024 in Nuclear Engineering and Technology
The electron gun, as a critical device for emitting high-speed electrons, determines the electron beam current and quality in electron beam additive manufacturing (EBAM). In this article, a tetrode electron gun with a control electrode is designed to improve the quality and controllability of the electron beam. The control electrode, optimized by parametric simulation, provides secondary confinement of the electron beam. This confinement aims to reduce the beam spot size and emittance while decoupling spot size from the current. Specifically, the maximum attainable current reaches 200 mA, while the beam waist radius contracts to a mere 1.09 mm. The normalized emittance, a crucial parameter, measures at 1.536 $\times$ 10 $^{-\text{7}}$$\text{m}\cdot\text{rad}$ . Furthermore, stability analysis of the electron gun explores the influence of electrode potential on its performance. By co-regulating the bias voltage and the control voltage, the electron beam current can smoothly rise to 200 mA while maintaining the beam spot radius of 2 mm. This article indicates the tetrode electron gun’s potential for precise control, thereby improving the quality and precision of high melting point alloy additive manufacturing processes.
19 December 2025 in Composites Part A: Applied Science and Manufacturing