1 February 2018 in International Journal of Geomechanics
A new gradation equation that can describe the particle-size distribution curves of soils with continuous gradation is presented. The results obtained for a large amount of test data from soil gradations prove that the equation is applicable over a wide range of soils, including rockfill, gravel, sand, and clay. Three parameter determination methods are proposed, with the optimization method yielding the best results. The possible values of the parameters m and b in the proposed equation were intensively investigated, and the suggested ranges of the parameters were found to be b < 1 and m > 0. However, for most soils, these parameters have values of –4 < b < 1 and 0 < m < 12. The study of the features of the gradation equation and the resulting curves in P-logd coordinates revealed that the parameter b determines the gradation curve shape. If b ≤ 0.5, the gradation curve is hyperbolic, and if 0.5 < b < 1, the curve is sigmoidal. The parameter m determines the gradation curve slope, which increases with increasing m. Several soil gradations used in earth-rockfill dams worldwide were investigated to summarize the gradation characteristics, and the results revealed that the values of the parameters b and m for the rockfill fall within a narrow range. The proposed equation is more convenient for expressing the soil gradation and makes it possible to quantitatively describe the relationship between the mechanical properties of the rockfill and the gradation.
1 January 2021 in Shock and Vibration
Dynamic response characteristics and antiseismic performance of the structures which were constructed on the super‐deep overburden layer are affected obviously by the seismic motion characteristics of the super‐deep overburden layer foundation. In this paper, the seismic motion characteristics of horizontally stratified super‐deep overburdenIn this paper, the seismic motion characteristics of horizontally stratified super‐deep overburden based on the research results of on‐site in situ tests and indoor material property tests, the horizontal shear layer method that can consider the nonlinear characteristics of dynamic soil deformation and the characteristics of seismic wave propagation in the soil is used to study the characteristics of ground motions of super‐deep and thick overburden level of an earth‐rock dam in China. The influence law of input ground motion characteristics and input ground motion position on seismic response analysis results of overburden ground is studied. Taking the uniform overburden layer model as an example, the coupling influence analysis of soil layer thickness and shear velocity on ground motion response are carried out, and the coupling influence law is proposed. The study shows that the seismic motion propagating characteristics of the earthquake in super‐deep overburden layer is involved, inputting location of the seismic motion affects the results of ground seismic response greatly; super‐deep overburden layer thickness and the soil shear wave velocity on influence law of ground motion characteristics have coupling. When the shear wave velocity of the soil layer is constant, the surface acceleration response has an inflection point with the change of the soil layer thickness; when the thickness of overburden is constant, the surface acceleration response also has an inflection point with the change of shear wave velocity of the soil layer; these inflexion values are influenced by both soil thickness and shear wave velocity.