Two-dimensional (2D) materials have become potential resistive switching (RS) layers to prepare emerging non-volatile memristors. The atomically thin thickness and the highly controllable defect density contribute to the construction of ultimately scaled memory cells with stable switching behaviors. Although the conductive bridge random-access memory based on 2D hexagonal boron nitride has been widely studied, the realization of RS completely relying on vacancies in 2D materials has performance superiority. Here, we synthesize carbon-doped h-BN (C-h-BN) with a certain number of defects by controlling the weight percentage of carbon powder in the source. These defects can form a vacancy-based conductive filament under an applied electric field. The memristor displays bipolar non-volatile memory with a low SET voltage of 0.85 V and shows a long retention time of up to 104 s at 120 °C. The response times of the SET and RESET process are less than 80 ns and 240 ns, respectively. The current mapping by conductive atomic force microscopy demonstrates the electric-field-induced current tunneling from defective sites of the C-h-BN flake, revealing the defect-based RS in the C-h-BN memristor. Moreover, C-h-BN with excellent flexibility can be applied to wearable devices, maintaining stable RS performance in a variety of bending environments and after multiple bending cycles. The vacancy-based 2D memristor provides a new strategy for developing ultra-scaled memory units with high controllability.
Using first principle calculations, we have investigated the adsorption of CO gas on various metal-decorated phosphorene. Almost all of the metals were considered to decorate phosphorene. By comparing binding energy (Eb) and cohesive energy (Ec), only 10 metals (Li, Na, K, Rb, Cs, Ca, Sr, Ba, Pd, and La) can stably decorate phosphorene and avoid clustering. CO adsorptions on these metal-decorated systems were calculated, and the mechanism of interaction between CO and metal atoms was analyzed in detail. Ea shows a significant improvement after metal decoration, excerpt for Rb and Cs. The results imply that Li-, Na-, K-, Ca-, Sr-, Ba-, and La-decorated phosphorene could be used as CO elimination or reversible CO storage.
Stacking two atomic layers together can induce interlayer (sliding) ferroelectricity that is absent in their naturally occurring crystal forms. With the flexibility of two-dimensional materials, more layers could be assembled to give rise to even richer polarization states. Here, we show that three-layer boron nitride can host ferro- and antiferroelectric domains in the same sample. When used as a tunneling junction, the polarization of these domains could be switched in a layer-by-layer procedure, producing multiple resistance states. Theoretical investigation reveals an important role played by the interaction between the trilayer boron nitride and graphene substrate. These findings reveal the great potential and unique properties of 2D sliding ferroelectric materials.
In recent years, many research groups have synthesized ultra-thin silver nanowires (AgNWs) with diameters below 30 nm by employing Cl− and Br− simultaneously in the polyol process. However, the yield of AgNWs in this method was low, due to the production of Ag nanoparticles (AgNPs) as an unwanted byproduct, especially in the case of high Br− concentration. Here, we investigated the roles of Cl− and Br− in the preparation of AgNWs and then synthesized high aspect ratio (up to 2100) AgNWs in high yield (>85% AgNWs) using a Cl− and Br− co-mediated method. We found that multiply-twinned particles (MTPs) with different critical sizes were formed and grew into AgNWs, accompanied by a small and large amount of AgNPs for the NaCl and NaBr additives, respectively. For the first time, we propose that the growth of AgNWs of different diameters and yields can be understood based on the electron trap distribution (ETD) of the silver halide crystals. For the case of Cl− and Br− co-additives, a mixed silver halide crystal of AgBr1−xClx was formed, rather than the AgBr/AgCl mixture reported previously. In this type of crystal, the ETD is uniform, which is beneficial for the synthesis of AgNWs with small diameter (30~40 nm) and high aspect ratio. AgNW transparent electrodes were prepared in air by rod coating. A sheet resistance of 48 Ω/sq and transmittance of 95% at 550 nm were obtained without any post-treatment.
Van der Waals moiré heterostructure have been found to exhibits a robust interfacial ferroelectricity down to atomic thickness, and discovering and understanding the complex polarization state in moiré systems is of fundamental interest to condensed-matter research. In this study, we examine the moiré ferroelectricity in twisted h-BN heterostructure by piezoresponse force microscopy. Due to atomic reconstruction, triangular moiré patterns are detected, and we directly observe sliding ferroelectricity in the center of triangular moiré patterns as well as robust in-plane polarization topology emerging at the boundary of adjacent triangles, which we call edge polarization. The edge polarization possesses non-trivial and robust vortex polarization topology. Our calculations trace the origin of this phenomenon to joined piezoelectric effects with sliding ferroelectricity. This work provides intuitive insights to explore the unique moiré ferroelectricity in non-polar background matrix, and the inherent stability of the topological structures ensures reliable and durable performance of electronic devices.