16 January 2025 in High Power Laser Science and Engineering
We used the PW high-repetition laser facility VEGA-3 at Centro de Láseres Pulsados in Salamanca, with the goal of studying the generation of radioisotopes using laser-driven proton beams. Various types of targets have been irradiated, including in particular several targets containing boron to generate α-particles through the hydrogen–boron fusion reaction. We have successfully identified γ-ray lines from several radioisotopes created by irradiation using laser-generated α-particles or protons including 43Sc, 44Sc, 48Sc, 7Be, 11C and 18F. We show that radioisotope generation can be used as a diagnostic tool to evaluate α-particle generation in laser-driven proton–boron fusion experiments. We also show the production of 11C radioisotopes, $\approx 6 \times 10^{6}$ , and of 44Sc radioisotopes, $\approx 5 \times 10^{4}$ per laser shot. This result can open the way to develop laser-driven radiation sources of radioisotopes for medical applications.
1 January 2025 in Physics of Plasmas
The majority of studies on laser-driven proton–boron nuclear reaction is based on the measurement of α-particles with solid-state nuclear tracks detector (Cr39). However, Cr39's interpretation is difficult due to the presence of several other accelerated particles which can bias the analysis. Furthermore, in some laser irradiation geometries, cross-checking measurements are almost impossible. In this case, numerical simulations can play a very important role in supporting the experimental analysis. In our work, we exploited different laser irradiation schemes (pitcher–catcher and direct irradiation) during the same experimental campaign, and we performed numerical analysis, allowing to obtain conclusive results on laser-driven proton–boron reactions. A direct comparison of the two laser irradiation schemes, using the same laser parameters is presented.
16 August 2024 in Matter and Radiation at Extremes
The thermodynamic properties of boron nitride under extreme pressures and temperatures are of great interest and importance for materials science and inertial confinement fusion physics, but they are poorly understood owing to the challenges of performing experiments and realizing ab initio calculations. Here, we report the first shock Hugoniot data on hexagonal boron nitride at pressures of 5–16 Mbar, using hohlraum-driven shock waves at the SGIII-p laser facility in China. Our density functional theory molecular dynamics calculations closely match experimental data, validating the equations of state for modeling the shock response of boron nitride and filling a crucial gap in the knowledge of boron nitride properties in the region of multi-Mbar pressures and eV temperatures. The results presented here provide fundamental insights into boron nitride under the extreme conditions relevant to inertial confinement fusion, hydrogen–boron fusion, and high-energy-density physics.
28 April 2025 in Matter and Radiation at Extremes
Driving of the nuclear fusion reaction p + 11B → 3α + 8.7 MeV under laboratory conditions by interaction between high-power laser pulses and matter has become a popular field of research, owing to its numerous potential applications: as an alternative to deuterium–tritium for fusion energy production, astrophysics studies, and alpha-particle generation for medical treatment. One possible scheme for laser-driven p–11B reactions is to direct a beam of laser-accelerated protons onto a boron (B) sample (the so-called “pitcher-catcher” scheme). This technique has been successfully implemented on large high-energy lasers, yielding hundreds of joules per shot at low repetition. We present here a complementary approach, exploiting the high repetition rate of the VEGA III petawatt laser at CLPU (Spain), aiming at accumulating results from many interactions at much lower energy, to provide better control of the parameters and the statistics of the measurements. Despite a moderate energy per pulse, our experiment allowed exploration of the laser-driven fusion process with tens (up to hundreds) of laser shots. The experiment provided a clear signature of the reactions involved and of the fusion products, accumulated over many shots, leading to an improved optimization of the diagnostics for experimental campaigns of this type. In this paper, we discuss the effectiveness of laser-driven p–11B fusion in the pitcher–catcher scheme, at a high repetition rate, addressing the challenges of this experimental scheme and highlighting its critical aspects. Our proposed methodology allows evaluation of the performance of this scheme for laser-driven alpha particle production and can be adapted to high-repetition-rate laser facilities with higher energy and intensity.
7 July 2021 in High Power Laser Science and Engineering
We present an experimental study of the dynamics of shocks generated by the interaction of a double-spot laser in different kinds of targets: simple aluminum foils and foam–aluminum layered targets. The experiment was performed using the Prague PALS iodine laser working at 0.44 μm wavelength and irradiance of a few 1015 W/cm2. Shock breakouts for pure Al and for foam-Al targets have been recorded using time-resolved self-emission diagnostics. Experimental results have been compared with numerical simulations. The shocks originating from two spots move forward and expand radially in the targets, finally colliding in the intermediate region and producing a very strong increase in pressure. This is particularly clear for the case of foam layered targets, where we also observed a delay of shock breakout and a spatial redistribution of the pressure. The influence of the foam layer doped with high-Z (Au) nanoparticles on the shock dynamics was also studied.
18 July 2025 in High Power Laser Science and Engineering
High-energy, short-pulse laser-driven proton–boron (p– 11 B) fusion has attracted growing interest due to its aneutronic character and potential for clean energy generation. In this study, we report on two experimental campaigns carried out at the LFEX laser facility using petawatt-class laser systems (energy $\sim$ 1.2–1.4 kJ, pulse duration 2.7 ps, peak intensity $\sim$ (2–3) × 10 19 W/cm 2 ). The experiments explored the influence of complex target geometries – including spherical, cylindrical and wedge-shaped configurations – on α-particle yield. Our results demonstrate that spherical targets can enhance α-particle production by up to two orders of magnitude compared to planar targets of identical composition and also lead to a noticeable shift of the α-particle energy spectrum toward higher values. Furthermore, we implemented a novel diagnostic technique for unambiguous α-particle detection using a CR-39 detector integrated into a Thomson parabola spectrometer. Particle-in-cell simulations performed with the Smilei code provide additional insight into the role of self-generated magnetic fields in modulating particle dynamics. These simulations highlight the critical interplay among target geometry, confinement effects and fusion efficiency. Overall, our findings underscore the potential of optimized target designs to significantly enhance fusion yield and α-particle output in p– 11 B fusion, with promising implications for the development of laser-driven α-particle sources and advanced clean energy concepts.