14 June 2019 in IEEE Transactions on Power Electronics
Nine-switch converter (NSC) has been presented as a dual-output converter with common frequency (CF) or different frequency (DF) operation modes. This paper proposes a novel space-vector modulation (SVM) method for the NSC that supports both the CF and DF modes. This method is based on the simplification of the space-vector diagram of NSC into that of six-switch converter, and the SVM method for NSC can be done like conventional SSC. The proposed voltage vector selection method without using common logical xor operation and the calculation method for dwelling times of voltage vectors are described in detail. In addition, the modulation indices for two ac terminals of NSC have been analyzed deeply, and the derived fitting equations can guide engineering application. The performance of the proposed SVM is verified by the simulation and experimental results, and the low total harmonic distortions and harmonic components for phase currents prove the effectiveness of the proposed method.
16 March 2020 in IEEE Transactions on Industrial Electronics
In this paper, the equivalent mechanism between Nine-Switch Converter (NSC) and the two Six-Switch Converters (SSCs) is explained in detail. In order to achieve the decoupling of the Upper and Lower AC terminals, the concept of Virtual-Leg is proposed and the decoupling model of NSC is established based on Virtual-Legs. In this model, the NSC is equivalent to dual constrained SSCs. Continually, the Space vector modulation (SVM) method of NSC is proposed based on dual constrained SSCs modulation for both Common Frequency (CF) and Different Frequency (DF) modes. In the proposed modulation method, the concept of Space Vector Distance Function (SVDF) is proposed. SVDF represents the actual switching times between any two actual working states of NSC. The closer distance between the two actual states is, the smaller actual switching loss will be. Using the modulation method, the NSC can realize the independent control of two sets of three-phase AC voltage and achieve the same control performance as the dual SSCs. The validity of the proposed converter is verified through simulations and experiments.
9 December 2019 in IEEE Transactions on Power Electronics
This paper proposes a doubly fed induction generator (DFIG) wind energy conversion system (WECS) based on nine-switch converter (NSC). In this paper, a new concept of Virtual-Leg is proposed, and the equivalent mechanism between the NSC and the dual six-switch converter is first proposed in this research. Furthermore, a mathematical model of the NSC based on the unipolar binary logic switching function is established. In order to simplify the mathematical model of the NSC-based DFIG-WECS, the parameters mapping relationship between the NSC with loads and the NSC-based DFIG-WECS under dq coordinate system is given. Meanwhile, the Adaptive Resonant PI (AR-PI) current controller based on the resonant controller, the PI controller, and the adaptive genetic algorithm is applied for the DFIG wind generation system. As a result, harmonic current content, overshoot, and dynamic response speed of the NSC-based DFIG-WECS have been significantly improved. Finally, the simulations and experimental results verify the validity and reliability of the proposed mathematical model and control algorithm.
12 April 2024 in Journal of Electrical Engineering & Technology
8 March 2019 in IEEE Journal of Emerging and Selected Topics in Power Electronics
A new topology of a three-level neutral-point-clamped fifteen-switch inverter is proposed. The FSI topology consists of three legs, of which each consists of five switches and two diodes. Afifteen-switch invertercan independently drive two three-phase loads. In addition, a new space vector modulation method suitable for thefifteen-switch inverter to drive two three-phase loads is described in detail; moreover, the space vector modulation method is suitable for both common-frequency and difference-frequency working modes of an FSI. The application on independent control of two three-phase loads for an FSI is verified well by simulations and experiments.
14 February 2023 in Measurement Science and Technology
Pointer meter automatic recognition (PMAR) in outdoor environments is a challenging task. Due to variable weather and uneven lighting factors, hand-crafted features or shallow learning techniques have low accuracy in meter recognition. In this paper, a multitask cascading convolutional neural network (MC-CNN) is proposed to improve the accuracy of meter recognition in outdoor environments. The proposed MC-CNN uses cascaded CNN, including three stages of meter detection, meter cropping and meter reading. Firstly, the YOLOV4 Network is used for meter detection to quickly determine the meter location from captured images. In order to accurately cluster pointer meter prior boxes in the YOLOV4 Network, an improved K-means algorithm is presented to further enhance the detection accuracy. Then, the detected meter images are cropped out of the captured images to remove redundant backgrounds. Finally, a meter-reading network based on an adaptive attention residual module (AARM) is proposed for reading meters from cropped images. The proposed AARM not only contains an attention mechanism to focus on essential information and efficiently diminish useless information, but also extracts information features from meter images adaptively. The experimental results show that the proposed MC-CNN can effectively achieve outdoor meter recognition, with high recognition accuracy and low relative error. The recognition accuracy can reach 92.6%. The average relative error is 2.5655%, which is about 3% less than the error in other methods. What is more, the proposed approach can obtain rich information about the type, limits, units and readings of the pointer meter and can be used when multiple pointer meters exist in one captured image simultaneously. Additionally, the proposed approach can significantly improve the accuracy of the recognized readings, and is also robust to natural environments.