Nine-switch converter (NSC) has been presented as a dual-output converter with common frequency (CF) or different frequency (DF) operation modes. This paper proposes a novel space-vector modulation (SVM) method for the NSC that supports both the CF and DF modes. This method is based on the simplification of the space-vector diagram of NSC into that of six-switch converter, and the SVM method for NSC can be done like conventional SSC. The proposed voltage vector selection method without using common logical xor operation and the calculation method for dwelling times of voltage vectors are described in detail. In addition, the modulation indices for two ac terminals of NSC have been analyzed deeply, and the derived fitting equations can guide engineering application. The performance of the proposed SVM is verified by the simulation and experimental results, and the low total harmonic distortions and harmonic components for phase currents prove the effectiveness of the proposed method.
16 March 2020 in IEEE Transactions on Industrial Electronics
In this paper, the equivalent mechanism between Nine-Switch Converter (NSC) and the two Six-Switch Converters (SSCs) is explained in detail. In order to achieve the decoupling of the Upper and Lower AC terminals, the concept of Virtual-Leg is proposed and the decoupling model of NSC is established based on Virtual-Legs. In this model, the NSC is equivalent to dual constrained SSCs. Continually, the Space vector modulation (SVM) method of NSC is proposed based on dual constrained SSCs modulation for both Common Frequency (CF) and Different Frequency (DF) modes. In the proposed modulation method, the concept of Space Vector Distance Function (SVDF) is proposed. SVDF represents the actual switching times between any two actual working states of NSC. The closer distance between the two actual states is, the smaller actual switching loss will be. Using the modulation method, the NSC can realize the independent control of two sets of three-phase AC voltage and achieve the same control performance as the dual SSCs. The validity of the proposed converter is verified through simulations and experiments.
The term "mobile robot" or "intelligent mobile robot" refers to an autonomous system with specific sensory skills that can move independently in an environment that contains obstacles and can perform certain activities, and belongs to the category of intelligent robots. The use of mobile robots combines expertise from many different academic fields, including strongly integrated techniques in biology, anthropology, computer science, control theory, power transmission, measurement, and sensing. At present, there are already cases of using mobile robots to perform various simple tasks, but due to the low efficiency of optimal path planning, the scope of application cannot be further expanded. Therefore, based on the improved gray wolf algorithm and self-powered sensor technology, this paper optimized the optimal path planning method and energy driving method of the mobile robot, so that the mobile robot can be applied in complex environments. The experiment compared the improved path planning algorithm in this paper with the traditional path planning algorithm. The results show that the optimal path planning using the improved gray wolf algorithm can search the random tree algorithm, the improved bee colony algorithm and the multi-objective based on edge distribution estimation faster. Compared with the optimization algorithm, the optimization effect was increased by 14.84%. It is beneficial to the optimal path planning of mobile robots in complex environments.
9 December 2019 in IEEE Transactions on Power Electronics
This paper proposes a doubly fed induction generator (DFIG) wind energy conversion system (WECS) based on nine-switch converter (NSC). In this paper, a new concept of Virtual-Leg is proposed, and the equivalent mechanism between the NSC and the dual six-switch converter is first proposed in this research. Furthermore, a mathematical model of the NSC based on the unipolar binary logic switching function is established. In order to simplify the mathematical model of the NSC-based DFIG-WECS, the parameters mapping relationship between the NSC with loads and the NSC-based DFIG-WECS under dq coordinate system is given. Meanwhile, the Adaptive Resonant PI (AR-PI) current controller based on the resonant controller, the PI controller, and the adaptive genetic algorithm is applied for the DFIG wind generation system. As a result, harmonic current content, overshoot, and dynamic response speed of the NSC-based DFIG-WECS have been significantly improved. Finally, the simulations and experimental results verify the validity and reliability of the proposed mathematical model and control algorithm.
The navigation and positioning system of mobile robot using multi-sensor fusion has become a research hotspot in the aspects of high accuracy, low computational complexity and strong stability. In order to improve the accuracy of sensor asynchronous information fusion and meet the application requirements of geometric structure feature degradation in warehousing logistics, an adaptive weighted factor graph (AWFG) positioning method using IMU, LiDAR and stereo camera is proposed. Combining the dominant features of three sensors and factor graph theory, a new multi-sensor fusion factor graph model is established. By dynamically adjusting the reliability of sensor measurement information, an adaptive factor weight function is designed to improve the positioning accuracy and system stability under abnormal sensor or environmental interference condition. Besides, sliding window optimization is added to limit the factor scale, and variable elimination algorithm is combined to optimize the factors in the window to further reduce the computational complexity. Compared with extended Kalman filter (EKF) and particle swarm optimization (PSO) algorithms, simulation and experimental results show that the proposed method not only reduces the mean location error by about 30%, but also effectively enhances the computational efficiency and system stability.