Deformation twinning plays a vital role in accommodating plastic deformation of hexagonal-close-packed (hcp) metals, but its mechanisms are still unsettled under high strain rate shock compression. Here we investigate deformation twinning in shock-compressed Mg as a typical hcp metal with in situ, ultrafast synchrotron x-ray diffraction. Extension twinning occurs upon shock compression along and , but only upon release for loading along . Such deformation mechanisms are a result of the polarity of deformation twinning, which depends on directionality and relative magnitude of resolved shear stress and may be common for Mg and its alloys in a wide range of strain rates.
We investigate shock-induced deformation of columnar nanocrystalline Al with large-scale molecular dynamics simulations and implement orientation mapping (OM) and selected area electron diffraction (SAED) for microstructural analysis. Deformation mechanisms include stacking fault formation, pronounced twinning, dislocation slip, grain boundary (GB) sliding and migration, and lattice or partial grain rotation. GBs and GB triple junctions serve as the nucleation sites for crystal plasticity including twinning and dislocations, due to GB weakening, and stress concentrations. Grains with different orientations exhibit different densities of twins or stacking faults nucleated from GBs. GB migration occurs as a result of differential deformation between two grains across the GB. High strain rates, appropriate grain orientation and GBs contribute to deformation twinning. Upon shock compression, intra-grain dislocation and twinning nucleated from GBs lead to partial grain rotation and the formation of subgrains, while whole grain rotation is not observed. During tension, stress gradients associated with the tensile pulse give rise to intra-grain plasticity and then partial grain rotation. The simulated OM and SAED are useful to describe lattice/grain rotation, the formation of subgrains, GB migration and other microstructures.
1 December 2021 in Journal of Materials Science & Technology
The classical transitions have been considered as a model for general structural phase transformations, and resolving corresponding phase transition mechanisms under high strain rate shock compression is critical to a fundamental understanding of phase transition dynamics. Here, we use subnanosecond synchrotron x-ray diffraction to visualize the lattice response of single-crystal KCl to planar shock compression. Complete orientation relations are revealed for KCl under shock compression along and ; the orientation relations and transition mechanisms are anisotropic and can be described with the standard and modified Watanabe-Tokonami-Morimoto model, respectively, both involving interlayer sliding and intralayer ion rearrangement. The current study also establishes a paradigm for investigating solid-solid phase transitions under dynamic extremes with ultrafast synchrotron x-ray diffraction.
5 January 2024 in International Journal of Mechanical Sciences
Plate-impact experiments were conducted to study the features and mechanisms of void nucleation and growth in the polycrystalline of pure aluminum under dynamic loading. Soft-recovered samples have been analyzed by metallographic microscopy, electron back scattering diffraction (EBSD), and synchrotron radiation x-ray tomography technology. It was found that most of the void nucleation in grains neared the boundaries of “weak-orientation” grains and grew toward the grain boundaries with fractured small grains around the boundaries. This was mainly caused by the accumulation and interaction of slip systems in the “weak-orientation” grains. In addition, the micro voids were nearly octahedron because the octahedral slip systems were formed by 8 slip planes in the polycrystalline of pure aluminum. The EBSD results are consistent with the three-dimensional structure observed by synchrotron radiation x-ray.