Chao Peng

Chao Peng

Auto-generated profile, based on publicly available information

Chao Peng

China Electronic Product Reliability and Environmental Testing Research Institute 1 , Guangzhou 510610

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 May 2021 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
SYShaozhong Yue
Shaozhong Yue
ZZZhangang Zhang
Zhangang Zhang
ZCZiwen Chen
Ziwen Chen
Xuefeng ZhengXuefeng Zheng
Xuefeng Zheng
LWLei Wang
Lei Wang
ZLZhifeng Lei
Zhifeng Lei
Heavy ion-induced electrical degradations and mechanisms of high-electron-mobility transistors (HEMTs) were investigated in this article. AlGaN/GaN HEMTs were irradiated by 800-MeV Bi ions with total fluence of 5.23×10 10 ions/cm 2 . The results show that the saturation current decreased by 13.1%, the threshold voltage negatively shifted by 0.21 V, the peak transconductance decreased by 26.6%, the reverse gate-leakage current increased much more than 16 times, and forward gate-leakage current increased more than three times. Furthermore, all electrical performances experienced partial recovery after room temperature annealing (RTA) and 175 °C thermal annealing except gate-leakage current. To further explore the mechanism of gate-leakage degradation, AlGaN/GaN heterojunction wafers were exposed to 1400-MeV Ta ions with fluence of 6.86×107 ions/cm 2 , and characterized by conductive atomic force microscope (CAFM) before and after the irradiation. The results show that the leakage current significantly increased in AlGaN material areas after the irradiation. Comparing the increase in gate leakage of the AlGaN/GaN heterojunction and AlGaN/GaN HEMT induced by heavy ions irradiation, it can be seen that the gate-leakage current of AlGaN/GaN HEMT after heavy irradiation almost entirely was caused by latent tracks. The mechanism for the irreversible increase in gate leakage after heavy ions irradiation could be attributed to the latent tracks along the ion trajectories through the heterojunction.

21 May 2021 in IET Power Electronics
Verified
Journal Article
Open access
PDF file
CPChao Peng
Chao Peng
ZLZhifeng Lei
Zhifeng Lei
ZCZiwen Chen
Ziwen Chen
SYShaozhong Yue
Shaozhong Yue
ZZZhangang Zhang
Zhangang Zhang
YHYun Huang
Yun Huang
The single event burnout (SEB) effects of SiC power MOSFET are investigated by irradiations. An SEB is observed when drain biased above 400 V for 181 Ta ion irradiation. The failure analysis shows a melting “hole” near the gate region due to the thermal runaway. Based on TCAD simulations, the impact ionization and parasitic bipolar are the key factors to trigger SEB in SiC MOSFET. Unlike the impact ionization, the turning on of the parasitic bipolar is not necessary for an SEB. But it will significantly reduce the threshold of SEB. Except for SEB, another permanent damage mode is also observed, which is manifested as the increase of leakage current and the abnormal of the output characteristics. This damage may be related to the latent track produced by heavy ion according to the failure analysis. The SEBs are observed for proton irradiations. The maximum LET value of the proton‐induced secondary ions can reach 13.9 MeV cm 2 /mg for 100 MeV proton. The simulations imply that most of the secondary ions can contribute to SEB. The biggest discrepancy from heavy ion irradiation is that no leakage current increases and output characteristics degradations are observed for the device without SEB after proton irradiation.

11 April 2022 in IEEE Transactions on Nuclear Science
Verified
Journal Article
Closed access
CPChao Peng
Chao Peng
ZLZhifeng Lei
Zhifeng Lei
ZZZhangang Zhang
Zhangang Zhang
Yiqiang ChenYiqiang Chen
Yiqiang Chen
YHYujuan He
Yujuan He
YEYunfei En
Yunfei En
Radiation-induced leakage current degradations for SiC power MOSFETs are investigated by 181 Ta ion irradiation. An ion flux-related leakage degradation is reported for the first time. It is manifested as a more significant leakage current under higher flux irradiation than that under low flux irradiation, even though the total fluence is the same. Emission microscope (EMMI) results show that more leakage paths are formed for high flux irradiation. The drain bias during irradiation is another key fact to affect the radiation-induced leakage degradation. The leakage only occurs when the drain bias is larger than 300 V for flux = 1000/cm $^{2}\cdot \text{s}$ irradiation. An interesting phenomenon is that although radiation-induced leakage is not observed at 200 V with ion flux of 1000/cm $^{2}\cdot \text{s}$ , leakage appears when the ion flux increases to 6000/cm $^{2}\cdot \text{s}$ . A multi-ion interaction theory is proposed to explain the above phenomenon. The mechanisms of these phenomena are also proved by TCAD simulations.

24 June 2024 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
XLXing Li
Xing Li
WFWeili Fu
Weili Fu
SYShaozhong Yue
Shaozhong Yue
XZXiaoning Zhang
Xiaoning Zhang
XLXi Liang
Xi Liang
JYJia-Yue Yang
Jia-Yue Yang
In the complex space radiation environment, space electronic devices are inevitably damaged by energetic particles, such as protons, leading to degradation of electrical performance. However, previous studies have rarely explored the effect of proton irradiation on the electrical properties of $\bm{\beta} $ -Ga $_{\text{2}}$ O $_{\text{3}}$ Schottky barrier diodes (SBDs), and the underlying mechanisms remain largely unexplored. This article investigates the effect of 300-MeV proton irradiation on the electrical properties of the $\bm{\beta} $ -Ga $_{\text{2}}$ O $_{\text{3}}$ SBD. The degradation mechanisms are evaluated through current–voltage ( I – V ), capacitance–voltage ( C – V ), and deep-level transient spectroscopy (DLTS) measurements. After 300-MeV proton irradiation with the influence of 1 $\times$ 10 $^{\text{13}}$ p/cm $^{\text{2}}$ , the SBD devices show significant reduc-tion in forward current density and breakdown voltage ( V $_{\text{\text{br}}}$ ). The degradation is related to the decrease in carrier concentration due to the generation of body defects in the epitaxial layer caused by proton irradiation. In addition, further DLTS measurement shows that the body defects induced by 300-MeV proton irradiation are deep energy level defects, energy level ( E $_{\textit{C}}$ – E $_{\textit{T}}$ ) increases from 0.758 to 1.345 eV, and the defect concentration increases from 1.08 $\times$ 10 $^{\text{13}}$ cm $^{-\text{3}}$ to 1.51 $\times$ 10 $^{\text{13}}$ cm $^{-\text{3}}$ .

26 August 2024 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
XLXing Li
Xing Li
WJWeibo Jiang
Weibo Jiang
YWYuangang Wang
Yuangang Wang
HZHong Zhang
Hong Zhang
CPChao Peng
Chao Peng
JYJia-Yue Yang
Jia-Yue Yang
Single-Event Burnout (SEB) can cause hard damage to devices, leading to permanent failure. However, previous studies have rarely explored the effects of high-energy proton irradiation-induced SEB in β-Ga2O3 Schottky Barrier Diode (SBD), and the underlying mechanisms remain largely unexplored. Experimental results indicate that the reverse bias voltage during irradiation is a critical factor influencing the failure of β-Ga2O3 SBD. Compared to 300 MeV proton irradiation without bias, the introduction of a 300 V reverse bias voltage results in a significant reduction in forward current density (JF). When the reverse bias voltage reaches 400 V or higher, the 300 MeV proton induces SEB in the device. The SEM image of the damaged region reveals that the irradiated device has “voids” formed due to the melting of the Ga2O3 material. Geant 4 and TCAD simulation results indicate that the burnout phenomenon is caused by the elevated lattice temperature inside the device, which results from the implantation of secondary particles under a high reverse bias voltage. As the reverse bias voltage increases, the maximum lattice temperature of β-Ga2O3 SBD also rises. When the reverse bias voltage is sufficiently high, the local lattice temperature inside the device reaches the melting point of Ga2O3 material, ultimately leading to SEB.

18 February 2020 in IEEE Transactions on Nuclear Science
Verified
Journal Article
Closed access
SYShaozhong Yue
Shaozhong Yue
ZLZhifeng Lei
Zhifeng Lei
CPChao Peng
Chao Peng
XZXiangli Zhong
Xiangli Zhong
JWJinbin Wang
Jinbin Wang
LHLiang Hu
Liang Hu
The electrical characteristics and low-frequency noise (LFN) of AlGaN/GaN high-electron-mobility transistors (HEMTs) after 3-MeV proton irradiation up to a total dose of 5.0W1014 p/cm2 have been studied in this paper. The devices experienced a 14.6% decrease in saturation current, a 0.35V positive shift of the threshold voltage (Vth) and a significant decrease in reverse gate leakage current after 3-MeV proton irradiation. Extracted by the LFN method, the flat-band voltage noise power spectral density (SVfb) increases from 4.112W10-12 7Hz -1 to 5.603W10-12 7Hz -1, the trap density increases from 2.79W1017 to 3.84W1017 cm-3 7eV-1 after the radiation. The main degradation mechanism is considered to be the increase of negatively charged trap density in the channel, which depletes more electrons and reduces the carrier mobility in the channel 2-dimensional electron gas (2DEG). We also extracted the radiation-induced trapped charge density according to the theoretical calculation; the result is consistent with the LFN measurement.