Moisture equilibrium curve of oil paper (MEC-OP) is an important and commonly used foundational curve in transformer design and condition assessment. For AC transformers, the MEC-OP is weakly affected by the electric field, so only considering the temperature. However, for the converter transformer, the DC electric field present inside has not yet been considered. Therefore, Based on a new method of moisture distribution measurement by terahertz spectroscopy, a novel curve of MEC-OP considering the effect of DC electric field is obtained. The results show that the moisture in oil and paper increases as the field strength grows, the reason leading to the rise of moisture may be the effect of electric field force and dielectrophoretic force, while molecular simulation calculation is employed to support in explaining the experimental phenomena. Then, the coefficient of the field strength affecting the moisture content is introduced to correct the MEC-OP, and the moisture of cardboard calculated at 25 kV/mm under 40°C, 60°C, and 80°C increases by 15.65%, 19.68%, and 32.92%, respectively. This research fills a gap in the effect of DC electric field on the MEC-OP under the converter transformer and provides support for the accurate calculation of the moisture in insulating paper.
10 January 2024 in IEEE Transactions on Dielectrics and Electrical Insulation
Moisture intrusion into the silicone rubber (SR) sheath may trigger composite insulator failure, so it is especially crucial to study the water absorption and permeability characteristics of SR under different conditions to prevent and control the failure, however, there are few studies on the influence of electric field. In this work, the effect of electric field on the water absorption and permeability characteristics of SR is reported. The results show that the electric field has an inhibitory effect on the water absorption of SR, the diffusion coefficient and the percentage of saturated water absorption decrease by 34.4% and 82.6%, respectively, with the increase of the electric field intensity. Meanwhile, the permeability characteristics of moisture through SR are studied, and it is found that the permeation rate increases with the increase of forward voltage, while the reverse voltage is the opposite. Finally, molecular simulation is utilized to calculate the diffusion coefficient, free volume and intermolecular interaction energy of the SR system containing water under the effect of different electric fields, which further verifies the accuracy of the experimental results. By this study, the variation rules of water absorption and permeability of SR under the effect of electric field are supplemented.
10 April 2025 in IEEE Transactions on Terahertz Science and Technology
Moisture content is a decisive factor for the electrical performance of oil–paper insulation. As a strongly polar substance, moisture can easily accumulate in areas with high field strength, distorting the local electric field and triggering electrical discharges. However, due to the lack of suitable nondestructive observation means, no experimental and observational studies have been conducted on the effect of the electric field on the migration and aggregation behavior of moisture in insulating pressboard. In this work, a terahertz imaging technique is introduced to observe the diffusive migration of moisture in insulating pressboard and focus on the effect of the AC electric field on this process. Results show that moisture migration in insulating pressboard consists of two parts: migration from solid-phase insulating pressboard to liquid-phase insulating oil and migration occurring in solid-phase insulating pressboard. The addition of the AC electric field considerably increases the diffusion rate of moisture and accelerates the migration of moisture from the solid phase to the liquid phase. Moreover, the electric field makes the moisture in the solid-phase pressboard migrate and accumulate toward the high-field-strength region near electrodes, and this process is accelerated by the increase in temperature. Under the experimental conditions of this study, the maximum relative deviation between the moisture content in the pressboard near both sides of the electrode and the average moisture content is 34.7%.
Real-time monitoring of aeolian vibrations is critical for the structural health of overhead transmission lines, yet achieving long-term, self-sustained sensing in high-voltage environments remains a persistent challenge. Herein, we report a fully autonomous, wireless vibration monitoring system driven by a dual-mode broadband triboelectric nanogenerator (TENG), which seamlessly integrates broadband energy harvesting, multi-parameter sensing, and wireless transmission. By coupling a freestanding layered structure with mechanical switching strategies and complementary dynamic configurations, the TENG achieves instantaneous discharge (ID) and continuous discharge (CD) modes with distinct sensing functionalities. The ID mode is used for frequency sensing with a response range of 5–88 Hz and an error of 0.991 and a nonlinear error of δ<3.59%. Beyond the device level, a customized low-loss power management module is developed to boost the charging rate by 7.96 times, successfully driving Bluetooth and infrared communication modules. Significantly, the system was deployed on a live 110 kV transmission line for field testing, demonstrating stable, continuous operation under varying environmental conditions. This work bridges the gap between laboratory-scale TENG innovation and deployable, industrial-relevant high-voltage monitoring systems.