Mesut Düzgün

Mesut Düzgün

Auto-generated profile, based on publicly available information

Mesut Düzgün

Gazi Üniversitesi

Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 January 2012 in Journal of Mechanical Science and Technology
Verified
Journal Article
Closed access
PDF file
MDMesut Duzgun
Mesut Duzgun

1 February 2010 in International Journal of Automotive Technology
Verified
Journal Article
Closed access
PDF file
YYY. Yildiz
Y. Yildiz
MDM. Duzgun
M. Duzgun

12 April 2022 in Journal of Thermal Science and Engineering Applications
Verified
Journal Article
Closed access
PDF file
Yusuf ÇATIYusuf ÇATI
Yusuf ÇATI
Stefan aus der WiescheStefan aus der Wiesche
Stefan aus der Wiesche
MDMesut Düzgün
Mesut Düzgün
Increases in travel speeds and traffic density in railway sector impose challenges on the modern disk-pad brake systems such as higher temperatures and stresses resulting in cracks/hot spots and a degraded system performance. The prediction of disk thermal behavior under challenging conditions has become an important engineering issue. In this study, a model is developed using the finite difference method with realistic time-dependent boundary conditions and different experimental convection correlations with non-uniform time-step size features. A previous numerical/experimental study on the thermal behavior of railway disk brake is partly adopted and enhanced. The results of the developed model agree well with the results of the previous study. A practical prediction method for thermal stresses in the disk is applied using the axial temperature distributions at several time instants from locations with highest temperature. Apart from that, same configuration of the disk with the pad is modeled in simcenter star-ccm+ which is a well-validated commercial computational fluid dynamics software to compare the results and computation times with that of the developed model. Using this model, an investigation has been conducted on the effect of temperature-dependent material properties on thermal behavior of the disk. The developed numerical model can simulate the conditions experienced by a railway disk in a relatively new standard (EN 14535-3) considering the transient thermal behavior and axial thermal stress distribution with relatively low computational time and reasonable accuracy. Also, in this study, valuable insights are obtained on the effect of variable thermal properties of the disk and convection correlations on the disk thermal behavior.

30 April 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Yusuf ÇATIYusuf ÇATI
Yusuf ÇATI
MDMesut Düzgün
Mesut Düzgün
Frederic KrachtFrederic Kracht
Frederic Kracht
The rail vehicle industry wants to produce vehicles with higher speeds, to maintain and increase its market share. However, when the speed of the vehicle increases, it may have an undesirable effect on ride comfort, in terms of ride dynamics. Recent developments towards lighter and faster vehicles make the problem of ride comfort at higher speeds increasingly important. Focusing on the behavior of flexible rather than rigid body behavior should not be neglected when designing long and light car bodies. There are several approaches to incorporate body flexibility in multibody simulations and they have some superiorities and weaknesses. In this study, an efficient and accurate vertical dynamic model for the ride comfort analysis is developed and implemented in a commercial object-oriented modeling (OOM) software Dymola (2015 FD01) which uses the open-source code Modelica. This model includes car body flexibility with the assembling of a rigid body approach. The developed model is compared to a three-dimensional vehicle model in the commercial Vampire software (Pro V5.50) at different velocities. For the vertical ride comfort analysis, the ISO 2631-1 standard was used for both the developed model and the three-dimensional model. The results are presented as acceleration history and awrms—weighted r.m.s (root mean square) of accelerations—as required by the standard. The developed model has shown its feasibility in terms of its efficiency and accuracy for the vertical ride comfort analysis. The accuracy of the model is evidenced by the fact that the car body vibration level at high speeds shows minor differences compared to the results of the Vampire, which is a validated commercial software in the area of rail vehicle dynamics. The approach involving the assembly of rigid bodies is applied for the first time for high-speed trains in dynamical modelling, with flexible car bodies for ride comfort analysis. Furthermore, it can be used for parametrical studies focusing on ride comfort, thereby offering a quite beneficial framework for addressing the challenges of ride comfort analysis in high-speed rail vehicles. Improvements for and analyses of other aspects are also possible, since the optimization and other useful libraries are readily available in Dymola/Modelica.

31 October 2021 in Isı Bilimi ve Tekniği Dergisi
Verified
Journal Article
Closed access
PDF file
MDMesut Duzgun
Mesut Duzgun
HKHalit Karabulut
Halit Karabulut
Theoretical and experimental investigations indicate that at high loads such as 3/4 throttling or more and high speeds such as 3000 rpm or more, the exhaust gas temperatures of the Internal Combustion engines are about 900-1000 K. The amount of heat wasted with exhaust gas of the Internal Combustion engines is equivalent to the power of them. By considering this feature of the Internal Combustion engines, a Hybrid engine consisting of an Internal Combustion (IC) engine and a gamma type Stirling engine was proposed and analyzed from the thermodynamic point of view. Hybrid engine is formed by combining the Stirling and IC engines via a common crankshaft and a common cylinder. The Internal Combustion engine may be a four stroke Diesel engine having an unconventional piston consisting of a crown and a rod. Via using this kind of pistons, two chambers are created in the same cylinder where one of them take part at above of the piston crown, while the other is taking part at below of the piston crown. In the combined engine presented here, the chamber at below of the piston crown is used as the expansion volume of the Stirling engine while the other chamber is being used as operational volume of the Diesel engine. In this study the thermodynamic performance of the Hybrid engine was investigated via using statistical values of common Diesel engines. For Stirling engine; 800 K heater surface temperature, 392 K cooler surface temperature, 800 W/m2K heat transfer coefficient in regenerator, 300 W/m2K heat transfer coefficient in cooler and heater, 250 rad/s engine speed and 12.5 bar air charging pressure were used as principal inputs. The output power of the Diesel engine was assumed to be 120 kW which provides 120 kW heat to Stirling engine. The heat transfer areas of cooler, heater and regenerator were optimized as 0.33 m2, 0.6 m2 and 4.6 m2 respectively. The optimum thermal efficiency and power of the Stirling engine were determined as 47 % and 24 kW. The total thermal efficiency of the combined engine is expected to increase 6 % compared to the stand-alone Internal Combustion engine. For 12.5 bar average gas pressure in the cylinder of Diesel engine, the working fluid mass in the Stirling engine was determined as 17g Teorik ve deneysel birçok araştırma içten yanmalı motorlarda ¾ ve daha fazla gaz kelebek açıklığında, 3000 rpm ve daha yüksek devirlerde egzoz gazı sıcaklığının 900-1000 K’e ulaştığını göstermektedir. İçten yanmalı motorlarda egzoz gazı ile atılan ısı yaklaşık olarak motorların güçlerine eşit miktardadır. İçten yanmalı motorların bu özellikleri göz önünde bulundurularak, bu çalışmada içten yanmalı bir motor ve bir stirling motorundan meydana gelen hibrit bir motorun termodinamik analizlerinin yapılması amaçlanmıştır. Bu hibrit motor; içten yanmalı motor ile stirling motorunun krank mili ve silindirinin ortak kullanımı ile meydana gelmektedir. İçten yanmalı motor geleneksel olmayan bir piston ve biyel mekanizmasından oluşan 4 zamanlı bir dizel motordur. Bu tip pistonlar kullanılarak aynı silindir içerisinde biri piston tepesinin üstünde diğeri pistonun alt tarafında olmak üzere iki oda oluşturulmaktadır. Bu çalışmada sunulan hibrit motorda pistonun altında kalan hacim stirling motorun genleşme hacmi olarak kullanılırken diğer oda dizel motorun çalışma hacmi olarak kullanılmaktadır. Bu çalışmada yaygın kullanımda olan bir dizel motorunun istatistiksel verileri kullanılarak stirling motorunun termodinamik performansı incelenmiştir. Stirling motoru için analiz girdileri olarak; 800 K ısıtıcı yüzey sıcaklığı, 392 K soğutucu yüzey sıcaklığı, 800 W/m2K rejeneratörün ısı transfer katsayısı, 300 W/m2K ısıtıcı ve soğutucunun ısı transfer katsayısı, 250 rad/s motor hızı ve 12.5 bar hava şarj basıncı kullanılmıştır. Dizel motorunun çıkış gücünün 120kW olduğu varsayılarak Stirling motoru için de 120 kW’lık giriş sıcaklık değeri kabul edilmiştir. Soğutucu, ısıtıcı ve rejeneratörün ısı transfer alanları sırası ile 0,33 m2, 0,6 m2 ve 4,6 m2 olarak optimize edilmiştir. Stirling motorunun optimum termal verimliliği ve motor gücü % 47 ve 24 kW olarak belirlenmiştir. Hibrit motorun toplam termal verimliliği yalnız içten yanalı motorun sağladığı değer ile karşılaştırıldığında %6 artmıştır. Dizel motorun silindi içerisindeki ortalama gaz basıncının 12,5 bar olduğu durumda Stirling motorundaki çalışma akışkanının kütlesi 17 g olarak belirlenmiştir.

21 June 2022 in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
Verified
Journal Article
Closed access
PDF file
HKHalit Karabulut
Halit Karabulut
MDMesut Düzgün
Mesut Düzgün
TTTolga Topgül
Tolga Topgül
Geleneksel gama tipi Stirling motorlarında iki silindir mevcut olup silindirlerden birisi aracılığı ile çalışma gazının sıkıştırılması ve genişletilmesi işlemleri, diğeri aracılığı ile çalışma gazının sabit hacimde ısıtılması ve soğutulması işlemleri gerçekleştirilmektedir. Geleneksel gama tipi motorlarda soğuk ve sıcak hacimlerin aynı silindirde bulunması nedeni ile sıcak uçtan soğuk uca iletimle önemli bir miktarda ısı kaybı olmaktadır. Ayrıca dispileyser’ in yapımı oldukça külfetli bir iştir. Bu problemleri yok etmek için, son zamanlarda sıcak ve soğuk hacimleri ayrı ayrı silindirlerde bulunan üç silindirli gama tipi bir motor modeli tanıtılmıştır. Bu motorlarda bulunan silindirlerden birisi sıcak hacim olarak bir diğeri soğuk hacim olarak üçüncüsü de güç silindiri olarak görev yapmaktadır. Bu motorların termodinamik süreçleri geleneksel gama tipi motorunkine çok benzediği için bunlara üç silindirli gama tipi motor adı verilmiştir. Her üç silindirin içerisinde alışılmış tipten pistonlar çalışmaktadır. Bu araştırmada geleneksel gama tipi bir motorun ve üç silindirli gama tipi bir motorun nodal termodinamik analizleri yapılarak performansları kıyaslanmıştır. Motorların çevrimlik işlerinin ve verimlerinin birbirine çok yakın olduğu görülmektedir. Yüksek hızlarda ve yüksek basınçlarında geleneksel gama tipi motorun, yüksek sıkıştırma oranında ise üç silindirli gama tipi motorun az miktarda avantajlı olduğu görülmektedir.