8 May 2023 in Nature Photonics
A major thrust of medical X-ray imaging is to minimize the X-ray dose acquired by the patient, down to single-photon sensitivity. Such characteristics have been demonstrated with only a few direct-detection semiconductor materials such as CdTe and Si; nonetheless, their industrial deployment in medical diagnostics is still impeded by elaborate and costly fabrication processes. Hybrid lead halide perovskites can be a viable alternative owing to their facile solution growth. However, hybrid perovskites are unstable under high-field biasing in X-ray detectors, owing to structural lability and mixed electronic–ionic conductivity. Here we show that both single-photon-counting and long-term stable performance of perovskite X-ray detectors are attained in the photovoltaic mode of operation at zero-voltage bias, employing thick and uniform methylammonium lead iodide single-crystal films (up to 300 µm) and solution directly grown on hole-transporting electrodes. The operational device stability exceeded one year. Detection efficiency of 88% and noise-equivalent dose of 90 pGyair are obtained with 18 keV X-rays, allowing single-photon-sensitive, low-dose and energy-resolved X-ray imaging. Array detectors demonstrate high spatial resolution up to 11 lp mm−1. These findings pave the path for the implementation of hybrid perovskites in low-cost, low-dose commercial detector arrays for X-ray imaging.
16 August 2024 in Nature Photonics
8 September 2020 in ACS Nano
2 May 2025 in Advanced Materials
Over the past decade, lead halide perovskites (LHPs) have become a vibrant thrust in the field of direct conversion X‐ray and gamma‐ray radiation detectors, offering promising cost‐effective and robust alternatives to traditional semiconductors. This review article chronicles the significant strides made since the inception of this field, emphasizing the material, structural, and functional advancements. It begins with an overview of the fundamental properties of perovskites that render them suitable for high‐energy radiation detection, such as their high atomic number, prominent charge carriers’ mobility and lifetime, and high resistivity. The review highlights key developments in material synthesis and processing techniques that have enhanced these detectors' stability, efficiency, and scalability. Furthermore, the review discusses the evolution of device architectures from single‐channel photodiodes to complex multi‐pixel arrays for imaging applications. The conclusion is focused on the remaining challenges that hamper the immediate progression of LHP radiation detectors to higher technology levels. This review is intended as a resource for academic researchers and industry stakeholders, summarizing the first decade of LHP detectors and forecasting the trajectory of this promising field, while remembering that forecasting the future trajectory, though challenging, is guided by current technological trends.
11 September 2025 in Advanced Materials
Modern clinical diagnostics significantly rely on X‐ray medical imaging detectors, which play a key role in obtaining high‐quality images while ensuring patient radiation exposure adheres to the “as low as reasonably achievable” principle. The last decade has seen a renewed exploration of promising materials for X‐ray detection, foremost focusing on lead‐based perovskites and other metal halides as direct‐conversion semiconductors and scintillators. However, the reported performance characteristics, particularly X‐ray sensitivity and the limit of dose rate detection, are often incomplete or misleading for assessing the practical utility of materials. This perspective surveys various approaches to the X‐ray detector characterization of emerging materials, specifically focusing on Detective Quantum Efficiency within the context of low‐dose medical imaging applications. Guidelines are provided for choosing, estimating, and presenting the relevant figures of merit, encompassing Detection Efficiency, Noise Equivalent Dose, response time, and spatial resolution, accompanied by ready‐to‐use computational tools, including a MATLAB application, a Mathcad worksheet, and an interactive website.